MICROSOFT SOFTWARE LICENSE TERMS
MICROSOFT POWER PLATFORM – @MICROSOFT/POWER-APPS-CLI
 
August 2025
These license terms are an agreement between you and Microsoft Corporation (or one of its affiliates). They 
apply to the software named above and any Microsoft services or software updates (except to the extent such 
services or updates are accompanied by new or additional terms, in which case those different terms apply 
prospectively and do not alter your or Microsoft’s rights relating to pre-updated software or services). IF YOU 
COMPLY WITH THESE LICENSE TERMS, YOU HAVE THE RIGHTS BELOW.  BY USING THE SOFTWARE, YOU 
ACCEPT THESE TERMS.
1.	INSTALLATION AND USE RIGHTS. 
a)	General. You may install and use any number of copies of the software to develop and test your 
applications.
b)	Third Party Components. The software may include third party components with separate legal 
notices or governed by other agreements, as may be described in the ThirdPartyNotices file(s) 
accompanying the software.
c)	Work or School Accounts. You can sign into the software with a work or school email address. If 
you do, you agree that the owner of the domain associated with your email address may control and 
administer your account, and access and process your data, including the contents of your 
communications and files. You further agree that your use of the software may be subject to: i) your 
organization’s guidelines and policies regarding the use of the software; and ii) the agreements 
Microsoft has with you or your organization, and in such case these terms may not apply.  If you 
already have a Microsoft account and you use a separate work or school email address to access the 
software, you may be prompted to update the email address associated with your Microsoft account to 
continue accessing the software.
2.	SCOPE OF LICENSE. The software is licensed, not sold. Microsoft reserves all other rights. Unless 
applicable law gives you more rights despite this limitation, you will not (and have no right to):
a)	work around any technical limitations in the software that only allow you to use it in certain ways;
b)	reverse engineer, decompile or disassemble the software, or otherwise attempt to derive the source 
code for the software, except and to the extent required by third party licensing terms governing use 
of certain open source components that may be included in the software;
c)	remove, minimize, block, or modify any notices of Microsoft or its suppliers in the software;
d)	use the software in any way that is against the law or to create or propagate malware; or
e)	share, publish, distribute, or lease the software (except for any distributable code, subject to the 
terms above), provide the software as a stand-alone offering for others to use, or transfer the 
software or this agreement to any third party.
3.	DATA. 
a)	Data Collection. The software may collect information about you and your use of the software, and 
send that to Microsoft. Microsoft may use this information to provide services and improve our 
products and services. You may opt-out of many of these scenarios, but not all, as described in the 
product documentation.  There are also some features in the software that may enable you to collect 
data from users of your applications. If you use these features to enable data collection in your 
applications, you must comply with applicable law, including providing appropriate notices to users of 
your applications. You can learn more about data collection and use in the help documentation and 
the privacy statement at https://go.microsoft.com/fwlink/?linkid=521839. Your use of the software 
operates as your consent to these practices.
b)	Processing of Personal Data. To the extent Microsoft is a processor or subprocessor of personal 
data in connection with the software, Microsoft makes the commitments in the European Union 
General Data Protection Regulation Terms of the Microsoft Products and Services Data Protection 
Addendum to all customers effective May 25, 2018, at 
https://go.microsoft.com/fwlink/?linkid=2135030.
4.	COMPLIANCE WITH TRADE LAWS. Microsoft products, software, technology, and services (“Items”) 
may be subject to U.S. and other countries’ export jurisdictions.  Each party will comply with all laws and 
regulations applicable to the import or export of the Items, including, without limitation, trade laws of the 
U.S., EU, and UK, such as the U.S. Export Administration Regulations, sanctions regulations administered 
by the U.S. Office of Foreign Assets Control, the EU Dual Use Regulation 2021/821, and/or other end-user, 
end use, and destination restrictions (“Trade Laws”) as well as the global legal compliance standards 
detailed in the Microsoft Standards of Business Conduct.  Customer will not, and will ensure its Affiliates 
will not, take any action that causes Microsoft to violate applicable Trade Laws.  Microsoft may suspend or 
terminate this agreement immediately without notice to the extent that Microsoft reasonably believes that 
performance would cause it to violate Trade Laws or put it at risk of becoming subject to sanctions and 
penalties under such laws.  Customer remains responsible for its and for its Affiliates’ compliance with this 
section and, to the extent applicable, the Regional Trade Compliance Addendum incorporated herein by 
reference. 
5.	SUPPORT SERVICES. Microsoft is not obligated under this agreement to provide any support services for 
the software. Any support provided is “as is”, “with all faults”, and without warranty of any kind.
6.	ENTIRE AGREEMENT. This agreement, and any other terms Microsoft may provide for supplements, 
updates, or third-party applications, is the entire agreement for the software.
7.	APPLICABLE LAW AND PLACE TO RESOLVE DISPUTES. If you acquired the software in the United 
States or Canada, the laws of the state or province where you live (or, if a business, where your principal 
place of business is located) govern the interpretation of this agreement, claims for its breach, and all 
other claims (including consumer protection, unfair competition, and tort claims), regardless of conflict of 
laws principles. If you acquired the software in any other country, its laws apply. If U.S. federal jurisdiction 
exists, you and Microsoft consent to exclusive jurisdiction and venue in the federal court in King County, 
Washington for all disputes heard in court. If not, you and Microsoft consent to exclusive jurisdiction and 
venue in the Superior Court of King County, Washington for all disputes heard in court.
8.	CONSUMER RIGHTS; REGIONAL VARIATIONS. This agreement describes certain legal rights. You 
may have other rights, including consumer rights, under the laws of your state or country. Separate and 
apart from your relationship with Microsoft, you may also have rights with respect to the party from which 
you acquired the software. This agreement does not change those other rights if the laws of your state or 
country do not permit it to do so. For example, if you acquired the software in one of the below regions, or 
mandatory country law applies, then the following provisions apply to you:
a)	Australia. You have statutory guarantees under the Australian Consumer Law and nothing in this 
agreement is intended to affect those rights.
b)	Canada. If you acquired this software in Canada, you may stop receiving updates by turning off the 
automatic update feature, disconnecting your device from the Internet (if and when you re-connect to 
the Internet, however, the software will resume checking for and installing updates), or uninstalling 
the software. The product documentation, if any, may also specify how to turn off updates for your 
specific device or software.
c)	Germany and Austria.
i.	Warranty. The properly licensed software will perform substantially as described in any Microsoft 
materials that accompany the software. However, Microsoft gives no contractual guarantee in 
relation to the licensed software.
ii.	Limitation of Liability. In case of intentional conduct, gross negligence, claims based on the 
Product Liability Act, as well as, in case of death or personal or physical injury, Microsoft is liable 
according to the statutory law.
Subject to the foregoing clause ii., Microsoft will only be liable for slight negligence if Microsoft is in 
breach of such material contractual obligations, the fulfillment of which facilitate the due performance 
of this agreement, the breach of which would endanger the purpose of this agreement and the 
compliance with which a party may constantly trust in (so-called "cardinal obligations"). In other cases 
of slight negligence, Microsoft will not be liable for slight negligence.
9.	DISCLAIMER OF WARRANTY. THE SOFTWARE IS LICENSED “AS IS.” YOU BEAR THE RISK OF 
USING IT. MICROSOFT GIVES NO EXPRESS WARRANTIES, GUARANTEES, OR CONDITIONS. 
TO THE EXTENT PERMITTED UNDER APPLICABLE LAWS, MICROSOFT EXCLUDES ALL IMPLIED 
WARRANTIES, INCLUDING MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND 
NON-INFRINGEMENT.
10.	LIMITATION ON AND EXCLUSION OF DAMAGES. IF YOU HAVE ANY BASIS FOR RECOVERING 
DAMAGES DESPITE THE PRECEDING DISCLAIMER OF WARRANTY, YOU CAN RECOVER FROM 
MICROSOFT AND ITS SUPPLIERS ONLY DIRECT DAMAGES UP TO U.S. $5.00. YOU CANNOT 
RECOVER ANY OTHER DAMAGES, INCLUDING CONSEQUENTIAL, LOST PROFITS, SPECIAL, 
INDIRECT, OR INCIDENTAL DAMAGES.
This limitation applies to (a) anything related to the software, services, content (including 
code) on third party Internet sites, or third party applications; and (b) claims for breach of 
contract, warranty, guarantee, or condition; strict liability, negligence, or other tort; or any 
other claim; in each case to the extent permitted by applicable law.
It also applies even if Microsoft knew or should have known about the possibility of the 
damages. The above limitation or exclusion may not apply to you because your state, 
province, or country may not allow the exclusion or limitation of incidental, consequential, or 
other damages.

