warning.network.unavailable.txt = 網路目前無法使用，請檢查連線。
warning.server.unavailable.txt = 無法連接到伺服器。請查驗伺服器與連接埠是否輸入正確。否則伺服器或網路可能無法使用。
warning.server.version.not.supported.txt = 選取的伺服器不支援安裝在此裝置上的 SAS Visual Analytics App 版本。請安裝最新版本的 SAS Visual Analytics App，然後連線到此伺服器。
warning.certificate.error.txt = 無法與此伺服器建立安全連線。請確認是否已安裝所有必要認證。
warning.unsupported.request.txt = 伺服器不支援嘗試的要求。
warning.unauthorized.txt = 登入失敗。使用者 ID 或密碼不正確。
warning.blacklisted.txt = 伺服器已封鎖存取此裝置。
warning.not.in.whitelist.txt = 伺服器尚未啟用從此裝置進行存取。
warning.denylisted.txt = 伺服器已封鎖存取此裝置。
warning.not.in.allowlist.txt = 伺服器尚未啟用從此裝置進行存取。
warning.resource.not.found.txt = 伺服器上找不到要求的資源。
warning.resource.not.accessible.txt = 無法在伺服器上存取要求的資源。請連絡 SAS 管理員。
warning.invalid.media.txt = 伺服器傳回的資料格式不正確。
warning.duplicate.connection.txt = 已經以此使用者 ID 加入伺服器。
warning.duplicate.connection.description.txt = 已存在有此描述的伺服器。
warning.duplicate.report.txt = 使用此名稱的報表已存在。
warning.duplicate.folder.txt = 使用此名稱的資料夾已存在。
warning.duplicate.collection.txt = 使用此名稱的收藏已存在。
warning.duplicate.subscribedfolder.txt = 使用此名稱的訂閱資料夾已存在。
warning.duplicate.insight.txt = 使用此名稱的洞察已存在。
warning.service.failure.txt = 嘗試完成要求時發生未預期的服務錯誤。
warning.password.storage.failed.txt = 無法儲存認證。
warning.password.lookup.failed.txt = 密碼查閱失敗。
warning.report.cannot.downgrade.txt = 無法存取報表。該報表是由較新版本的 SAS Visual Analytics 所建立。請連絡 SAS 管理員。
warning.request.cancelled.txt = 已取消要求。
warning.system.quiesced.txt = 已取消要求，因為應用程式正在關機。
warning.timeout.txt = 要求逾時。
warning.report.already.updating.txt = App 目前無法處理加入或更新此報表的要求。自動加入或自動更新已在進行中。請稍後再試。若問題持續存在，請連絡貴組織的 SAS 管理員。
warning.report.save.failed.msg = 無法將報表儲存至伺服器。
warning.connection.user.mismatch.msg = 您輸入了不同的使用者 ID。此伺服器執行個體預期您以 {0} 登入。
warning.cas.upload.failed.msg = 將資料檔案上傳至 Viya 的嘗試失敗。
warning.zdu.inprogress.msg = SAS Viya 伺服器正在進行維護，我們無法滿足您的要求。請稍後再試一次。
warning.invalid.arguments.txt = 資訊不足，無法完成要求。
warning.local.resource.expired.txt = 無法再使用本機資源初始化此要求。
warning.unable.to.cancel.request.complete.txt = 嘗試取消要求失敗，因為要求已完成。
warning.configuration.error.txt = 發生設定錯誤。
warning.complete.with.warnings.txt = 要求已完成但是有警告。
warning.status.unavailable.txt = 此要求的狀態無法使用。
warning.report.save.cannot.write.to.folder.msg = 無法存取資料夾或資料夾不存在。請指定其他資料夾。
warning.report.save.report.exists.msg = 所指定的報表名稱已存在。請選擇不同的名稱。
search.headers.localhost.txt = 在我的報表中
search.cells.infocell.error.txt = 搜尋此連線時發生錯誤。
search.cells.infocell.noresults.txt = 搜尋沒有傳回此連線的結果。
search.cells.infocell.nofilterresults.txt = 此伺服器連線上沒有報表符合目前的搜尋和篩選準則。
search.cells.infocell.servernotsupported.txt = 此伺服器連線不支援搜尋功能。
search.cells.infocell.portfolio.noresults.txt = 搜尋沒有傳回公事包的任何結果。
search.cells.infocell.portfolio.nofilterresults.txt = 沒有符合目前搜尋和篩選準則的報表。
search.filters.all.txt = 全部
search.filters.lastday.txt = 最近 24 個小時
search.filters.lastweek.txt = 最近 1 個星期
search.filters.lastmonth.txt = 最近 1 個月
search.filters.portfolio.txt = 我的報表
search.filters.unselectedHint.txt = 切換選取項目。
search.filters.selectedHint.txt = 切換選取項目。
search.filters.selected.txt = 已選取
search.filters.narrowby.locations = 位置
search.filters.narrowby.authors = 作者
search.filters.narrowby.date = 日期
search.filters.narrowby.delimiter = ,
search.filters.title.location.txt = 位置
search.filters.title.location.uppercase.txt = 位置
search.filters.title.author.txt = 作者
search.filters.title.author.uppercase.txt = 作者
search.filters.title.modifieddate.txt = 更新日期
search.filters.title.modifieddate.uppercase.txt = 更新日期
addconnectioncontroller.button.next.txt = 下一步
addconnectioncontroller.error.fallback.txt = 嘗試設定連線時發生未預期的服務錯誤。
addconnectioncontroller.successfulconnectionadded.txt = 成功增加連線。
addconnectioncontroller.whitelist.messagedialog.title.txt = 如果您知道系統管理員的電子郵件地址，則可以傳送電子郵件要求存取此伺服器。
addconnectioncontroller.whitelist.messagedialog.button.positive.txt = 傳送電子郵件
addconnectioncontroller.whitelist.messagedialog.button.negative.txt = 取消
addconnectioncontroller.allowlist.messagedialog.title.txt = 如果您知道系統管理員的電子郵件地址，則可以傳送電子郵件要求存取此伺服器。
addconnectioncontroller.allowlist.messagedialog.button.positive.txt = 傳送電子郵件
addconnectioncontroller.allowlist.messagedialog.button.negative.txt = 取消
connectiondetailscontroller.editconnectiondescriptionmessage.success.txt = 成功更新連線。
portfoliocontroller.title.txt = 公事包
portfoliocontroller.subscribed.title.txt = 我的報表
portfoliocontroller.history.title.txt = 最近使用的報表
portfoliocontroller.favorites.title.txt = 我的最愛
portfoliocontroller.sharedbyme.title.txt = 由我共用
portfoliocontroller.sharedwithme.title.txt = 與我共用
expandedcontroller.title.subscribed.txt = 我的報表
expandedcontroller.title.history.txt = 最近使用的報表
expandedcontroller.title.favorites.txt = 我的最愛報表
expandedcontroller.title.sharedbyme.txt = 由我共用的報表
expandedcontroller.title.sharedwithme.txt = 與我共用的報告
expandedcontroller.sortby.txt = 排序依據:
expandedcontroller.sortorder.name.title.txt = 名稱
expandedcontroller.sortorder.server.title.txt = 連線
expandedcontroller.sortorder.subscriptiondate.title.txt = 加入日期
expandedcontroller.sortorder.lastupdateddate.title.txt = 上次更新日期
expandedcontroller.sortorder.mostrecentlyviewed.title.txt = 最近檢視的
expandedcontroller.sortorder.default.title.txt = 相關
expandedcontroller.sortorder.historyrelevance.title.txt = 最近檢視的
expandedcontroller.sortorder.frequentlyviewed.title.txt = 最常檢視
expandedcontroller.sortorder.name.description.txt = 報表排序，先依名稱，然後再依更新日期。
expandedcontroller.sortorder.server.description.txt = 報表排序，先依關聯的連線，再依名稱，最後依更新的日期。
expandedcontroller.sortorder.subscriptiondate.description.txt = 報表排序，先依加入日期，然後再依名稱。
expandedcontroller.sortorder.lastupdateddate.description.txt = 報表排序，先依上次成功更新的日期，然後再依名稱。
expandedcontroller.sortorder.mostrecentlyviewed.description.txt = 報表排序，先依此裝置上次存取的日期，然後再依名稱。
expandedcontroller.sortorder.default.description.txt = 報表排序，依連線所確定的搜尋關聯。
expandedcontroller.sortorder.historyrelevance.description.txt = 報表排序，依所有裝置的最近檢視日期。
expandedcontroller.sortorder.frequentlyviewed.description.txt = 報表排序，依報表的檢視次數，然後再依名稱。
reportsubscription.author.title.txt = 作者
reportsubscription.createdon.title.txt = 建立時間
reportsubscription.updatedon.title.txt = 修改時間
reportsubscription.location.title.txt = 位置
reportsubscription.description.title.txt = 描述
reportsubscription.description.contents.notavailable.txt = (沒有提供)
reportsubscription.reportunavailable.title.txt = 無法使用報表
reportsubscription.reportunavailable.contents.txt = 目前無法在該伺服器上使用此報表。
reportsubscription.reportunavailable.button.title.txt = 移除
reportsubscription.subscribereport.button.subscribe.txt = 增加
reportsubscription.subscribereport.button.subscribing.txt = 加入中
reportsubscription.subscribereport.button.open.txt = 開啟
settingscontroller.title.txt = 設定
settingscontroller.connectionsection.title.txt = 連線
settingscontroller.addconnectionbutton.title.txt = 增加連線
connectiondetailscontroller.connectiondetailssection.title.txt = 連線
connectiondetailscontroller.connectiondetailssection.server.title.txt = 伺服器
connectiondetailscontroller.connectiondetailssection.port.title.txt = 連接埠
connectiondetailscontroller.connectiondetailssection.secureconnection.title.txt = 安全連線
connectiondetailscontroller.authenticationdetailssection.title.txt = 驗證
connectiondetailscontroller.authenticationdetailssection.guest.logonasguest.title.txt = 使用訪客身分登入
connectiondetailscontroller.authenticationdetailssection.guest.loggedon.userid.title.txt = 使用者 ID
connectiondetailscontroller.authenticationdetailssection.guest.loggedon.password.title.txt = 密碼
connectiondetailscontroller.miscellaneousdetailssection.title.txt = 雜項
connectiondetailscontroller.miscellaneousdetailssection.description.title.txt = 描述
connectiondetailscontroller.miscellaneousdetailssection.descriptioncontents.placeholder.txt = 範例文字
connectiondetailscontroller.miscellaneousdetailssection.descriptioncontents.guest.user.txt = 訪客
connectiondetailscontroller.clearhistory.button.title.txt = 清除連線之最近使用的報表
connectiondetailscontroller.clearhistory.shortmessage.txt = 清除此連線在最近使用的報表檢視中顯示的內容。
connectiondetailscontroller.clearhistory.longmessage.txt = 清除最近檢視中顯示的報表。已從伺服器和行動裝置中清除最近使用的報表歷程記錄。
connectiondetailscontroller.removeconnection.button.title.txt = 移除連線
connectiondetailscontroller.removeconnectiondialog.title.txt = 移除連線
connectiondetailscontroller.removeconnectiondialog.message.txt = 移除此連線將移除從此伺服器下載的所有文件。
connectiondetailscontroller.removeconnectiondialog.cancelbutton.txt = 取消
connectiondetailscontroller.removeconnectiondialog.removebutton.txt = 移除
librarycontroller.node.folder.contents.nocontents.txt = 此資料夾沒有內容。
librarycontroller.node.root.title.txt = 所有的連線
librarycontroller.node.favorites.title.txt = 我的最愛
librarycontroller.node.history.title.txt = 最近使用的報表
librarycontroller.node.sharedbyme.title.txt = 由我共用
librarycontroller.node.sharedwithme.title.txt = 與我共用
whitelist.messagedialog.message.txt = "__HOST__" 要求裝置需先由管理員註冊才能存取內容。\n存取已停用。\n已將這部裝置上的報表移除。\n請連絡您的SAS管理員。
blacklist.messagedialog.message.txt = "__HOST__" 已撤銷您存取其內容的權限。\n所有與此伺服器關聯的報表已從此行動裝置移除。\n請連絡您的 SAS 管理員。
allowlist.messagedialog.message.txt = "__HOST__" 要求裝置需先由管理員註冊才能存取內容。\n已停用存取。\n報表已從此裝置移除。\n請連絡您的 SAS 管理員。
denylist.messagedialog.message.txt = "__HOST__" 已撤銷您存取其內容的權限。\n所有與此伺服器關聯的報表已從此行動裝置移除。\n請連絡您的 SAS 管理員。
basereportviewmodel.reportstatus.unsubscribed.txt = 已移除
basereportviewmodel.reportstatus.subscribing.txt = 加入中
basereportviewmodel.reportstatus.downloading.txt = 下載中
basereportviewmodel.reportstatus.unavailable.txt = 無法使用
basereportviewmodel.reportstatus.normal.txt = 標準
basereportviewmodel.reportstatus.new.txt = 新增
basereportviewmodel.reportstatus.updated.txt = 已更新
ok.txt = 確定
close.txt = 關閉
reportsortorderlist.title.txt = 排序依據:
collection.dategroup.today = 今天
collection.dategroup.yesterday = 昨天
collection.dategroup.thisweek = 本週
collection.dategroup.unavailable = 日期未定
user.name.not.found = 無法使用
user.name.sas = SAS
user.name.same.user = 本人
comment.no.subject = (無主旨)
folder.my.folder.label.txt = 我的資料夾
bird.error.image.imageNotFound.txt = 此報表物件的影像缺少或無效。
bird.error.data.serverDataFailure.txt = 伺服器資料失敗
bird.error.data.transport.dataLimitsExceeded.txt = 查詢產生的資料集合太大，伺服器應用程式無法處理。
bird.error.data.transport.dataSourceNotFound.txt = 伺服器上找不到要求的資料來源。
bird.error.data.transport.serverNotFound.txt = 找不到伺服器。
bird.error.data.transport.unauthorized.txt = 沒有授權您可以檢視此報表物件使用的資料。
bird.error.data.transport.queryError.txt = 伺服器不了解應用程式要求的資料。
bird.error.report.malformedReportElement.txt = App 無法顯示報表物件，因為物件有缺陷。
bird.error.graph.malformedResult.txt = 圖形物件參考無效的結果。
bird.error.data.allRolesNotAssigned.txt = 尚未將資料項目指派給必要角色。
bird.warning.models.storedProcessUnsupported.txt = 不再支援預存程式。
bird.error.data.transport.incompleteData.txt = 此報表物件使用的資料太大。只顯示資料的子集。
bird.error.data.transport.limitedInteraction.txt = 此報表物件使用的資料太大。互動功能已限制或停用。
bird.error.data.noResponseFromServer.txt = 沒有完成伺服器的資料要求。報表物件資料可能缺少或不完整。請確定可以使用行動網路、Wi-Fi 或其他網路連線。
bird.error.data.unrecognizedResponse.txt = 伺服器要求傳回的資料無法辨識或有缺陷。報表物件資料可能不完整或缺少。請連絡貴組織的 SAS Visual Analytics 管理員。
bird.error.data.notAvailable.txt = 資料無法使用。
bird.error.data.filterProducedEmptyData.txt = 沒有資料符合目前的篩選。
bird.error.data.transport.kpiLimitsExceeded.txt = 只出現部份資料，因為太多資料而無法顯示。篩選資料可以顯示不同的值。
bird.warning.data.transport.unsupportedRequest.txt = 此報表物件的部份互動功能可能受到限制或停用。
bird.error.data.contactAdministrator.txt = 請連絡貴組織的 SAS Visual Analytics 管理員。
bird.error.data.transport.dataNotAssigned.txt = 尚未指派資料。
bird.error.data.transport.formatWarning.txt = 無法辨識關聯的格式，資料聚合層級可能與顯示值不相符。
bird.error.data.transport.rankTiesTruncated.txt = 排名篩選中同分的數目超過限制。已省略部份。
bird.error.data.transport.maxPeriodCalculationsExceeded.txt = 過度期間計算傳回遺漏值，在時間上增加篩選可以降低期間計算的數目。
bird.error.data.transport.unresolvedPeriodCalculations.txt = 未解析的期間計算遇到此報表物件。
bird.error.data.transport.unresolvedCalculations.txt = 未解析的計算遇到此報表物件。
bird.error.data.transport.unknown.txt = 處理此報表物件的資料時發生無法辨識的問題。
bird.rules.graphMeasureRuleConflict.txt = 此報表使用的規則可能與基本色彩對應衝突。
bird.warning.interactionDisabled.txt = 已停用此報表物件中啟動的部份互動。
bird.warning.missingMapCoordinates.txt = 地圖中沒有顯示部份功能，因為缺少資料的位置資訊。
bird.warning.missingGeometries.txt = Geo 區域地圖沒有顯示部份區域，因為資料與已知的地理區域不符合。
bird.warning.noMatchesFound.txt = 提供的外部地理資料項目找不到相符的項目。
bird.error.data.transport.maxRankValuesExceeded.txt = 從百分比排名計算傳回太多值，資料可能不完整。
bird.error.data.transport.parameterOutOfRange.txt = 參數超出範圍，已到達條件約束允許的界限。
bird.error.parameter.valueTooSmall.fmt.txt = 參數「{0}」的參數值無效: 值 ({1}) 小於允許的最小值 ({2})。
bird.error.parameter.valueTooSmallOrEqual.fmt.txt = 參數「{0}」的參數值無效: 值 ({1}) 小於或等於允許的最小值 ({2})。
bird.error.parameter.valueTooLarge.fmt.txt = 參數「{0}」的參數值無效: 值 ({1}) 大於允許的最大值 ({2})。
bird.error.parameter.valueTooLargeOrEqual.fmt.txt = 參數「{0}」的參數值無效: 值 ({1}) 大於或等於允許的最大值 ({2})。
bird.error.parameter.invalidValue.fmt.txt = 參數「{0}」的參數值無效: {1}。
bird.error.kpi.invalidDisplayRules.txt = 尚未指派或建立必要顯示規則。
bird.error.data.maxRowsExceededDataTruncated.txt = 資料集超過允許的最大列數 ({0})。僅顯示前 {0} 列。
bird.error.data.maxRowsExceededNoData.txt = 資料集超過允許的最大列數 ({0})。不顯示資料。
bird.error.data.reportObjectIncomplete.txt = 報表物件不完整。
bird.warning.prompt.noMeasureVariable.txt = 提示使用量值，但提示定義中沒有定義 MeasureVariable。
bird.warning.prompt.missingDynamicValue.txt = 缺少動態預設值。
bird.warning.data.incorrectFormat.fmt.txt = 輸入的值不符合 {0} 格式。
bird.warning.elementNotSupported.fmt.txt = 無法顯示「{0}」。
bird.warning.report.stateIsMissingModelFile.txt = 儲存的狀態遺漏報表模型檔案。報表已使用預設的狀態載入。
bird.warning.autoChartChanges.fmt.txt=其中有部分物件已移除，因為新的圖表不支援: {0}。
bird.warning.removedIxn.txt=動作
bird.warning.removedActions.txt=連結
bird.warning.removedConditions.txt=顯示規則
bird.warning.removedDataItems.txt=資料項目
bird.warning.removedRanks.txt=排名
bird.warning.removedFilters.txt=篩選
bird.warning.removedParameters.txt=參數
bird.warning.allOtherRemovedOnRanks.txt=排名中的所有其他項目
bird.warning.invalid.user.input.txt=輸入無效
bird.warning.job.executionFailed.txt=工作執行失敗。
bird.warning.job.error.txt=工作執行傳回錯誤。
bird.warning.viewset.multipleReferences.txt=報表物件無法在多個內容環境中使用。
bird.warning.exportData.multipleResults.txt=此圖形有多個結果。您只能將其匯出為 Microsoft Excel 檔案。
bird.warning.pageVisibility.invalidSection.txt=您無法檢視連結的頁面。
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.MEAN.txt = 平均
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.STD.txt = 標準差
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.MIN.txt = 最低鬚值
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.MAX.txt = 最高鬚值
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.TRUE_MIN.txt = 最小值
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.TRUE_MAX.txt = 最大值
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.N.txt = 計數
bird.autotitle.exampleData.txt=範例資料
bird.autotitle.measure.txt=量值
bird.autotitle.category.txt=類別
bird.autotitle.frequency.txt=次數
bird.autotitle.source.txt=來源
bird.autotitle.response.txt=回應
bird.autotitle.documentCollection.txt=文件集
bird.autotitle.hierarchy.txt=階層
bird.autotitle.yAxis.txt=Y 座標軸
bird.autotitle.xAxis.txt=X 座標軸
bird.autotitle.bar.txt=(長條)
bird.autotitle.bar2.txt=(長條2)
bird.autotitle.target.txt=目標
bird.autotitle.color.txt=色彩
bird.autotitle.size.txt=大小
bird.autotitle.weight.txt=權數
bird.autotitle.measureBar.txt=量值 (長條)
bird.autotitle.geography.txt=地理
bird.autotitle.measureBar2.txt=量值 (長條 2)
bird.autotitle.measureLine.txt=量值 (折線)
bird.autotitle.measureLine2.txt=量值 (折線 2)
bird.autotitle.measureTimeSeries.txt=量值
bird.autotitle.measureTimeSeries2.txt=量值
bird.autotitle.timeAxis.txt=時間軸
bird.autotitle.buttonBar.txt=按鈕列
bird.autotitle.dropDownList.txt=下拉式清單
bird.autotitle.list.txt=清單
bird.autotitle.decisionTree.txt=決策樹
bird.autotitle.bayesNet.txt=貝氏網路
bird.autotitle.network.txt=網路
bird.autotitle.textTopics.txt=文字主題
bird.autotitle.glm.txt=廣義線性模型
bird.autotitle.linear.txt=線性迴歸
bird.autotitle.logistic.txt=羅吉斯迴歸
bird.autotitle.factMac.txt=因子分解機
bird.autotitle.explAuto.txt=自動解釋
bird.autotitle.predAuto.txt=自動預測
bird.autotitle.scenarioAnalysis.txt=自動預測
bird.autotitle.forest.txt=隨機森林
bird.autotitle.gradientBoosting.txt=梯度提升
bird.autotitle.neuralNetwork.txt=類神經網路
bird.autotitle.svm.txt=支援向量機
bird.autotitle.gam.txt=廣義加性模型
bird.autotitle.nplr.txt=無母數羅吉斯迴歸
bird.autotitle.slider.txt=滑桿
bird.autotitle.textInput.txt=文字輸入
bird.autotitle.measureDate.txt=量值/日期
bird.autotitle.axisItems.txt=座標軸項目
bird.autotitle.task.txt=任務
bird.autotitle.start.txt=開始
bird.autotitle.finish.txt=完成
bird.autotitle.template.one.fmt.txt={0}
bird.autotitle.sankey.linkColor.dropOff.txt=終止
bird.autotitle.sankey.linkColor.event.txt=事件
bird.autotitle.sankey.linkColor.path.txt=路徑
bird.autotitle.template.oneByTwo.fmt.txt={0} - {1}
bird.autotitle.template.oneByTwoGroupedByThree.fmt.txt={0} - {1} (群組依據: {2})
bird.autotitle.template.oneOfTwo.fmt.txt={0} / {1}
bird.autotitle.template.oneOfTwoGroupedByThree.fmt.txt={0} / {1} (群組依據: {2})
bird.autotitle.template.oneByTwoSizedByThree.fmt.txt={0} - {1} (大小依據: {2})
bird.autotitle.template.oneToTwo.fmt.txt={0} 對 {1}
bird.autotitle.template.oneCommaTwoByThree.fmt.txt={0}，{1} - {2}
bird.autotitle.template.oneByTwoToThree.fmt.txt={0} - {1} 對 {2}
bird.autotitle.template.oneOfTwoParenThree.fmt.txt={0} / {1} ({2})
bird.autotitle.template.oneFromTwoToThree.fmt.txt={0} (從{1}到{2})
bird.autotitle.template.correlationOfSelected.txt=選取量值的相關
bird.autotitle.template.scatterPlotOfSelected.txt=選取量值的散布圖
bird.autotitle.template.bubbleChangeOfSelected.txt=選取項目的氣泡變化
bird.autotitle.template.vectorOfSelected.txt=選取項目的向量圖
bird.autotitle.template.parallelCoordinatesOfSelected.txt=所選變數的平行座標
bird.autotitle.template.cluster.txt=群集
bird.autotitle.template.sankey.1.fmt.txt=路徑依據: {0}
bird.autotitle.template.sankey.fmt.txt=路徑 {0} (由 {1})
bird.autotitle.template.two.fmt.txt={1}
bird.autotitle.template.twoParenThree.fmt.txt={1} ({2})
bird.autotitle.template.relationships.fmt.txt={0} 與 {1} 之間的關係為何?
bird.autotitle.template.geo.coordinates.txt=地區的 Geo 地圖
bird.autotitle.template.geo.coordinates.fmt.txt={0} 的 Geo 地圖
bird.autotitle.template.geo.coordinates.size.txt=地區的 Geo 地圖 (大小依據: 大小)
bird.autotitle.template.geo.coordinates.size.fmt.txt={1} 的Geo 地圖 (大小依據: {0})
bird.autotitle.template.geo.coordinates.color.size.fmt.txt={0} - {2} (大小依據: {1})
bird.autotitle.template.geo.txt=依地理位置著色
bird.autotitle.template.geo.multioverlay.txt=所選取項目的 Geo 地圖
bird.autotitle.template.network.txt=地區的網路
bird.autotitle.template.network.fmt.txt={0} 的網路
bird.autotitle.assessment.lift.title=提升
bird.autotitle.assessment.ROC.title=ROC
bird.autotitle.assessment.misclassification.title=誤分類
bird.autotitle.assessment.confusionMatrix.title=混淆矩陣
bird.autotitle.assessment.cutoff.title=截止值圖
bird.autotitle.assessment.linear.title=評估
bird.autotitle.tree.title=樹
bird.autotitle.variableImportance.title=變數重要性
bird.autotitle.leafStatistics.title=分葉統計值
bird.autotitle.validationError.title=驗證誤差
bird.autotitle.errorPlot.title=誤差圖
bird.autotitle.partialDependence.title=部分相依
bird.autotitle.fitSummary.title=配適摘要
bird.autotitle.paramaterEstimate.title=參數估計
bird.autotitle.residualPlot.title=殘差圖
bird.autotitle.influencePlot.title=影響圖
bird.autotitle.variableSelectionPlot.title=變數選取圖
bird.autotitle.scoredResponse.title=評分回應
bird.autotitle.relativeImportancePlot.title=相對重要性圖
bird.autotitle.network.title=網路結構
bird.autotitle.iterationPlot.title=迭代圖
bird.autotitle.splinePlot.title=雲線圖
bird.autotitle.variablesInNetwork.title=網路中的變數
bird.autotitle.modelSelection.title=模型選取
bird.autotitle.topics.title=主題
bird.autotitle.terms.title=詞語
bird.autotitle.documents.title=文件
bird.autotitle.topRecommendations.title=置頂建議
bird.autotitle.bottomRecommendations.title=置底建議
bird.autotitle.fitStatistic.title=配適統計
bird.autotitle.modelComparison.txt=模型比較
bird.autotitle.oddsRatioPlot.title=勝算比圖
bird.autotitle.template.autoExplanation.subgroups.categorical.fmt.txt=基於 "{0}"，依據 "{1}" 為 "{2}" 的機率的群組為何?
bird.autotitle.template.autoExplanation.subgroups.measure.fmt.txt=基於 "{0}"，依據 "{1}" 平均值的群組為何?
bird.autotitle.template.autoExplanation.summary.fmt.txt="{0}" 的特徵為何？
bird.autotitle.template.autoExplanation.factors.fmt.txt=哪些因子與 "{0}" 最相關?
bird.autotitle.template.autoPrediction.labelText.fmt.txt="{0}" 的預測為何?