Please note: As this software is distributed in Canada, some of the clauses in this agreement are 
provided below in French.
Remarque: Ce logiciel étant distribué au Canada, certaines des clauses dans ce contrat sont 
fournies ci-dessous en français.
EXONÉRATION DE GARANTIE. Le logiciel visé par une licence est offert « tel quel ». Toute 
utilisation de ce logiciel est à votre seule risque et péril. Microsoft n’accorde aucune autre 
garantie expresse. Vous pouvez bénéficier de droits additionnels en vertu du droit local sur la 
protection des consommateurs, que ce contrat ne peut modifier. La ou elles sont permises par le 
droit locale, les garanties implicites de qualité marchande, d’adéquation à un usage particulier et 
d’absence de contrefaçon sont exclues.
LIMITATION DES DOMMAGES-INTÉRÊTS ET EXCLUSION DE RESPONSABILITÉ POUR LES 
DOMMAGES. Vous pouvez obtenir de Microsoft et de ses fournisseurs une indemnisation en cas de 
dommages directs uniquement à hauteur de 5,00 $ US. Vous ne pouvez prétendre à aucune 
indemnisation pour les autres dommages, y compris les dommages spéciaux, indirects ou 
accessoires et pertes de bénéfices.
Cette limitation concerne:
•	tout ce qui est relié au logiciel, aux services ou au contenu (y compris le code) figurant sur 
des sites Internet tiers ou dans des programmes tiers; et
•	les réclamations au titre de violation de contrat ou de garantie, ou au titre de responsabilité 
stricte, de négligence ou d’une autre faute dans la limite autorisée par la loi en vigueur.
Elle s’applique également, même si Microsoft connaissait ou devrait connaître l’éventualité d’un 
tel dommage. Si votre pays n’autorise pas l’exclusion ou la limitation de responsabilité pour les 
dommages indirects, accessoires ou de quelque nature que ce soit, il se peut que la limitation ou 
l’exclusion ci-dessus ne s’appliquera pas à votre égard.
EFFET JURIDIQUE. Le présent contrat décrit certains droits juridiques. Vous pourriez avoir 
d’autres droits prévus par les lois de votre pays. Le présent contrat ne modifie pas les droits que 
vous confèrent les lois de votre pays si celles-ci ne le permettent pas.


DWT 28909173v1 0085000-001126


DWT 28909173v1 0085000-001126