bird.autotitle.template.autoPrediction.factorsText.fmt.txt=應使用哪些最重要因子的值來進行預測?bird.data.role.ANIMATION_VAR.txt = 動畫
bird.data.role.AXIS_ITEMS_VAR.txt = 座標軸項目
bird.data.role.BAR_MEASURE1_VAR.txt = 量值 (長條 1)
bird.data.role.BAR_MEASURE2_VAR.txt = 量值 (長條 2)
bird.data.role.BAR_MEASURE_VAR.txt = 量值 (長條)
bird.data.role.BOLINGER_LOWER_VAR.txt = 布林下限
bird.data.role.BOLINGER_UPPER_VAR.txt = 布林上限
bird.data.role.CATEGORY_VAR.txt = 類別
bird.data.role.CLOSE_VAR.txt = 關閉
bird.data.role.COLOR_VAR.txt = 色彩
bird.data.role.COLUMN_VAR.txt = 欄
bird.data.role.COLUMNS_VAR.txt = 欄
bird.data.role.DATA_LABEL_VAR.txt = 資料標籤
bird.data.role.DATA_VALUE_VAR.txt = 資料值
bird.data.role.DOCUMENT_COUNT_VAR.txt = 文件數目
bird.data.role.DOTPLOT_CATEGORY_VAR.txt = 類別
bird.data.role.DOTPLOT_MEASURE_VAR.txt = 量值
bird.data.role.DYNVAR_1_VAR.txt = 動態 var 1
bird.data.role.DYNVAR_2_VAR.txt = 動態 var 2
bird.data.role.DYNVAR_3_VAR.txt = 動態 var 3
bird.data.role.EVENT_VAR.txt = 事件
bird.data.role.FINISH_VAR.txt = 完成
bird.data.role.GEO_VAR.txt = 地理位置
bird.data.role.GROUP_VAR.txt = 群組
bird.data.role.GROUPING_VAR.txt = 群組
bird.data.role.HIDDEN_VAR.txt = 隱藏
bird.data.role.HIERARCHY_LEVELS_VAR.txt = 層級
bird.data.role.HIGH_VAR.txt = 高
bird.data.role.HISTOGRAM_FREQUENCY_VAR.txt = 次數
bird.data.role.HISTOGRAM_MEASURE_VAR.txt = 量值
bird.data.role.HORIZONTAL_SERIES_VAR.txt = 網格欄
bird.data.role.ID_VAR.txt = ID
bird.data.role.KEY_FRAME_VAR.txt = 動畫
bird.data.role.KPI_GROUP_VAR.txt = 群組
bird.data.role.LABEL_VAR.txt = 標籤
bird.data.role.LINE_MEASURE1_VAR.txt = 量值 (折線 1)
bird.data.role.LINE_MEASURE2_VAR.txt = 量值 (折線 2)
bird.data.role.LINE_MEASURE_VAR.txt = 量值 (折線)
bird.data.role.LINKMAGNITUDE_VAR.txt = 連結絕對值
bird.data.role.LINKWEIGHT_VAR.txt = 連結
bird.data.role.LINK_COLOR_VAR.txt = 連結顏色
bird.data.role.LINK_WIDTH_VAR.txt = 連結寬度
bird.data.role.LOW_VAR.txt = 低
bird.data.role.MAGNITUDE_VAR.txt = 神經元絕對平均值
bird.data.role.MEASURE_VAR.txt = 量值
bird.data.role.MEASURES_VAR.txt = 量值
bird.data.role.MOVING_AVG_VAR.txt = 移動平均
bird.data.role.NEURON_VAR.txt = 神經元
bird.data.role.NODE_VAR.txt = 節點
bird.data.role.OTHER_VAR.txt = 其他
bird.data.role.PATTERN_VAR.txt = 模式
bird.data.role.RESPONSE1_VAR.txt = 量值 (折線 1)
bird.data.role.RESPONSE2_VAR.txt = 量值 (折線 2)
bird.data.role.RESPONSE_VAR.txt = 量值
bird.data.role.ROW_VAR.txt = 列
bird.data.role.ROWS_VAR.txt = 列
bird.data.role.SEQUENCE_VAR.txt = 序列順序
bird.data.role.SHARED_DYNVAR_0_VAR.txt = 共用 dynvar 0
bird.data.role.SIZE_VAR.txt = 大小
bird.data.role.SIZE_END_VAR.txt = 結束大小
bird.data.role.SIZE_START_VAR.txt = 開始大小
bird.data.role.SOURCE_VAR.txt = 來源
bird.data.role.START_VAR.txt = 開始
bird.data.role.SUBGROUP_VAR.txt = 群組
bird.data.role.TARGET_VAR.txt = 目標
bird.data.role.TASK_VAR.txt = 任務
bird.data.role.TERM_VAR.txt = 詞語
bird.data.role.TERM_TOPIC_WEIGHT_VAR.txt = 主題權數
bird.data.role.TILE_VAR.txt = 方塊
bird.data.role.TIME_VAR.txt = 時間軸
bird.data.role.TIME_MEASURE1_VAR.txt = 量值 (時間序列 1)
bird.data.role.TIME_MEASURE2_VAR.txt = 量值 (時間序列 2)
bird.data.role.TIP_VAR.txt = 資料提示值
bird.data.role.TOPIC_VAR.txt = 主題
bird.data.role.TRANSACTION_ID_VAR.txt = 異動識別碼
bird.data.role.VERTICAL_SERIES_VAR.txt = 網格列
bird.data.role.VOLUME_VAR.txt = 數量
bird.data.role.WEIGHT_VAR.txt = 權數
bird.data.role.WEIGHT_TITLE_VAR.txt = 權數
bird.data.role.WIDTH_VAR.txt = 寬度
bird.data.role.WORD_VAR.txt = 文字
bird.data.role.X_VAR.txt = X 座標軸
bird.data.role.X_END_VAR.txt = X 結束
bird.data.role.X_ORIGIN_VAR.txt = X 原點
bird.data.role.X_START_VAR.txt = X 開始
bird.data.role.Y_VAR.txt = Y 座標軸
bird.data.role.Y_END_VAR.txt = Y 結束
bird.data.role.Y_ORIGIN_VAR.txt = Y 原點
bird.data.role.Y_START_VAR.txt = Y 開始
bird.data.aggregations.sum.txt = 總和
bird.data.aggregations.average.txt = 平均
bird.data.aggregations.min.txt = 最小值
bird.data.aggregations.max.txt = 最大值
bird.data.aggregations.countDistinct.txt = 相異計數
bird.data.aggregations.totalCount.txt = 次數
bird.data.aggregations.totalCountPercent.txt = 總計的百分比
bird.data.aggregations.standardDeviation.txt = 標準差
bird.data.aggregations.standardErrorStatistic.txt = 標準誤
bird.data.aggregations.variance.txt= 變異數
bird.data.aggregations.mode.txt = 眾數
bird.data.aggregations.countMissing.txt = 遺漏數目
bird.data.aggregations.firstQuartile.txt = 第一個四分位值
bird.data.aggregations.median.txt = 中位數
bird.data.aggregations.thirdQuartile.txt = 第三個四分位值
bird.data.aggregations.skew.txt = 偏態
bird.data.aggregations.kurtosis.txt = 峰態
bird.data.aggregations.coefficientOfVariation.txt = 變異係數
bird.data.aggregations.uncorrectedSumOfSquares.txt = 未校正平方和
bird.data.aggregations.correctedSumOfSquares.txt = 校正平方和
bird.data.aggregations.tStatistic.txt = T 統計值 (平均 = 0)
bird.data.aggregations.pValue.txt = P 值 (T 統計值)
bird.visuals.accessibility.visual.hint.txt = 點兩下可以存取資料元素。
bird.visuals.accessibility.textObject.hint.txt = 點兩下可以存取文字元素。
bird.visuals.accessibility.selectObject.hint.txt  = 點兩下可以選取報表物件。
bird.visuals.accessibility.table.hint.txt = 點兩下可以存取表格元素。
bird.visuals.accessibility.webcontent.hint.txt  = 點兩下可以存取 Web 內容。
bird.visuals.accessibility.customAction.maximize.hint.txt = 最大化報表物件。
bird.visuals.accessibility.customAction.restore.hint.txt = 還原報表物件。
bird.visuals.accessibility.customAction.drillUp.hint.txt = 在資料階層中向上鑽取。
bird.visuals.accessibility.customAction.supplementalView.hint.txt = 存取補充詳細資料。
bird.visuals.accessibility.customAction.search.hint.txt = 開啟搜尋控制。
bird.visuals.accessibility.customAction.dragMode.hint.txt = 選取拖曳模式。
bird.visuals.accessibility.customAction.back.hint.txt = 向後瀏覽。
bird.visuals.accessibility.customAction.warning.hint.txt = 讀取報表物件警告。
bird.visuals.accessibility.customAction.accessTableElements.hint.txt = 存取表格元素。
bird.visuals.accessibility.customAction.exitData.hint.txt = 結束資料元素；返回報表物件。
bird.visuals.accessibility.customAction.exitTextElements.hint.txt = 結束文字元素；返回報表物件。
bird.visuals.accessibility.customAction.exitTableElements.hint.txt = 結束表格元素；返回報表物件。
bird.visuals.accessibility.customAction.exitRowHeaders.hint.txt = 結束列標題元素；返回報表物件。
bird.visuals.accessibility.customAction.exitColumnHeaders.hint.txt = 結束欄標題元素；返回報表物件。
bird.visuals.accessibility.customAction.terseLabels.hint.txt = 啟動資料元素的簡易詳細資料。
bird.visuals.accessibility.customAction.detailedLabels.hint.txt = 啟動資料元素的展開詳細資料。
bird.visuals.accessibility.customAction.table.terseLabels.hint.txt = 啟動表格元素的簡易詳細資料。
bird.visuals.accessibility.customAction.table.detailedLabels.hint.txt = 啟動表格元素的展開詳細資料。
bird.visuals.accessibility.customAction.noElements.txt = 沒有顯示資料元素；返回報表物件。
bird.visuals.accessibility.customAction.table.noElements.txt = 沒有顯示表格元素；返回報表物件。
bird.visuals.accessibility.customAction.clearThisSelection.hint.txt = 清除此選取項目。
bird.visuals.accessibility.dataElement.selected.txt = 已選取
bird.visuals.accessibility.customAction.clearAllSelections.hint.txt = 清除資料元素選取項目。
bird.visuals.accessibility.customAction.table.clearAllSelections.hint.txt = 清除列選取項目。
bird.visuals.accessibility.visual.hasSelections.txt = 包含選取項目。
bird.visuals.accessibility.customAction.activateRow.txt = 存取列標題元素。
bird.visuals.accessibility.customAction.activateColumn.txt = 存取欄標題元素。
bird.visuals.accessibility.checkbox.promptname.txt = 核取方塊篩選控制
bird.visuals.accessibility.combobox.promptname.txt = 清單篩選控制
bird.visuals.accessibility.horizontalDualslider.promptname.txt = 水平範圍滑桿篩選控制
bird.visuals.accessibility.verticalDualslider.promptname.txt = 垂直範圍滑桿篩選控制
bird.visuals.accessibility.horizontalSlider.promptname.txt = 水平單一滑桿篩選控制
bird.visuals.accessibility.verticalSlider.promptname.txt = 垂直單一滑桿篩選控制
bird.visuals.accessibility.horizontalButtonbar.promptname.txt = 水平按鈕篩選控制
bird.visuals.accessibility.verticalButtonbar.promptname.txt = 垂直按鈕篩選控制
bird.visuals.accessibility.radiobutton.promptname.txt = 選項按鈕篩選控制
bird.visuals.accessibility.textfield.promptname.txt = 文字欄位篩選控制
bird.visuals.accessibility.combobox.optionPaging.txt = {0} 個到 {1} 個 (共 {2} 個)
bird.visuals.accessibility.customAction.exitListElements.hint.txt = 點兩下可以結束選項；返回篩選控制。
bird.visuals.accessibility.radiobutton.selections.txt = {0} 個選取項目
bird.visuals.accessibility.radiobutton.oneSelection.txt = 1 個選取項目
bird.visuals.accessibility.customAction.exitTextField.hint.txt = 點兩下可以結束文字欄位；返回篩選控制。
bird.visuals.accessibility.customAction.exitRangeSliderElements.hint.txt = 點兩下可以結束滑桿元素；返回篩選控制。
bird.visuals.accessibility.rangeSlider.currentValues.txt = {0} 至 {1}
bird.visuals.accessibility.rangeSlider.lowerThumb.txt = 下限滑桿
bird.visuals.accessibility.rangeSlider.upperThumb.txt = 上限滑桿
bird.visuals.accessibility.rangeSlider.track.txt = 軌跡
bird.visuals.accessibility.combobox.currentIndex.txt = {0} / {1}
bird.visuals.accessibility.combobox.noSelection.txt = 沒有選取項目。
bird.visuals.accessibility.checkbox.noSelections.txt = 沒有選取項目。
bird.visuals.accessibility.textfield.noText.txt = 沒有輸入文字。
bird.prompts.missingValues.label.txt=(遺漏值)
bird.prompts.includeMissingValues.label.txt = 遺漏值
bird.filter.title.count.fmt.txt = {0} / {1}
bird.visuals.accessibility.checkbox.hint.txt = 點兩下可以存取選項。
bird.visuals.accessibility.combobox.hint.txt = 點兩下可以開啟快顯。
bird.visuals.accessibility.textfield.hint.txt = 點兩下可以存取文字欄位。
bird.visuals.accessibility.rangeslider.hint.txt = 點兩下可以存取滑桿元素。
bird.visuals.accessibility.checkboxOption.selected.hint.txt = 點兩下可以取消選取項目。
bird.visuals.accessibility.checkboxOption.unselected.hint.txt = 點兩下可以選取項目。
bird.visuals.accessibility.datagrid.verticalScrollPosition.txt = 第 {0} 列到第 {1} 列(共 {2} 列)
bird.visuals.accessibility.datagrid.horizontalScrollPosition.txt = 第 {0} 欄到第 {1} 欄 (共 {2} 欄)
bird.visuals.accessibility.table.nextRow.announcement.txt = 第 {0} 列
bird.visuals.accessibility.table.headerRow.announcement.txt = 標題
bird.visuals.accessibility.table.totalsRow.announcement.txt = 總計
bird.displayRules.heading.DisplayRules.txt = 顯示規則
bird.displayRules.heading.ReportLevel.txt = 報表
bird.displayRules.target.AnyCategory.txt = 任何類別
bird.displayRules.target.AnyMeasure.txt = 任何量值
bird.displayRules.Other.txt = 其他
bird.displayRules.cellPlacement.left.txt = 文字左側
bird.displayRules.cellPlacement.right.txt = 文字右側
bird.displayRules.cellPlacement.replace.txt = 取代文字
bird.displayRules.fontIndicatorSampleText.numeric.txt = 1,234.56
bird.displayRules.fontIndicatorSampleText.txt = abc
bird.displayRules.kpiPosition.leftOfText.fmt.txt = 文字左側，「{0}」為 x
bird.displayRules.kpiPosition.rightOfText.fmt.txt = 文字右側，「{0}」為 x
bird.displayRules.kpiPosition.replacesText.fmt.txt = 取代文字，使用「{0}」作為 x
bird.displayRules.kpiPosition.default.fmt.txt = 使用「{0}」作為 x
bird.displayRules.untitled.txt = 未命名
bird.displayRules.range.fmt.txt = {LOW}  {LOWRELATION}  x  {HIGHRELATION}  {HIGH}
bird.informationPanel.incomingFilters.txt = 傳入篩選
bird.informationPanel.legend.txt = 圖例
bird.informationPanel.missingDescription.txt = (沒有提供)
bird.informationPanel.descriptionTitle.txt = 描述
bird.informationPanel.ranks.txt = 排名
bird.informationPanel.warnings.txt = 警告
bird.informationPanel.comments.txt = 註解
bird.informationPanel.alerts.txt = 警示
bird.informationPanel.name.txt = 名稱
bird.informationPanel.createdBy.txt = 建立者
bird.informationPanel.modifiedBy.txt = 修改者
bird.informationPanel.interactiveFilters.txt = 互動式篩選
bird.informationPanel.dataSourceFilters.txt = 資料來源篩選
bird.informationPanel.title.txt = 標題
bird.data.ranks.template.relational = ${Subset} ${Rows}${Percent} ${Of} ${AllVisibleCategories} ${TiesAndMissing}，${By}：${Frequency}
bird.data.ranks.template.detail = ${Subset} ${Rows}${Percent} ${Of} ${DetailRank} ${TiesAndMissing}，${By}：${Frequency}
bird.data.ranks.subset.top.txt = 前
bird.data.ranks.subset.bottom.txt = 後
bird.data.ranks.subset.all.txt = 所有
bird.data.ranks.percent.txt = %
bird.data.ranks.of.txt = 的
bird.data.ranks.allVisibleCategories.txt = 所有的可見類別
bird.data.ranks.includeTies.txt = (包含同分)
bird.data.ranks.includeMissing.txt = (包含遺漏值)
bird.data.ranks.includeTiesAndMissing.txt = (包含同分和遺漏值)
bird.data.ranks.by.txt = 依據
bird.data.ranks.frequency.txt = 次數
bird.data.ranks.bottomCount.txt = 最低計數
bird.data.ranks.bottomPercent.txt = 最低百分比
bird.data.ranks.topCount.txt = 最高計數
bird.data.ranks.topPercent.txt = 最高百分比
bird.data.ranks.groupBy.allVisibleCategories.txt = 所有的可見類別
bird.data.ranks.groupBy.detailRank.txt = 詳細排名
bird.sparkKPI.value.txt = 值
bird.rowNumber.label.txt = 列
bird.data.dynamicSpan.metadataSource.interactiveFilters.noFilter.txt = <沒有互動式篩選存在>
bird.data.dynamicSpan.metadataSource.tableModified.noValue.txt = <沒有值>
bird.data.dynamicSpan.promptAndVariable.noValue.txt = <沒有選取的項目>
bird.types.imageElement.txt = 影像
bird.types.promptElement.txt = 提示
bird.types.storedProcessElement.txt = 預存程式
bird.types.tableElement.txt = 清單表格
bird.types.textElement.txt = 文字
bird.types.jobContentElement.txt = 工作內容
bird.types.webContentElement.txt = Web 內容
bird.types.crosstabElement.txt = 交叉資料表
bird.types.visualContainerElement.txt = 可視容器
bird.types.kpiElement.txt = KPI 圖
bird.types.graphElement.txt = 圖形
bird.types.buttonBar.txt = 按鈕列
bird.types.dropDownList.txt = 下拉式清單
bird.types.list.txt = 清單
bird.types.textInput.txt = 文字輸入
bird.types.barChart.txt = 長條圖
bird.types.boxPlot.txt = 盒鬚圖
bird.types.bubbleChangePlot.txt = 氣泡變化圖
bird.types.bubblePlot.txt = 氣泡圖
bird.types.butterflyChart.txt = 蝶型圖
bird.types.compTimeSeries.txt = 比較時間序列圖
bird.types.correlationMatrix.txt = 相關矩陣
bird.types.decisionTree.txt = 決策樹
bird.types.dotPlot.txt = 點圖
bird.types.barBarChart.txt = 雙座標軸長條圖
bird.types.barLineChart.txt = 雙座標軸長條折線圖
bird.types.lineLineChart.txt = 雙座標軸折線圖
bird.types.dualAxisTimeSeries.txt = 雙座標軸時間序列圖
bird.types.gauge.txt = 測量儀器
bird.types.geoBubble.txt = Geo 氣泡
bird.types.geoCluster.txt = Geo 群集
bird.types.geoContour.txt = Geo 等高線
bird.types.geoLine.txt = Geo 折線
bird.types.geoNetwork.txt = Geo 網路
bird.types.geoPie.txt = Geo 圓形圖
bird.types.geoRegion.txt = Geo 區域
bird.types.geoScatter.txt = Geo 散布圖
bird.types.heatMap.txt = 熱圖
bird.types.histogram.txt = 直方圖
bird.types.keyValue.txt = 關鍵值
bird.types.lineChart.txt = 折線圖
bird.types.needlePlot.txt = 針狀圖
bird.types.numericSeries.txt = 數值序列圖
bird.types.parallelCoordinates.txt = 平行座標圖
bird.types.pieChart.txt = 圓形圖
bird.types.scatterPlot.txt = 散布圖
bird.types.scheduleChart.txt = 排程圖
bird.types.stepPlot.txt = 步階圖
bird.types.targetedBarChart.txt = 目標長條圖
bird.types.timeSeries.txt = 時間序列圖
bird.types.treemap.txt = 樹狀圖
bird.types.vectorPlot.txt = 向量圖
bird.types.waterfallChart.txt = 瀑布圖
bird.types.wordCloud.txt = 文字雲
bird.label.bar.txt = 長條
bird.label.barBar.txt = 雙座標軸長條圖
bird.label.barLine.txt = 雙座標軸長條折線圖
bird.label.bubble.txt = 氣泡
bird.label.bubbleChange.txt = 氣泡變化圖
bird.label.butterfly.txt = 蝶型圖
bird.label.compTimeSeries.txt = 比較時間序列圖
bird.label.crosstab.txt = 交叉資料表
bird.label.dot.txt = 圓點
bird.label.dualAxisTimeSeries.txt = 雙座標軸時間序列圖
bird.label.gauge.txt = 測量儀器
bird.label.histogram.txt = 直方圖
bird.label.keyValue.txt = 關鍵值
bird.label.line.txt = 線條
bird.label.lineLine.txt = 雙座標軸折線圖
bird.label.list.txt = 清單表格
bird.label.needle.txt = 針
bird.label.numericSeries.txt = 數值序列圖
bird.label.pie.txt = 圓形
bird.label.scatter.txt = 散布
bird.label.step.txt = 步階
bird.label.targetedBar.txt = 目標長條圖
bird.label.timeSeries.txt = 時間
bird.label.treemap.txt = 樹狀圖
bird.label.vector.txt = 向量
bird.label.waterfall.txt = 瀑布圖
bird.label.wordCloud.txt = 文字雲
bird.label.page.txt = 頁面
bird.label.report.txt = 報表
bird.label.region.txt = 區域
bird.data.format.COMMA.txt=逗點
bird.data.format.DOLLAR.txt=美元
bird.data.format.EURO.txt=歐元
bird.data.format.F.txt=浮點
bird.data.format.BEST.txt=數值
bird.data.format.PERCENT.txt=百分比
bird.data.format.POUND.txt=英鎊
bird.data.format.WON.txt=韓元
bird.data.format.YEN.txt=日圓
bird.data.format.AED.txt=阿拉伯聯合大公國
bird.data.format.AUD.txt=澳洲
bird.data.format.BGN.txt=保加利亞
bird.data.format.BRL.txt=巴西
bird.data.format.CAD.txt=加拿大
bird.data.format.CHF.txt=列支敦士登和瑞士
bird.data.format.CNY.txt=中國
bird.data.format.CZK.txt=捷克共和國
bird.data.format.DKK.txt=丹麥、法羅群島和格陵蘭
bird.data.format.EEK.txt=愛沙尼亞
bird.data.format.EGP.txt=埃及
bird.data.format.EUR.txt=歐盟
bird.data.format.GBP.txt=英國
bird.data.format.HKD.txt=香港特別行政區
bird.data.format.HRK.txt=克羅埃西亞
bird.data.format.HUF.txt=匈牙利
bird.data.format.IDR.txt=印尼
bird.data.format.ILS.txt=以色列
bird.data.format.INR.txt=印度
bird.data.format.JPY.txt=日本
bird.data.format.KRW.txt=南韓
bird.data.format.LTL.txt=立陶宛
bird.data.format.LVL.txt=拉脫維亞
bird.data.format.MOP.txt=澳門
bird.data.format.MXN.txt=墨西哥
bird.data.format.MYR.txt=馬來西亞
bird.data.format.NOK.txt=挪威
bird.data.format.NZD.txt=紐西蘭
bird.data.format.PLN.txt=波蘭
bird.data.format.RUB.txt=俄羅斯
bird.data.format.SEK.txt=瑞典
bird.data.format.SGD.txt=新加坡
bird.data.format.THB.txt=泰國
bird.data.format.TRY.txt=土耳其
bird.data.format.TWD.txt=台灣
bird.data.format.USD.txt=美國和波多黎各
bird.data.format.ZAR.txt=南非
bird.data.format.DATEN.txt=日期
bird.data.format.DATE.txt=日期包含月份名稱
bird.data.format.DAY.txt=月中的日期
bird.data.format.DOWNAME.txt=星期中的日期
bird.data.format.JULDAY.txt=年中的日期
bird.data.format.WEEKDATE.txt=日、日期
bird.data.format.DDMMYY.txt=DDMMYYYY
bird.data.format.JULIAN.txt=儒略曆
bird.data.format.MMDDYY.txt=MMDDYYYY
bird.data.format.MONYY.txt=MMMYYYY
bird.data.format.MMYY.txt=MMYYYY
bird.data.format.MONTH.txt=月
bird.data.format.MONNAME.txt=月
bird.data.format.WORDDATE.txt=月、日、年
bird.data.format.YEAR.txt=年
bird.data.format.YYQC.txt=季、年
bird.data.format.YYMM.txt=YYYYMM
bird.data.format.YYMMDD.txt=YYYYMMDD
bird.data.format.TIME.txt=經過時間
bird.data.format.HOUR.txt=小時
bird.data.format.HHMM.txt=小時、分鐘
bird.data.format.MMSS.txt=分鐘、秒
bird.data.format.DTDATE.txt=日期
bird.data.format.DATETIME.txt=日期、時間
bird.data.format.DTWKDATX.txt=日、日期
bird.data.format.DTMONYY.txt=MMMYYYY
bird.data.format.TIMEAMPM.txt=時間
bird.data.format.QTR.txt=季
bird.data.format.WEEKV.txt=週
bird.data.format.WEEKVYW.txt=年、週
bird.data.format.WEEKVYWD.txt=年、週、日
bird.data.format.DTYEAR.txt=年
bird.data.format.DTYYQC.txt=季、年
bird.data.format.CHARACTER.txt=$
bird.data.format.DURATION.txt=持續期間
bird.data.format.CURRENCY.txt=貨幣
bird.breadcrumb.all.txt = 所有
com.sas.graphics.gtl.impl.util.TickValueUtil.TRILLIONS.txt=兆
com.sas.graphics.gtl.impl.util.TickValueUtil.BILLIONS.txt=十億
com.sas.graphics.gtl.impl.util.TickValueUtil.MILLIONS.txt=百萬
com.sas.graphics.gtl.impl.util.TickValueUtil.THOUSANDS.txt=千
com.sas.graphics.gtl.impl.util.TickValueUtil.TRILLIONTHS.txt=兆分之一
com.sas.graphics.gtl.impl.util.TickValueUtil.BILLIONTHS.txt=十億分之一
com.sas.graphics.gtl.impl.util.TickValueUtil.MILLIONTHS.txt=百萬分之一
com.sas.graphics.gtl.impl.util.TickValueUtil.THOUSANDTHS.txt=千分之一
com.sas.graphics.gtl.impl.data.Variable.PERCENT_LABEL.txt=百分比
com.sas.graphics.gtl.impl.data.Variable.FREQUENCY_LABEL.txt=次數
com.sas.graphics.gtl.impl.legend.SizeLegendRenderer.POSITIVE.txt = 正數
com.sas.graphics.gtl.impl.legend.SizeLegendRenderer.NEGATIVE.txt = 負數
com.sas.graphics.gtl.impl.legend.LayoutGlobalLegendRenderer.LEGEND_DROPPED.txt = 因為可用空間有限而未顯示圖例。
com.sas.graphics.gtl.impl.legend.LayoutGlobalLegendController.LEGEND_TRUNCATED.txt = 未顯示整個圖例。
com.sas.graphics.gtl.impl.legend.LayoutGlobalLegendController.LEGEND_COLLAPSED.fmt.txt = 已摺疊 {0} 的圖例。
com.sas.graphics.gtl.impl.legend.LayoutGlobalLegendController.LEGEND_EXPANDED.fmt.txt = 已展開 {0} 的圖例。
com.sas.graphics.gtl.impl.legend.LayoutGlobalLegendController.LEGEND_COLLAPSED.txt = 已摺疊圖例。
com.sas.graphics.gtl.impl.legend.LayoutGlobalLegendController.LEGEND_EXPANDED.txt = 已展開圖例。
com.sas.graphics.gtl.impl.legend.LayoutGlobalLegendController.LEGEND_ITEMS.fmt.txt = 圖例中有 {0} 個項目。
com.sas.graphics.gtl.missingValueWarning.txt= 此圖形包含遺漏值或無效值，所以無法正常顯示。
com.sas.graphics.gtl.duplicateKeyFrameWarning.txt=此圖形的資料對於動畫無效。資料無法包含任何重複的類別和日期組合。
com.sas.graphics.gtl.scatterPlotMatrix.scatterPlotMatrix.txt=散布圖矩陣
com.sas.graphics.gtl.impl.DataAnimationRenderer.SLOW.txt = 慢
com.sas.graphics.gtl.impl.DataAnimationRenderer.FAST.txt = 快
com.sas.graphics.gtl.impl.DataAnimationRenderer.NORMAL.txt = 標準
com.sas.graphics.gtl.impl.DataAnimationRenderer.LOOP.txt = 迴圈
com.sas.graphics.gtl.impl.DataAnimationRenderer.SPEED.txt = 速度
com.sas.graphics.gtl.impl.DataAnimationRenderer.FORWARD.txt = 前進
com.sas.graphics.gtl.impl.DataAnimationRenderer.BACK.txt = 後退
com.sas.graphics.gtl.impl.DataAnimationRenderer.PLAY.txt = 播放
com.sas.graphics.gtl.impl.DataAnimationRenderer.PAUSE.txt = 暫停
com.sas.graphics.gtl.impl.DataAnimationRenderer.MENU.txt = 功能表
com.sas.graphics.gtl.impl.Accessiblity.GraphFocus.txt = 圖形
com.sas.graphics.gtl.CELLS_ARE_TOO_SMALL.txt=太多網格列或欄。
com.sas.graphics.gtl.impl.renderer.CELL_HEADER_LABEL_EQUALS_VALUE.fmt.txt = {0} = {1}
com.sas.graphics.gtl.impl.OverviewAxisRenderer.LOWER_LIMIT.fmt.txt = 概觀座標軸: 詳細範圍下限左右縮圖，值: {0}，若要增加或減少，請使用方向鍵。
com.sas.graphics.gtl.impl.OverviewAxisRenderer.UPPER_LIMIT.fmt.txt = 概觀座標軸: 詳細範圍上限左右縮圖，值: {0}，若要增加或減少，請使用方向鍵。
com.sas.graphics.gtl.impl.OverviewAxisRenderer.DETAIL_RANGE.fmt.txt = 概觀座標軸: 詳細範圍，值: {0} 至 {1}，若要移動詳細範圍，請使用箭頭鍵。
com.sas.graphics.gtl.RANGE_TO.txt= {0} 至 {1}
com.sas.graphics.gtl.impl.LineParmRenderer.CONSTANTSLOPEDISPLAYNAME.txt = 斜率
com.sas.graphics.gtl.impl.PickResultSubtitle.msg.txt = {0} ({1})
com.sas.graphics.gtl.layoutRegion.iciclePlot.txt=冰柱圖
com.sas.graphics.gtl.layoutRegion.pieChart.PieOtherSliceOptions.LABEL.txt=其他
com.sas.graphics.gtl.layoutRegion.piechart.Warning.txt= 圓形圖包含一些無法顯示的負值或遺漏值。
com.sas.graphics.gtl.layoutRegion.piechart.allZeroOrNegativeWarning.txt= 圓形圖包含包含全零值或全負值，所以無法顯示。
com.sas.graphics.gtl.layoutRegion.piechart.smallMultipleSomeNegativeOrMissingWarning.txt= 某些圓形圖包含一些無法顯示的負值或遺漏值。
com.sas.graphics.gtl.layoutRegion.piechart.smallMultipleAllZeroOrNegativeWarning.txt= 某些圓形圖包含全零值或全負值，所以無法顯示。
com.sas.graphics.gtl.layoutRegion.piechart.Warn.DUPLICATE_CLASSIFICATION_VALUES.txt= 圓形圖遇到重複的分類資料值，所以無法顯示。
com.sas.graphics.gtl.layoutRegion.insetPiechart.Warn.DUPLICATE_CLASSIFICATION_VALUES.txt= 部分圓形圖遇到重複的分類資料值，所以無法顯示。
com.sas.graphics.gtl.layoutRegion.treeMap.Warning.txt=此樹狀圖包含無法顯示的 0 或負值。已將它們轉換為次數值。
com.sas.graphics.gtl.layoutRegion.treeMap.AllMissingWarning.txt=此樹狀圖包含無法顯示的遺漏值。已將它們轉換為次數值。
com.sas.graphics.gtl.layoutRegion.treeMap.Warn.DUPLICATE_CLASSIFICATION_VALUES.txt=樹狀圖遇到重複的分類資料值，所以無法顯示。
com.sas.graphics.gtl.layoutRegion.treeMap.Warn.MISSING_SIZE_VALUES.txt=樹狀圖包含無法正常顯示的遺漏大小值。
com.sas.graphics.gtl.layoutRegion.wordCloud.termWarning.txt= 沒有顯示所有的項目。
com.sas.graphics.gtl.layoutRegion.wordCloud.missingValueWarning.txt= 文字雲包含無法正常顯示的遺漏值或無效值。
com.sas.graphics.gtl.layoutRegion.gauge.valueoutofbound.txt= 測量儀器包含超出界限的值。
com.sas.graphics.gtl.layoutRegion.gauge.targetoutofbound.txt= 測量儀器包含超出界限的目標，該目標未顯示。
com.sas.graphics.gtl.layoutRegion.nld.missingValueWarning.txt= 此圖含有無法正常顯示的遺漏值或無效值。
com.sas.graphics.gtl.layoutRegion.keyValue.txt=關鍵值
com.sas.graphics.gtl.layoutRegion.keyValue.duplicateValue.txt=關鍵值遇到重複的類別值，無法顯示。
com.sas.graphics.gtl.layoutRegion.gauge.duplicateValue.txt=測量儀器遇到重複的類別值，無法顯示。
com.sas.graphics.gtl.layoutRegion.mosaicPlot.duplicateValue.txt=馬賽克圖遇到重複的類別值，無法顯示。
com.sas.graphics.gtl.layoutRegion.mosaicPlot.allZeroOrNegativeWarning.txt= 馬賽克圖包含全零值或全負值，因此無法顯示。
// KeyValue labels shown on the component
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.SUM.txt=總和
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.MEAN.txt=平均值
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.FREQ.txt=頻率
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.PCT.txt=百分比
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.FIRST.txt=第一個
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.MIN.txt=最小值
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.MAX.txt=最大值
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.MEDIAN.txt=中間值
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.FREQUENCY_WITH_MISSING.txt=頻率 (含遺漏值)
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.COUNT_DISTINCT.txt=相異
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.STANDARD_DEVIATION.txt=SD
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.STANDARD_ERROR.txt=SE
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.VARIANCE.txt=變異數
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.MODE.txt=眾數
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.COUNT_MISSING.txt=遺漏
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.FIRST_QUARTILE.txt=Q1
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.THIRD_QUARTILE.txt=Q3
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.SKEW.txt=偏態
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.KURTOSIS.txt=峰態
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.COEFFICIENT_OF_VARIATION.txt=CV
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.UNCORRECTED_SUM_OF_SQUARES.txt=USS
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.CORRECTED_SUM_OF_SQUARES.txt=CSS
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.T_STATISTIC.txt=t
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.P_VALUE.txt=p
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.UNKNOWN.txt=無法辨識
// KeyValue tooltip will contain longer value for statistic
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.SUM.txt=總和
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.MEAN.txt=平均值
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.FREQ.txt=次數
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.PCT.txt=百分比
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.FIRST.txt=第一個
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.MIN.txt=最小值
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.MAX.txt=最大值
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.MEDIAN.txt=中位數
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.FREQUENCY_WITH_MISSING.txt=次數和遺漏值
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.COUNT_DISTINCT.txt=相異計數
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.STANDARD_DEVIATION.txt=標準差
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.STANDARD_ERROR.txt=標準誤
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.VARIANCE.txt=變異數
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.MODE.txt=眾數
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.COUNT_MISSING.txt=遺漏計數
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.FIRST_QUARTILE.txt=第一個四分位值
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.THIRD_QUARTILE.txt=第三個四分位值
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.SKEW.txt=偏態
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.KURTOSIS.txt=峰態
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.COEFFICIENT_OF_VARIATION.txt=變異係數
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.UNCORRECTED_SUM_OF_SQUARES.txt=未校正平方和
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.CORRECTED_SUM_OF_SQUARES.txt=校正平方和
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.T_STATISTIC.txt=T 統計值
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.P_VALUE.txt=P 值
com.sas.graphics.gtl.layoutRegion.keyValue.tooltip.KeyValueStatisticLabel.UNKNOWN.txt=無法辨識統計值
com.sas.graphics.gtl.layoutRegion.keyValue.KeyValueStatisticLabel.STATTIPLABEL.txt=統計值
com.sas.graphics.gtl.layoutRegion.keyValue.NoTextFits.txt=無法顯示文字。未設定有效角色或者容器過小。
com.sas.graphics.gtl.layoutRegion.kpiChart.txt=KPI 圖
com.sas.graphics.gtl.layoutRegion.parallelCoordinatesPlot.txt=平行座標圖
com.sas.graphics.gtl.layoutRegion.pcp.INVALID_BIN_METADATA.txt = 無效的分箱中繼資料規格。
com.sas.graphics.gtl.layoutRegion.pcp.INVALID_BIN_OPTIONS.txt = 指定的分箱選項無效。
com.sas.graphics.gtl.layoutRegion.pcp.LOWER_LIMIT.fmt.txt = 平行座標圖: 座標軸: {0}、詳細資料軸下限 (上下翻動)，值: {1}。若要增加或減少，請使用方向鍵。
com.sas.graphics.gtl.layoutRegion.pcp.UPPER_LIMIT.fmt.txt = 平行座標圖: 座標軸: {0}、詳細資料軸上限 (上下翻動)，值: {1}。若要增加或減少，請使用方向鍵。
com.sas.graphics.gtl.layoutRegion.pcp.DETAIL_RANGE.fmt.txt = 平行座標圖: 座標軸: {0}、詳細資料軸，值: {1}。若要增加或減少，請使用方向鍵。
com.sas.graphics.gtl.layoutRegion.pcp.LEFT_AXIS.fmt.txt = 平行座標圖: 左界限軸: {0}，若要變更座標軸或選取座標軸元素，請使用方向鍵。
com.sas.graphics.gtl.layoutRegion.pcp.RIGHT_AXIS.fmt.txt = 平行座標圖: 右界限軸: {0}，若要變更座標軸或選取座標軸元素，請使用方向鍵。
com.sas.graphics.gtl.layoutRegion.pcp.DETAIL_AXIS.fmt.txt = 平行座標圖: 座標軸: {0}。若要變更座標軸或選取座標軸元素，請使用方向鍵。
com.sas.graphics.gtl.layoutRegion.pieChart.txt=圓形圖
com.sas.graphics.gtl.layoutRegion.treeMap.txt=樹狀圖
com.sas.graphics.gtl.layoutRegion.wordCloud.txt=文字雲
com.sas.graphics.gtl.layoutRegion.mosaicPlot.txt=馬賽克圖
com.sas.graphics.gtl.dataSkin.NotSupportedWithFillType.fmt.txt=使用 FILLTYPE={1} 選項時不支援 DATASKIN={0}。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.INVALIDTIMEAXIS.txt=時間軸不支援來自標繪資料的格式。軸類型將變更為 LINEAR。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.INVALIDLOGAXIS.txt=對數座標軸不支援繪圖資料的座標軸是零或負值，或是由於預設值或指派值為 BASELINEINTERCEPT。座標軸類型將變更為線性。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.INVALIDLOGVIEWPORT.fmt.txt=對數座標軸不支援 {0} ({1}) 的值是零或負數。將使用 {0} 選項的預設值。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.INVALIDVIEWPORT.fmt.txt=VIEWMAX 值 ({0}) 必須大於 VIEWMIN 值 ({1})。兩個選項都將使用預設值。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.INVALIDVIEWPORTMAX.fmt.txt=VIEWMAX 值 ({0}) 小於資料最小值。將使用 VIEWMAX 選項的預設值。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.INVALIDVIEWPORTMIN.fmt.txt=VIEWMIN 值 ({0}) 大於資料最大值。將使用 VIEWMIN 選項的預設值。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.timeToLinear.txt=最小或最大日期值超出範圍。座標軸類型將變更為 LINEAR。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.timeToLinear2.txt=時間軸只能支援日期時間值。座標軸類型將變更為 LINEAR。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.tickValueThinned.txt=已細化部分刻度值。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.tgood.fmt.txt=欄格式 {0} 取代為座標軸上的自動產生格式。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.minorinterval.txt=使用者指定的次要刻度間隔與主要刻度間隔不相容。將在座標軸上使用自動產生的次要刻度間隔。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.minorticks.txt=TICKVALUELIST 選項指定不均勻間隔時，不支援 MINORTICKS 或 MINORGRID。未顯示次要刻度或次要網格。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.tickValuePriority.txt=已忽略 TICKVALUEPRIORITY=TRUE，因為尚未指定 TICKVALUELIST 和/或 TICKVALUESEQUENCE 選項。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.tickSequenceIncrement.fmt.txt=INCREMENT={0} 無效。將忽略 TICKVALUESEQUENCE= 選項。
com.sas.graphics.gtl.impl.axis.AbstractAxisRenderer.tickIntervalsBySequence.fmt.txt=TICKVALUESEQUENCE= 選項導致過多 ({0}) 刻度間隔。將會忽略。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayLayoutPane.INCOMPATIBLEOVERLAY.fmt.txt={0} 陳述式與座標軸類型衝突。將不會畫出標繪圖。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayLayoutPane.INCOMPATIBLEINNERMARGINOVERLAY.fmt.txt={0} 陳述式不可以放在 INNERMARGIN 區塊之中。將不會畫出標繪圖。
com.sas.graphics.gtl.impl.renderer.ContentLayoutPane.LEGENDAREAMAX.fmt.txt=由於大小限制，已捨棄一或多個圖形圖例。可嘗試在 ODS Graphics 陳述式提高 LEGENDAREAMAX=、WIDTH=、HEIGHT= 等選項中一個或多個選項的值。。
com.sas.graphics.gtl.impl.legend.DiscreteLegendRenderer.DisplayClipped.txt=DISPLAYCLIPPED=FALSE 的 DISCRETELEGEND 陳述式被裁剪。將不會繪製圖例。
com.sas.graphics.gtl.impl.legend.DiscreteLegendRenderer.NotInGlobalLegend.txt=LAYOUT GLOBALLEGEND 存在時，會忽略不在 LAYOUT GLOBALLEGEND 之下的 DISCRETELEGEND 陳述式。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.AbstractVertexGroupRenderer.AbstractSeriesPlotRenderer.COLORRESPONSE.txt=每個序列的 COLORRESPONSE 欄值必須為常數。將忽略該選項。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.AbstractVertexGroupRenderer.AbstractSeriesPlotRenderer.INVALIDCURVELABEL.txt= CURVELABEL='{0}' 為無效的。使用 GROUP= 選項時，選項值不能是字串。將不會繪製標籤。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.highlowPlot.HighLowPlotRenderer.HIGHLOWDATA.txt=可能畫出不正確的高低圖。無法畫出 LOW 值大於 HIGH 值的長條圖。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.highlowPlot.HighLowPlotRenderer.ENDCAPDISPLAY.txt=使用 TYPE=BAR 時，不支援 ENDCAPDISPLAY={0}。將忽略選項。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.heatBoxParm.HeatBoxParmRenderer.INVALIDBOX.txt=盒鬚圖的資料不完整或無效。盒鬚圖因此將不會畫出。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.bubblePlot.BubblePlotRenderer.BUBBLERADIUSMINMAX.txt=BUBBLERADIUSMAX 必須大於 BUBBLERADIUSMIN。兩個選項都將使用預設值。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.barchart.note.error.bar.invalid.values.txt=使用 GROUPDISPLAY=STACK 或 GROUP100=POSITIVE|MAGNITUDE 選項會抑制誤差線
com.sas.graphics.gtl.impl.renderer.layoutOverlay.barChart.BarChartRenderer.BASELINEINTERCEPT.txt=使用 GROUPDISPLAY=STACK 或 GROUP100=POSITIVE|MAGNITUDE 選項時會忽略 BASELINEINTERCEPT= 選項。基線將會畫在預設值。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.barChart.BarChartRenderer.DROPBARLABELS.txt=長條標籤已隱藏。使用 BARLABELFITTPOLICY=NONE 來強制顯示標籤。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.barChart.BarChartParmRenderer.DROPBARLABELS.txt=資料標籤已隱藏。使用 DATALABELFITPOLICY=NONE 來強制顯示標籤。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.waterfallChart.note.duplicateInitialBar.txt=初始長條值 "INITIALBARTICKVALUE={0}" 複製類別值。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.waterfallChart.note.duplicateFinalBar.txt=最終長條值 "FINALBARTICKVALUE={0}" 複製類別值。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.boxPlot.note.displayStatsForGroupedBoxPlot.txt=分組盒鬚圖不支援 DISPLAYSTATS= 選項。將不會繪製統計值。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.DISCRETEOFFSET.txt=忽略 DISCRETEOFFSET={0}，因為與其他選項衝突。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.scatterPlot.note.errorBars.txt=離散軸上不支援誤差線。將不會繪製誤差線。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.REQUIREDROLEMISSING.fmt.txt={0} 陳述式中缺少必要的 {1}。將不會畫出標繪圖。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.REQUIREDROLEINVALID.fmt.txt={0} 陳述式中必要的 {1} ({2}) 無效。將不會畫出標繪圖。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.REQUIREDDATETIMEROLEINVALID.fmt.txt={0} 陳述式中必要的 {1} ({2}) 無效。選項預期一個日期時間欄。將不會畫出標繪圖。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.REQUIREDPOSROLEINVALID.fmt.txt={0} 陳述式中必要的 {1} ({2}) 無效。選項預期欄中的非零正值。將不會畫出標繪圖。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.REQUIREDPOSINTROLEINVALID.fmt.txt={0} 陳述式中必要的 {1} ({2}) 無效。選項預期欄中只有正整數。將不會畫出標繪圖。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.REQUIREDNONEGROLEINVALID.fmt.txt={0} 陳述式中必要的 {1} ({2}) 無效。選項未預期欄中的負值。將不會畫出標繪圖。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.REQUIREDNUMROLEINVALID.fmt.txt={0} 陳述式中必要的 {1} ({2}) 無效。選項預期欄中的數值。將不會畫出標繪圖。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.REQUIREDSTRINGROLEINVALID.fmt.txt={0} 陳述式中必要的 {1} ({2}) 無效。選項預期欄中的字串。將不會畫出標繪圖。
com.sas.graphics.gtl.impl.renderer.AbstractAnnotationRenderer.INVALIDDRAWSPACE.fmt.txt={0} 無效。已捨棄繪製陳述式。
com.sas.graphics.gtl.impl.renderer.AbstractAnnotationRenderer.INVALIDESIZEUNIT.fmt.txt={0}=資料無效。已捨棄繪製陳述式。
com.sas.graphics.gtl.impl.renderer.AbstractAnnotationRenderer.INVALIDDRAWSTATEMENT.fmt.txt=至少應有 1 個用於 {0} 的有效繪製陳述式。已忽略 {0} 陳述式。
com.sas.graphics.gtl.impl.renderer.AbstractAnnotationRenderer.INVALIDPOSITION.fmt.txt={0} 陳述式具有遺漏/無效的位置值 (X 或 Y)。已捨棄繪製陳述式。
com.sas.graphics.gtl.impl.renderer.AbstractAnnotationRenderer.INVALIDPOINT.fmt.txt={0}= 無效。
com.sas.graphics.gtl.impl.renderer.AbstractAnnotationRenderer.INVALIDIMAGE.fmt.txt=IMAGE={0} 無效。
com.sas.graphics.gtl.impl.renderer.AbstractAnnotationRenderer.INVALIDPATH.fmt.txt=IMAGE={0} 無效。系統找不到檔案。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.bandPlot.BandPlotRenderer.note.GROUPWITHCONSTANTLIMITS.txt=GROUP={0} 無效，當 LIMITUPPER= 選項和 LIMITLOWER= 選項都是數字時，不會使用 GROUP= 選項。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.bandPlot.BandPlotRenderer.note.GROUPWITHCONSTANTCURVELABELUPPER.txt=CURVELABELUPPER='{0}' 無效。使用 GROUP= 選項時，選項值不能是字串。將不會繪製標籤。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.bandPlot.BandPlotRenderer.note.GROUPWITHCONSTANTCURVELABELLOWER.txt=CURVELABELLOWER='{0}' 無效。使用 GROUP= 選項時，選項值不能是字串。將不會繪製標籤。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.NONREQUIREDROLEINVALID.fmt.txt={0} 陳述式中必要的 {1} ({2}) 無效。忽略該指派。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.NONREQUIREDPOSROLEINVALID.fmt.txt={0} 陳述式中的 {1} ({2}) 無效。選項預期欄中的非零正值。忽略該指派。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.NONREQUIREDPOSINTROLEINVALID.fmt.txt={0} 陳述式中的 {1} ({2}) 無效。選項預期欄中只有正整數。已忽略該指派。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.NONREQUIREDNONEGROLEINVALID.fmt.txt={0} 陳述式中的 {1} ({2}) 無效。選項未預期欄中的負值。忽略該指派。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.NONREQUIREDNUMROLEINVALID.fmt.txt={0} 陳述式中必要的 {1} ({2}) 無效。選項預期欄中的數值。忽略該指派。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.NONREQUIREDSTRINGROLEINVALID.fmt.txt={0} 陳述式中的 {1} ({2}) 無效。選項預期欄中的字串。忽略該指派。
com.sas.graphics.gtl.impl.renderer.DataRenderer.UNKNOWN.txt=無法辨識
com.sas.graphics.gtl.impl.renderer.layoutOverlay.dropLine.DropLineRenderer.INCOMPATIBLE_XY_LABEL.txt=(X, Y) 和 LABEL 角色的值數目不同。標籤將不會顯示。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.lineParm.LineParmRenderer.CONST_XYS_COL_LABEL.txt=在 LINEPARM 陳述式中指定 X=、Y= 和 SLOPE= 的常數值時，CURVELABEL={0} 無效。請改用 CURVELABEL="label"。將不會繪製曲線標籤。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.lineParm.LineParmRenderer.COL_XYS_CONST_LABEL.txt=在 LINEPARM 陳述式中為 X=、Y= 和 SLOPE= 中的一或多個指定欄時，CURVELABEL="{0}" 無效。請改用 CURVELABEL=column。將不會繪製曲線標籤。
com.sas.graphics.gtl.impl.util.ImageMapUtilities.tooltip.fmt.txt=由於已達到臨界值，因此已停用至少一個標繪圖的 HTML 資料提示。您可以在 ODS GRAPHICS 陳述式中設定 TIPMAX={0} 來為所有標繪圖產生資料提示。
com.sas.graphics.gtl.layoutRegion.piechart.Warning.txt= 圓形圖包含一些無法顯示的負值或遺漏值。
com.sas.graphics.gtl.layoutRegion.piechart.allZeroOrNegativeWarning.txt= 圓形圖包含全零值或全負值，所以無法顯示。
com.sas.graphics.gtl.layoutRegion.piechart.smallMultipleSomeNegativeOrMissingWarning.txt= 某些圓形圖包含一些無法顯示的負值或遺漏值。
com.sas.graphics.gtl.layoutRegion.piechart.smallMultipleAllZeroOrNegativeWarning.txt= 某些圓形圖包含全零值或全負值，所以無法顯示。
com.sas.graphics.gtl.layoutRegion.mosaicPlot.nonSummarized.txt=MOSAICPLOTPARM 陳述式的資料不適當。MOSAICPLOTPARM 陳述式預期要有預先彙總的資料。馬賽克圖可能無法正確繪製。
com.sas.graphics.gtl.layoutRegion.mosaicPlot.allMissingWarning.fm.txt={0}={1} 無效。該選項預期欄不會包含所有遺漏值。
com.sas.graphics.gtl.layoutRegion.mosaicPlot.negativeWarning.fm.txt={0}={1}無效。此選項未預期欄中有任何負值。
com.sas.graphics.gtl.xml.ModelParser.invalidXmlAttributeValue.fmt.txt={0}={1} 無效。將會使用預設值。
com.sas.graphics.gtl.impl.util.GTLSASLogger.minCannotBeGreaterThanMax.fmt.txt={0} 不能大於 {1}。忽略 {0} 和 {1} 選項。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.histogram.AbstractHistogramRenderer.fillTypeWithDataSkin.fmt.txt=使用 FILLTYPE=GRADIENT 選項時不支援 DATASKIN={0}。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.heatmapParm.HeatmapParmRenderer.continuousLegend.fmt.txt=CONTINUOUSLEGEND 陳述式參考的標繪圖名稱 ({0}) 未指派給任何標繪圖。將會忽略該名稱。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.histogramParm.HistogramParmRenderer.nBinsMax.fmt.txt={0} 陳述式中的箱數為 {1}。其超過 ODS GRAPHICS 陳述式中的 NBINSMAX 臨界值。將不會繪製標繪圖。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.heatmapParm.HeatmapParmRenderer.nXYBinsMax.fmt.txt={0} 陳述式中的箱數為 {1}。其超過 ODS GRAPHICS 陳述式中的 NXYBINSMAX 臨界值。將不會繪製標繪圖。
com.sas.graphics.gtl.impl.renderer.AbstractOverlayRenderer.discreteMax.fmt.txt={0} 陳述式將不會繪製，因為已達到 DISCRETEMAX 的臨界值。您可以在 ODS GRAPHICS 陳述式上設定 DISCRETEMAX={1} 以繪製標繪圖。
com.sas.graphics.gtl.impl.renderer.DataVisualizationRenderer.dataSkinMax.fmt.txt=由於已達到臨界值，因此已停用資料外觀。您可以在 ODS GRAPHICS 陳述式中設定 DATASKINMAX={0} 來還原資料外觀。
com.sas.graphics.gtl.impl.renderer.DataVisualizationRenderer.groupMax.fmt.txt=將會忽略 {2} 陳述式的 {0}={1}，因為已達到 GROUPMAX 的臨界值。您可以在 ODS GRAPHICS 陳述式上設定 GROUPMAX={3} 以啟用 {0} 變數。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.labelMax.fmt.txt=由於已達到臨界值，因此已停用資料標籤衝突迴避。您可以在 ODS GRAPHICS 陳述式中設定 LABELMAX={0} 來還原衝突迴避。
com.sas.graphics.gtl.impl.renderer.layoutDataPanel.LayoutDataPanelRenderer.totalCellMax.fmt.txt=已捨棄 LAYOUT DATAPANEL/DATALATTICE 以避免因潛在的大量儲存格而導致效能降低。您可以在 ODS GRAPHICS 陳述式中設定 TOTALCELLMAX={0} 來中還原版面配置。
com.sas.graphics.gtl.impl.renderer.layoutDataPanel.LayoutDataPanelRenderer.panelCellMax.fmt.txt=儲存格數量超過最大值。將不會建立版面配置。您可以在 ODS GRAPHICS 陳述式中設定 PANELCELLMAX={0} 來還原版面配置。
com.sas.graphics.gtl.impl.renderer.layoutOverlayEquated.LayoutOverlayEquatedToLayoutOverlayConverter.X2orY2Assignment.fmt.txt={0} 陳述式使用其中一個 X2 或 Y2 軸指派。這在 LAYOUT OVERLAYEQAUATED 中不受支援。將不會繪製標繪圖。
com.sas.graphics.gtl.impl.rangeAttributesResolver.invalidRange.fmt.txt=<b><{0}, {1}> 的 </b>RANGE 定義無效或與另一個範圍重疊。將會忽略。
com.sas.graphics.gtl.impl.rangeAttributesResolver.invalidRAM.txt=RANGEATTRMAP 沒有任何有效的輸入。將會使用預設值。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.referenceLine.ReferenceLineRenderer.CONST_XY_COL_LABEL.txt=當 REFERENCELINE 陳述式中指定 X= 或 Y= 的常數值時，CURVELABEL={0} 無效。請改用 CURVELABEL="label"。將不會繪製曲線標籤。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.referenceLine.ReferenceLineRenderer.COL_XY_CONST_LABEL.txt=在 REFERENCELINE 陳述式中為 X= 或 Y= 指定欄時，CURVELABEL="{0}" 無效。請改用 CURVELABEL=column。將不會繪製曲線標籤。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.referenceLine.ReferenceLineRenderer.curveLabel.fmt.txt=已忽略 {0} 陳述式中的 CURVELABEL= 選項，因為其與使用 INCLUDERANGES= 選項的座標軸平行。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.OverlayRenderer.curveLabel.fmt.txt=已忽略 {0} 陳述式中的 CURVELABEL= 選項，因為座標軸使用 INCLUDERANGES= 選項。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.polygonPlot.PolygonPlotRenderer.label.fmt.txt=已忽略 {0} 陳述式中的 LABEL= 選項，因為座標軸使用 INCLUDERANGES= 選項。
com.sas.graphics.gtl.impl.renderer.graphRenderer.colorPriority.txt= 此圖形的 ATTRPRIORITY=COLOR 作用中。DATASYMBOLSD/DATALINEPATTERNS/DATAFILLPATTERNS 的循環是以顏色優先順序為基礎。請參閱關於 ATTRPRIORITY= 選項的 ODS Graphics 文件。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.dendrogram.DendrogramRenderer.note.CLUSTERSNOTDISCRETE.txt=已捨棄 CLUSTERS 小數值。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.dendrogram.DendrogramRenderer.warning.INCOMPATIBLETYPES.txt=將不會繪製 DENDROGRAM，因為 NODEID 和 PARENTID 類型不相容。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.dendrogram.DendrogramRenderer.warning.INCOMPATIBLEFORMATS.txt=將不會繪製 DENDROGRAM，因為 NODEID 和 PARENTID 格式不相容。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.dendrogram.DendrogramRenderer.note.INVALIDNODESDROPPED.txt=已捨棄沒有有效父系節點的節點。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.dendrogram.DendrogramRenderer.warning.DUPLICATEVALUE.txt=將不會繪製 DENDROGRAM，因為 NODEID 值不是唯一的。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.dendrogram.DendrogramRenderer.warning.MULTIPLEROOTS.txt=將不會繪製 DENDROGRAM，因為找到多個根。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.dendrogram.DendrogramRenderer.warning.NOROOT.txt=將不會繪製 DENDROGRAM，因為找不到根。
com.sas.graphics.gtl.impl.renderer.layoutOverlay.dendrogram.DendrogramRenderer.note.DUPLICATELEAFLABEL.txt=LEAFLABEL 值不是唯一的。分葉標籤已停用。com.sas.graphics.gtl.layoutOverlay.waterfallChart.txt=瀑布圖
com.sas.graphics.gtl.layoutOverlay.waterfallChart.finalBar.txt=最終
com.sas.graphics.gtl.layoutOverlay.waterfallChart.initialBar.txt=初始
com.sas.graphics.gtl.layoutOverlay.waterfallChart.legendEntry.increasing.txt=增加
com.sas.graphics.gtl.layoutOverlay.waterfallChart.legendEntry.decreasing.txt=減少
com.sas.graphics.gtl.layoutOverlay.waterfallChart.legendEntry.noChange.txt=無變更
com.sas.graphics.gtl.layoutOverlay.horizontal.txt=水平
com.sas.graphics.gtl.layoutOverlay.vertical.txt=垂直
com.sas.graphics.gtl.layoutOverlay.barchart.txt=長條圖
com.sas.graphics.gtl.layoutOverlay.barchart.warning.duplicate.bar.classification.values.txt=長條圖遇到重複的長條分類資料值，所以無法顯示。
com.sas.graphics.gtl.layoutOverlay.bandPlot.txt=帶狀圖
com.sas.graphics.gtl.layoutOverlay.boxPlot.txt=盒鬚圖
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.MAX.txt=最大鬚值
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.MEAN.txt=平均值
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.MEDIAN.txt=中位數
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.MIN.txt=最小鬚值
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.N.txt=N
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.Q1.txt=第一個四分位值
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.Q3.txt=第三個四分位值
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.STD.txt=資料標準差
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.RANGE.txt=全距
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.IQR.txt=內四分位距
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.OUTLIER.txt=觀測超出上圍籬值和下圍籬值
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.FAROUTLIER.txt=觀測超出上遠圍籬值和下遠圍籬值
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.BOXWIDTH.txt=盒寬度
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.TRUE_MAX.txt=最大值 (包含離群值)
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.TRUE_MIN.txt=最小值 (包含離群值)
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.DATA_MAX.txt=資料最大值
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.DATA_MIN.txt=資料最小值
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxStatsEnum.SUMWGT.txt=加權總和
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.MAX.txt=Max
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.MEAN.txt=Mean
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.MEDIAN.txt=Median
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.MIN.txt=Min
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.N.txt=NoObs
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.Q1.txt=Q1
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.Q3.txt=Q3
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.STD.txt=Std
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.RANGE.txt=Range
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.IQR.txt=IQR
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.DATA_MIN.txt=DataMin
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.DATA_MAX.txt=DataMax
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.TRUE_MIN.txt=TrueMin
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.TRUE_MAX.txt=TrueMax
com.sas.graphics.gtl.layoutOverlay.boxPlot.BoxDisplayStats.SUMWGT.txt=SumWGT
com.sas.graphics.gtl.layoutOverlay.bubblePlot.txt=氣泡圖
com.sas.graphics.gtl.layoutOverlay.contourPlot.txt=等高線圖
com.sas.graphics.gtl.layoutOverlay.contourPlot.ContourPlotRenderState.Warn.FlatContour.txt=因為最小與最大回應值相同，無法顯示資料。
com.sas.graphics.gtl.layoutOverlay.contourPlot.ContourPlotRenderState.Warn.InvalidDataContour.txt=無法顯示資料，因為資料無效或值的數量不足。
com.sas.graphics.gtl.layoutOverlay.dropLine.txt=垂直線
com.sas.graphics.gtl.layoutOverlay.ellipseParm.txt=橢圓形
com.sas.graphics.gtl.layoutOverlay.gauge.txt=測量儀器
com.sas.graphics.gtl.layoutOverlay.heatBox.txt=熱箱
com.sas.graphics.gtl.layoutOverlay.heatMap.txt=熱圖
com.sas.graphics.gtl.layoutOverlay.highLowPlot.txt=高低圖
com.sas.graphics.gtl.layoutOverlay.histogram.txt=直方圖
com.sas.graphics.gtl.layoutOverlay.lineChart.txt=折線圖
com.sas.graphics.gtl.layoutOverlay.lineChart.LineChartRenderState.Warn.UNABLE_TO_STACK_NEGATIVE_VALUES.txt=無法堆疊線條，因為是負值。
com.sas.graphics.gtl.layoutOverlay.lineChart.LineChartRenderState.Warn.UNABLE_TO_STACK_NEGATIVE_VALUES1.txt=警告: 無法堆疊線條
com.sas.graphics.gtl.layoutOverlay.lineChart.LineChartRenderState.Warn.UNABLE_TO_STACK_NEGATIVE_VALUES2.txt=因為是負值。
com.sas.graphics.gtl.layoutOverlay.lineChart.LineChartRenderState.Warn.UNABLE_TO_STACK_MISSING_VALUES2.txt=因為遺漏值或缺少值。
com.sas.graphics.gtl.layoutOverlay.lineChart.LineChartRenderState.Warn.DUPLICATE_LINE_CLASSIFICATION_VALUES.txt=折線圖遇到重複的折線分類資料值，所以無法顯示。
com.sas.graphics.gtl.layoutOverlay.mapLayer.txt=地圖
com.sas.graphics.gtl.layoutOverlay.mapRegionLayer.txt=地圖區域
com.sas.graphics.gtl.layoutOverlay.mapLineLayer.txt=地圖線層
com.sas.graphics.gtl.layoutOverlay.overlayDataInset.txt=重疊資料插入
com.sas.graphics.gtl.layoutOverlay.mixed.txt=混合圖類型
com.sas.graphics.gtl.layoutOverlay.needlePlot.txt=針狀圖
com.sas.graphics.gtl.layoutOverlay.networkPlot.txt=網路圖
com.sas.graphics.gtl.layoutOverlay.onMap.txt={0} (地圖上)
com.sas.graphics.gtl.layoutOverlay.insetOnMap.txt={0} 個地圖插入
com.sas.graphics.gtl.layoutOverlay.mapWithRegion.txt=具地圖區域的地圖
com.sas.graphics.gtl.layoutOverlay.onMapRegion.txt={0} (地圖區域上)
com.sas.graphics.gtl.layoutOverlay.onMapWtihRegion.txt={0} (具地圖區域的地圖上)
com.sas.graphics.gtl.layoutOverlay.referenceLine.txt=參考線
com.sas.graphics.gtl.overlayDataInset.cell.max.fmt.txt=部分資料被截斷，因為該物件只能顯示 {0} 個插入圖表。
com.sas.graphics.gtl.layoutOverlay.seriesPlot.AbstractSeriesPlotRenderer.Warn.UNABLE_TO_STACK_NEGATIVE_VALUES.txt=無法堆疊線條，因為是負值。
com.sas.graphics.gtl.layoutOverlay.seriesPlot.AbstractSeriesPlotRenderer.Warn.UNABLE_TO_STACK_NEGATIVE_VALUES1.txt=警告: 無法堆疊線條
com.sas.graphics.gtl.layoutOverlay.seriesPlot.AbstractSeriesPlotRenderer.Warn.UNABLE_TO_STACK_NEGATIVE_VALUES2.txt=因為是負值。
com.sas.graphics.gtl.layoutOverlay.scatterPlot.txt=散布圖
com.sas.graphics.gtl.layoutOverlay.scatterPlotMatrix.txt=散布圖矩陣
com.sas.graphics.gtl.layoutOverlay.scheduleChart.txt=排程圖
com.sas.graphics.gtl.layoutOverlay.stepPlot.txt=步階圖
com.sas.graphics.gtl.layoutOverlay.timeSeriesPlot.AbstractSeriesPlotRenderer.Warn.DUPLICATE_CLASSIFICATION_VALUES.txt=時間序列圖遇到重複的分類資料值而無法顯示。
com.sas.graphics.gtl.layoutOverlay.vectorPlot.txt=向量圖
com.sas.graphics.gtl.layoutOverlay.Overlay.Warn.NUMBER_OF_LABELS_EXCEED_MAXIMUM_THRESHOLD.txt=不會顯示標籤，因為已超過臨界值。
com.sas.graphics.gtl.layoutOverlay.Overlay.Warn.INVALID_HISTOGRAM_X_VALUES_WARNING.txt = 直方圖的 X 值無效。所有 X 值全部相同或全部遺漏。
com.sas.graphics.gtl.layoutOverlay.waterfallChart.WaterfallChartRenderState.Warn.DUPLICATE_CLASSIFICATION_VALUES.txt=瀑布圖遇到重複的分類資料值，所以無法顯示。
com.sas.graphics.gtl.layoutOverlay.waterfallChart.DUPLICATE_FINAL_BAR_VALUE=最終長條的標籤與資料值相同。
com.sas.graphics.gtl.layoutOverlay.waterfallChart.DUPLICATE_INITIAL_BAR_VALUE=初始長條的標籤與資料值相同。
com.sas.graphics.gtl.layoutOverlay.heatBoxParm.BinTipEnum.FREQUENCY.txt=次數
com.sas.graphics.gtl.layoutOverlay.heatBoxParm.BinTipEnum.LOWER.txt=(較低)
com.sas.graphics.gtl.layoutOverlay.heatBoxParm.BinTipEnum.UPPER.txt=(較高)
com.sas.graphics.gtl.layoutOverlay.paretoline.txt=Pareto 折線
com.sas.graphics.gtl.layoutOverlay.seriesPlot.txt=序列圖
com.sas.graphics.gtl.layoutOverlay.timeSeriesPlot.txt=時間序列圖
com.sas.graphics.gtl.layoutOverlay.scatterPlot.numItemsInCluster.txt=項目數
com.sas.graphics.gtl.layoutOverlay.textPlot.txt=文字標繪圖
com.sas.graphics.gtl.layoutOverlay.dendrogram.txt=系統樹圖
com.sas.graphics.gtl.layoutOverlayMap.OpenStreetMapProvider.Copyright.txt=Map data © OpenStreetMap
com.sas.graphics.gtl.layoutOverlayMap.Pin.Name.txt=名稱
com.sas.graphics.gtl.layoutOverlayMap.Pin.Name.default.fmt.txt=地點釘選 {0}
com.sas.graphics.gtl.layoutOverlayMap.Pin.Address.txt=地址
com.sas.graphics.gtl.layoutOverlayMap.route.From.txt = 自
com.sas.graphics.gtl.layoutOverlayMap.route.To.txt = 至
com.sas.graphics.gtl.layoutOverlayMap.route.Distance.txt = 距離
com.sas.graphics.gtl.layoutOverlayMap.route.Time.txt = 時間
com.sas.graphics.gtl.layoutOverlayMap.route.Waypoint.txt = 路線導航點
com.sas.graphics.gtl.layoutOverlayMap.route.Begin.txt = 路線開始
com.sas.graphics.gtl.layoutOverlayMap.route.End.txt = 路線結束
com.sas.graphics.gtl.layoutOverlayMap.route.type.direct.txt = 直線
com.sas.graphics.gtl.layoutOverlayMap.route.type.driveDistance.txt = 最短行車距離
com.sas.graphics.gtl.layoutOverlayMap.route.type.driveTime.txt = 最短行車時間
com.sas.graphics.gtl.layoutOverlayMap.route.type.walkDistance.txt = 最短步行距離
com.sas.graphics.gtl.layoutOverlayMap.route.type.walkTime.txt = 最短步行時間
com.sas.graphics.gtl.layoutOverlayMap.route.type.truckDistance.txt = 最短貨車運輸距離
com.sas.graphics.gtl.layoutOverlayMap.route.type.truckTime.txt = 最短貨車運輸時間
com.sas.graphics.gtl.layoutOverlayMap.route.type.txt = 路線模式
com.sas.graphics.gtl.layoutOverlayMap.selection.type.txt = 選取方法
com.sas.graphics.gtl.layoutOverlayMap.buffer.Breaks.txt = 間隔
com.sas.graphics.gtl.layoutOverlayMap.buffer.time.fmt.txt = {0} 分鐘
com.sas.graphics.gtl.layoutOverlayMap.buffer.miles.fmt.txt = {0} 英哩
com.sas.graphics.gtl.layoutOverlayMap.buffer.km.fmt.txt = {0} 公里
com.sas.graphics.gtl.layoutOverlayMap.buffer.meters.fmt.txt = {0} 公尺
com.sas.graphics.gtl.layoutOverlayMap.clusteredDataBounds.txt = 重新群集已暫停。目前的地圖界限超過資料的座標空間。
com.sas.graphics.gtl.layoutOverlayMap.region.warning.multiple.classification.values.txt=地圖中的部分區域具有多個分類值。僅會顯示第一個值。
com.sas.graphics.gtl.layoutOverlayMap.lines.warning.multiple.classification.values.txt=地圖中的部分線具有多個分類值。僅會顯示第一個值。
com.sas.graphics.gtl.location.address.info.label=地點
com.sas.graphics.gtl.location.pin.info.label=釘選
com.sas.graphics.gtl.location.search.info.label=搜尋結果
com.sas.graphics.gtl.location.waypoint.info.label=標籤
com.sas.graphics.gtl.location.pin.name.info.msg=釘選 {0}
com.sas.graphics.gtl.location.buffer.info.label=地理區域
com.sas.graphics.gtl.location.buffer.name.info.msg=地理區域 {0}
com.sas.graphics.gtl.location.selection.name.info.msg=選取 {0}
com.sas.graphics.gtl.location.route.info.label=路線
com.sas.graphics.gtl.location.route.type.info.label=行進類型
com.sas.graphics.gtl.location.route.name.info.msg=路線 {0}
com.sas.graphics.gtl.location.route.mode.distance.info.label=距離
com.sas.graphics.gtl.location.route.mode.time.info.label=時間
com.sas.graphics.gtl.location.buffer.miles.info.msg = {0} 英哩
com.sas.graphics.gtl.location.buffer.km.info.msg = {0} 公里
com.sas.graphics.gtl.location.buffer.meters.info.msg = {0} 公尺
com.sas.graphics.gtl.location.buffer.time.info.msg = {0} 分鐘
com.sas.graphics.gtl.location.route.mode.direct.info.label=距離
com.sas.graphics.gtl.location.route.mode.drivingTime.info.label=行車時間
com.sas.graphics.gtl.location.route.mode.drivingDistance.info.label=行車距離
com.sas.graphics.gtl.location.route.mode.truckingTime.info.label=貨車運輸時間
com.sas.graphics.gtl.location.route.mode.truckingDistance.info.label=貨車運輸距離
com.sas.graphics.gtl.location.route.mode.walkingTime.info.label=步行時間
com.sas.graphics.gtl.location.route.mode.walkingDistance.info.label=步行距離
com.sas.graphics.gtl.location.route.fromLocation.info.label=起始地點
com.sas.graphics.gtl.location.route.toLocation.info.label=目標地點
com.sas.graphics.gtl.location.route.locations.count.info.label=地點計數
com.sas.graphics.gtl.location.route.traffic.info.label=交通
com.sas.graphics.gtl.location.route.traffic.typical.info.msg=正常: {0} {1}
com.sas.graphics.gtl.location.route.traffic.sampled.info.msg=抽樣時間 {0} {1} UTC
com.sas.graphics.gtl.layoutOverlayPolar.PolarRadarChart.PolarRadarChartRenderState.Warn.UNABLE_TO_STACK_NEGATIVE_VALUES.txt=無法堆疊雷達，因為是負值。
com.sas.graphics.gtl.layoutOverlayPolar.PolarRadarChart.PolarRadarChartRenderState.Warn.UNABLE_TO_FILL_MISSING_VALUES.txt=填滿樣式需要所有軸的非遺漏資料點。
com.sas.graphics.gtl.layoutOverlayPolar.PolarRadarChart.PolarRadarChartRenderState.Warn.LESS_THAN_THREE_CATEGOTY_VALUES.txt=指派給類別角色的資料項目必須具有至少三個相異值。
com.sas.graphics.gtl.layoutOverlayPolar.PolarRadarChart.PolarRadarChartRenderState.Warn.LESS_THAN_THREE_RESPONSE_ROLES.txt=如果未指派類別角色，則必須指派至少三個量值給座標軸角色。
com.sas.graphics.gtl.layoutOverlayPolar.PolarRadarChart.PolarRadarChartRenderState.Warn.RESPONSE_ALL_MISSING_VALUES.txt=因為當前查詢中的所有列皆含有遺漏值，所以從座標軸角色中刪除了一個或多個量值。
com.sas.graphics.gtl.layoutOverlayPolar.PolarRadarChart.PolarRadarChartRenderState.Warn.DUPLICATE_CLASSIFICATION_VALUES.txt=圖表包含重複的分類值且無法顯示。
com.sas.graphics.gtl.core.itemRenderer.NodeLinkDiagramItem.LABELVALUE.txt= {0}:
com.sas.graphics.gtl.nodeLinkDiagram.lineageDiagram.txt=譜系圖
com.sas.graphics.gtl.nodeLinkDiagram.networkDiagram.txt=網路流程圖
com.sas.graphics.gtl.nodeLinkDiagram.nodeLinkDiagram.txt=節點連結圖
com.sas.graphics.gtl.nodeLinkDiagram.pfd.txt=過程流程圖
com.sas.graphics.gtl.nodeLinkDiagram.sankeyDiagram.txt=Sankey 圖
com.sas.graphics.gtl.nodeLinkDiagram.treeDiagram.txt=樹形圖cldrVersion=43
datePatternLong=yyyy年M月d日EEEE
datePatternMedium=yyyy年M月d日
datePatternShort=yyyy年M月d日
timePatternLong=ahh:mm:ss [zzz]
timePatternMedium=ahh:mm:ss
timePatternShort=ahh:mm
date.0=d/M/yyyy
date.1=yyyy年M月d日
date.2=yyyy年M月d日
date.3=yyyy年M月d日EEEE
day.0=d
downame.0=ccc
downame.1=cccc
mmddyy.0=d/M/yyyy
mmddyy.1=yyyy年M月d日
mmyy.0=M/yyyy
mmyy.1=yyyy年M月
monname.0=M
monname.1=LLL
monname.2=LLLL
monyy.0=yy年M月
monyy.1=yyyy年M月
monyy.2=yyyy年M月
weekdate.0=ccc
weekdate.1=cccc
weekdate.2=yyyy年M月d日EEE
weekdate.3=yyyy年M月d日EEEE
worddate.0=LLL
worddate.1=LLLL
worddate.2=yyyy年M月d日
worddate.3=yyyy年M月d日
year.0=yy年
year.1=yyyy年
datetime.0=d/M/yyyy ahh:mm
datetime.1=yyyy年M月d日 ahh:mm:ss
datetime.2=yyyy年M月d日 ahh:mm:ss [zzz]
datetime.3=yyyy年M月d日EEEE ahh:mm:ss [zzz]
time.0=HH時
time.1=ahh:mm
time.2=ahh:mm:ss
time.3=ahh:mm:ss [zzz]
hour.0=HH時
hour.1=ahh時
hhmm.0=HH時mm分
hhmm.1=ahh時mm分
mmss.0=mm分
mmss.1=mm分ss秒
quarteryear.0=yyyy年QQQ
quarteryear.1=yyyy年QQQQ
compactinterval.0=d日
compactinterval.1=LLL
compactinterval.2=yy年
compactinterval.3=yyyy年
compactinterval.4=d日LLL
compactinterval.5=LLLyy年
compactinterval.6=LLLyyyy年
compactinterval.7=d日LLLyy年
compactinterval.8=d日LLLyyyy年
compactinterval.9=d日LLLyyyy年 HH時
compactinterval.10=d日LLLyyyy年 HH:mm
compactinterval.11=d日LLLyyyy年 HH:mm:ss
quarteryearcp.0=yy:Q
quarteryearcp.1=yyyy:Q
quarteryearcp.2=yy年QQQ
quarteryearcp.3=yyyy年QQQ
dayNames=星期日,星期一,星期二,星期三,星期四,星期五,星期六
dayNamesShort=週日,週一,週二,週三,週四,週五,週六
dayNamesShortest=日,一,二,三,四,五,六
firstDayOfWeek=0
SAdayNames=星期日,星期一,星期二,星期三,星期四,星期五,星期六
SAdayNamesShort=週日,週一,週二,週三,週四,週五,週六
SAdayNamesShortest=日,一,二,三,四,五,六
monthNames=1月,2月,3月,4月,5月,6月,7月,8月,9月,10月,11月,12月
monthNamesShort=1月,2月,3月,4月,5月,6月,7月,8月,9月,10月,11月,12月
monthNamesShortest=1,2,3,4,5,6,7,8,9,10,11,12
SAmonthNames=1月,2月,3月,4月,5月,6月,7月,8月,9月,10月,11月,12月
SAmonthNamesShort=1月,2月,3月,4月,5月,6月,7月,8月,9月,10月,11月,12月
SAmonthNamesShortest=1,2,3,4,5,6,7,8,9,10,11,12
quarterNames=第1季,第2季,第3季,第4季
quarterNamesShort=Q1,Q2,Q3,Q4
quarterNamesShortest=1,2,3,4
SAquarterNames=第1季,第2季,第3季,第4季
SAquarterNamesShort=Q1,Q2,Q3,Q4
SAquarterNamesShortest=1,2,3,4
am=上午
pm=下午
eraADNameShortest=公元
eraADNameShort=公元
eraADNameLong=公元
eraBCNameShortest=公元前
eraBCNameShort=公元前
eraBCNameLong=公元前
currencySymbol=HK$
decimalPoint=.
thousandsSeparator=,
listSeparator=;
percentSymbol=%
plusSign=+
negativeSign=-
exponentialSymbol=E
permileSymbol=‰
infinitySymbol=∞
nanSymbol=非數值
decimalFormat=#,##0.###
percentFormat=#,##0%
currencyFormat=¤#,##0.00
currencyAccountingFormat=¤#,##0.00;(¤#,##0.00)
compactDecimalShort.1000=0K
compactDecimalShort.10000=00K
compactDecimalShort.100000=000K
compactDecimalShort.1000000=0M
compactDecimalShort.10000000=00M
compactDecimalShort.100000000=000M
compactDecimalShort.1000000000=0B
compactDecimalShort.10000000000=00B
compactDecimalShort.100000000000=000B
compactDecimalShort.1000000000000=0T
compactDecimalShort.10000000000000=00T
compactDecimalShort.100000000000000=000T
textDirection=LTR
currencyFormatterPrecision=2
numberFormatterPrecision=2
Invalid.input.log=輸入資料值無效。
Invalid.udf.input.log=資料類型不符。預期的類型為 XML 或字串物件。
MapOperation.EsriCapabilities.txt=無法連線到 Esri 服務 ({0}): {1}
MapOperation.RemoteGeometry.txt=無法擷取幾何: {0}
MapOperation.RemoteGeometryReason.txt=回應無效
MapOperation.RemoteGeometryEmpty.txt=沒有與給定的識別碼相符的幾何。
MapOperation.WindowsCode.txt=Windows 錯誤號碼
MapOperation.EsriDrivetime.txt=無法擷取行車距離資訊: {0}
MapOperation.EsriRoute.txt=無法擷取路線資訊: {0}
MapOperation.EsriSearch.txt=無法擷取搜尋資訊。
MapOperation.EsriSearchEmpty.txt=搜尋「{0}」，沒有傳回結果。
MapOperation.EsriReverseGeocode.txt=此位置無可用資訊。
MapOperation.EsriGeoEnrichment.txt=無法擷取 GeoEnrichment 資訊。
MapOperation.Projection.txt=無法建立資料投影: {0}
MapOperation.MissingMapCoordinates.txt=地圖中沒有顯示部份功能，因為缺少資料的位置資訊。
MapOperation.MissingGeometries.txt=Geo 區域地圖沒有顯示部份區域，因為資料與已知的地理區域不符合。
MapOperation.NoMatchesFound.txt=地圖功能沒有有效的位置資訊。請檢查地理位置類型。
MapOperation.ProjectedPointsMissing.txt=地圖中沒有顯示部份功能，因為無法投影其位置資訊。
MapDataCache.MissingEmbeddedGeometry.txt=幾何無法使用。
EsriDirectoryServices.EsriQuery.txt=擷取 Esri 服務資訊時發生錯誤。
EsriRoutingServices.InvalidLocationError.txt=部分地點不適用於步行或行車路線。至少需要 2 個有效地點。
EsriRoutingServices.SomeInvalidLocationsWarning.txt=部分地點不適用於步行或行車路線。顯示的路線僅包含有效地點。
EsriPortalAuth.NoToken.txt=無法顯示地圖。Esri 自訂服務需要有效的使用者 ID 和密碼，才可產生地圖。或是，密碼可能已過期。
EsriPortalAuth.InvalidToken.txt=目前使用 Esri 伺服器的工作階段已過期。如果工作階段沒有自動重新連線，請退出並重新啟動應用程式。
EsriPortalAuth.Permissions.txt=無法顯示要求的 Esri 地圖 ({0})。請連絡 Esri 管理員以了解您的權限。
EsriGeocodeServices.InvalidInputs.txt=Esri geocoding 服務的輸入無效。
EsriGeocodeServices.EsriError.txt=連線到 Esri 服務 ({0}) 時發生錯誤: {1}
EsriGeoEnrichmentServices.InvalidInputs.txt=Esri GeoEnrichment 服務的輸入無效。
EsriGeoEnrichmentServices.EsriError.txt=連線到 Esri GeoEnrichment 服務 ({0}) 時發生錯誤: {1}
EsriServices.EmptyResults.txt=沒有結果
WKBGeometry.InvalidProjection.txt={0} 地區無法正確投影。請檢查自訂地圖提供者的投影設定。
WKBGeometry.MissingRegions.txt=找不到 {1} 的 {0} 區域。
Asia/Shanghai=北京locale.not.null.txt=地區設定不可以是 Null
date.time.not.null.txt=日期和時間樣式不可以是 Null
date.argument.not.valid.txt=日期樣式引數無效
time.argument.not.valid.txt=時間樣式引數無效
date.time.style.not.none.txt=日期和時間樣式可能不可以是無
date.time.pattern.not.null.txt=模式不可以是 Null
month.names.not.null.txt=月份名稱的名稱樣式和內容不可以是 Null
weekday.names.not.null.txt=工作日名稱的名稱樣式和內容不可以是 NullmissingValue.txt=(遺漏)
subTotal.txt=小計:
total.txt=總計
suppressed.txt=(已隱藏)
expression.description.error.unrecognized.txt = 無法辨識的運算式
expression.description.in.fmt.txt = {0} 在 {1}
expression.description.notIn.fmt.txt = {0} 不在 {1}
expression.description.equalTo.fmt.txt = {0} 是 {1}
expression.description.notEqualTo.fmt.txt = {0} 不是 {1}
expression.description.greaterThan.fmt.txt = {0} 大於 {1}
expression.description.greaterThanEqualTo.fmt.txt = {0} 大於或等於 {1}
expression.description.lessThan.fmt.txt = {0} 小於 {1}
expression.description.lessThanEqualTo.fmt.txt = {0} 小於或等於 {1}
expression.description.between.fmt.txt = {0} 介於 {1} 到 {2} 之間
expression.description.contains.fmt.txt = {0} 包含 {1}
expression.description.notContains.fmt.txt = {0} 不包含 {1}
expression.description.beginsWith.fmt.txt = {0} 的開始文字是 {1}
expression.description.endsWith.fmt.txt = {0} 的結束文字是 {1}
expression.description.missing.fmt.txt = {0} 是遺漏值
expression.description.notMissing.fmt.txt = {0} 非遺漏值
expression.description.after.fmt.txt = {0} 在 {1} 之後開始
expression.description.onOrAfter.fmt.txt = {0} 的開始是 {1} 或在其之後開始
expression.description.before.fmt.txt = {0} 在 {1} 之前結束
expression.description.onOrBefore.fmt.txt = {0} 的結束是 {1} 或在其之前結束
expression.description.compoundAnd.fmt.txt = {0} AND {1}
expression.description.compoundAnd.parenthetical.fmt.txt = ({0}) AND ({1})
expression.description.compoundOr.fmt.txt = {0} OR {1}
expression.description.compoundOr.parenthetical.fmt.txt = ({0}) OR ({1})
expression.description.betweenExcluding.fmt.txt = {0} 介於 {1} 和 {2} 之間 (排除界限)
expression.description.outsideIncluding.fmt.txt = {0} 在 {1} 和 {2} 之外 (包含界限)
expression.description.outsideExcluding.fmt.txt = {0} 在 {1} 和 {2} 之外 (排除界限)
expression.description.anyValue.txt = 任何列中的儲存格值
expression.description.currentValue.txt = 儲存格值
expression.description.anyMeasureValue.txt = 任何量值
expression.description.interface.in.fmt.txt = {0} IN { {1} }
expression.description.interface.notIn.fmt.txt = {0} NOT IN { {1} }
expression.description.interface.missing.fmt.txt = {0} MISSING
expression.description.interface.notMissing.fmt.txt = {0} NOT MISSING
expression.description.interface.contains.fmt.txt = {1} IN {0}
expression.description.interface.notContains.fmt.txt = {1} NOT IN {0}
expression.description.interface.between.fmt.txt = {1} ≤ {0} ≤ {2}
expression.description.interface.betweenExcluding.fmt.txt = {1} < {0} < {2}
expression.description.interface.outsideExcluding.fmt.txt = NOT {1} ≤ {0} ≤ {2}
expression.description.interface.outsideIncluding.fmt.txt = NOT {1} < {0} < {2}
expression.description.interface.upper.fmt.txt = Upper( {0} )
expression.description.interface.lower.fmt.txt = Lower( {0} )
expression.description.interface.pow.fmt.txt = {0} ^ {1}
expression.description.interface.root.fmt.txt = Root[{1}]( {0} )
expression.description.interface.abs.fmt.txt = | {0} |
expression.description.interface.mod.fmt.txt = {0} % {1}
expression.description.interface.round.fmt.txt = Round[{1}]( {0} )
expression.description.interface.log.fmt.txt = Log[{1}]( {0} )
expression.description.interface.cond.fmt.txt = IF {0} THEN {1} ELSE {2}
expression.description.interface.concatenate.fmt.txt = Concat( {0}{,}{1} )
expression.description.interface.find.fmt.txt = Find( {0}{,}{1} )
expression.description.interface.findCharacter.fmt.txt = Find( {0}{,}{1} )
expression.description.interface.length.fmt.txt = Length( {0} )
expression.description.interface.pathBeginsWith.fmt.txt = {0} StartsWith {1}
expression.description.interface.pathEndsWith.fmt.txt = {0} EndsWith {1}
expression.description.interface.pathContains.fmt.txt = {1} IN {0}
expression.description.interface.pathContainsNode.fmt.txt = { {1}{,}{2} } IN {0}
expression.description.interface.cellIndex.fmt.txt = Cell[{0}+{1}]
expression.description.interface.aggregateCells.fmt.txt = {0}( {1} FOR {2}[{3}:{4}] )
expression.description.interface.rows.txt = 列
expression.description.interface.columns.txt = 欄
expression.description.interface.pathContainsSubPath.fmt.txt = ContainsSubPath( {0}{,}{1}{,}{2}{,}{3} )
expression.description.interface.anyMeasure.txt = 任何量值
expression.description.interface.includeMissing.txt = 包含遺漏值
expression.operator.in.txt = 在
expression.operator.notIn.txt = 不在
expression.operator.equals.txt = 等於
expression.operator.notEquals.txt = 不等於
expression.operator.greaterThan.txt = 大於
expression.operator.greaterThanEqualTo.txt = 大於或等於
expression.operator.lessThan.txt = 小於
expression.operator.lessThanEqualTo.txt = 小於或等於
expression.operator.betweenInclusive.txt = 介於 (包含)
expression.operator.betweenExclusive.txt = 介於 (不含)
expression.operator.outsideRangeInclusive.txt = 不是介於 (包含)
expression.operator.outsideRangeExclusive.txt = 不是介於 (不含)
expression.operator.contains.txt = 包含
expression.operator.notContains.txt = 不包含
expression.operator.beginsWith.txt = 開始文字
expression.operator.endsWith.txt = 結束文字
expression.operator.missing.txt = 遺漏
expression.operator.notMissing.txt = 非遺漏
expression.operator.after.txt = 下列項目開始之後:
expression.operator.onOrAfter.txt = 下列項目開始或開始之後:
expression.operator.before.txt = 下列項目結束之前:
expression.operator.onOrBefore.txt = 下列項目結束或結束之前:
expression.operator.and.txt = 且
expression.operator.all.txt = 所有
expression.operator.none.txt = 無
expression.operator.not.txt = 非
ALL_OTHER.txt=所有其他項目
aggregation.minimum.txt = 最小值:
aggregation.maximum.txt = 最大值:
aggregation.total.txt = 總計:
aggregation.count.txt = 計數:
aggregation.sum.txt = 總和:
aggregation.average.txt = 平均:
aggregation.distinct.txt = 相異計數:
aggregation.skew.txt = 偏態:
aggregation.kurtosis.txt = 峰態:
aggregation.coefficientOfVariation.txt = 變異係數:
aggregation.uncorrectedSumOfSquares.txt = 未校正平方和:
aggregation.correctedSumOfSquares.txt = 校正平方和:
aggregation.tStatistic.txt = T 統計值:
aggregation.pValue.txt = P 值:
aggregation.firstQuartile.txt = 第一個四分位值:
aggregation.median.txt = 中位數:
aggregation.thirdQuartile.txt = 第三個四分位值:
aggregation.standardDeviation.txt = 標準差:
aggregation.standardError.txt = 標準誤:
aggregation.variance.txt = 變異數:
aggregation.numberMissing.txt = 遺漏數目:
table.grandTotal.txt = 總計
table.sort.sort.txt = 排序
table.sort.ascending.txt = 遞增
table.sort.descending.txt = 遞減
table.sort.none.txt = 無
table.sort.resetsort.txt = 重新設定排序
table.sparkline.to.txt = 至
table.sparkline.final.txt = 最終
datagrid.rowNumbers.header.txt = 列
crosstab.expand.txt = 展開
crosstab.collapse.txt = 摺疊
crosstab.drill.txt = 鑽取
crosstab.drillInto.fmt.txt = 鑽取到「{0}」
crosstab.pageDown.txt = 跳至下一列
crosstab.pageDownEnd.txt = 跳至最後一列
crosstab.pageUp.txt = 跳至上一列
crosstab.pageUpEnd.txt = 跳至第一列
rangeSlider.currentValues.fmt.txt = {0} 至 {1}
scroll.column.fmt.txt = 第 {0} 欄 (共 {1} 欄)
scroll.row.fmt.txt = 第 {0} 列 (共 {1} 列)
hierarchy.column.txt = 欄階層
hierarchy.row.txt = 列階層
hierarchy.hierarchy.txt = 階層
accessibility.dataElement.hint.txt = 點兩下可以開啟工具提示和選取資料元素。
accessibility.objectType.crosstab.txt = 交叉資料表
accessibility.objectType.dataGrid.txt = 資料格
accessibility.maximized.supplemental.fmt.txt = 最大化物件的 {0}
accessibility.kpi.header.fmt.txt = 群組 = {0}
accessibility.kpi.selection.fmt.txt = {0} / {1}
accessibility.table.rowColumn.fmt.txt = 第 {0} 列；第 {1} 欄
accessibility.table.row.fmt.txt = 第 {0} 列
accessibility.table.column.fmt.txt = 第 {0} 欄
accessibility.table.row.number.single.fmt.txt =  {0} 個列
accessibility.table.column.number.single.fmt.txt = {0} 個欄
accessibility.table.row.number.fmt.txt =  {0} 個列
accessibility.table.column.number.fmt.txt = {0} 個欄
accessibility.table.header.txt = 標題
accessibility.table.sortPrimaryDescending.txt = 主要排序遞減
accessibility.table.sortSecondaryDescending.txt = 次要排序遞減
accessibility.table.sortDescending.txt = 排序遞減
accessibility.table.sortPrimaryAscending.txt = 主要排序遞增
accessibility.table.sortSecondaryAscending.txt = 次要排序遞增
accessibility.table.sortAscending.txt = 排序遞增
accessibility.table.sortEnabled.hint.txt = 點兩下可以開啟排序工具提示。
accessibility.datagrid.rowSelected.txt = 選取的列
accessibility.crosstab.cellSelected.txt = 已選取
accessibility.table.selectRow.hint.txt = 點兩下可以切換列選取項目。
accessibility.table.openTooltip.hint.txt = 點兩下可以開啟工具提示和切換列選取項目。
accessibility.crosstab.selectCell.hint.txt = 點兩下可以切換儲存格選取項目。
accessibility.crosstab.rowTotal.txt = 列總計
accessibility.crosstab.columnTotal.txt = 欄總計
accessibility.crosstab.rowHeader.txt = 列標題
accessibility.crosstab.columnHeader.txt = 欄標題
accessibility.crosstab.rowCategory.txt = 列類別
accessibility.crosstab.columnCategory.txt = 欄類別
accessibility.crosstab.level.fmt.txt = 層級 {0}
accessibility.crosstab.collapsed.txt = 摺疊
accessibility.crosstab.expanded.txt = 展開
accessibility.crosstab.drillable.txt = 連結
accessibility.crosstab.rowColumnSpans.fmt.txt = 橫跨 {0} 欄和 {1} 列
accessibility.crosstab.rowSpans.fmt.txt = 橫跨 {0} 列
accessibility.crosstab.columnSpans.fmt.txt = 橫跨 {0} 欄
accessibility.table.containsKPI.txt = 包含 KPI
accessibility.table.containsSparkline.txt = 包含火花折線圖
accessibility.table.columnTotal.txt = 總計
accessibility.table.noTotal.txt = 沒有欄總計
accessibility.table.missingValue.txt = 遺漏
searchItem.AddressCityRegion.fmt.txt = {0}, {1}, {2}
searchItem.AddressCity.fmt.txt = {0}, {1}
searchItem.AddressRegion.fmt.txt = {0}, {1}
searchItem.CityRegion.fmt.txt = {0}, {1}
route.LessThanAMinute.txt = <1 分鐘
route.DistanceKilometers.fmt.txt = {0} 公里
route.DistanceMiles.fmt.txt = {0} 英哩
route.DistanceMile.fmt.txt = {0} 英哩
route.Minute.fmt.txt = {0} 分鐘
route.HoursMinutes.fmt.txt = {0} 小時 {1} 分鐘
route.Hours.fmt.txt = {0} 小時
tooltip.numberDisplayed.fmt.txt = {0} / {1}
tooltip.colon.fmt.txt = {0}:
displayListSeparator=,
promptbuttonbar.minlabel.txt=W...
zoom.cmd.txt = 按下 Cmd 和滾輪來進行縮放
zoom.ctrl.txt = 按下 Ctrl 和滾輪來進行縮放
posInfinity.lcl=無限
negInfinity.lcl=負無限
graph.txt = 圖形
axisOptions.txt = 座標軸
dataVisualizations.BarChart.txt = 長條圖
dataVisualizations.WaterfallChart.txt = 瀑布圖
dataVisualizations.LineChart.txt = 折線圖
dataVisualizations.PieChart.txt = 圓形圖
dataVisualizations.ScheduleChart.txt = 排程圖
dataVisualizations.ScatterPlot.txt = 散布圖
dataVisualizations.TimeSeriesPlot.txt = 時間序列圖
dataVisualizations.BubblePlot.txt = 氣泡圖
dataVisualizations.BandPlot.txt = 帶狀圖
dataVisualizations.NeedlePlot.txt = 針狀圖
dataVisualizations.StepPlot.txt = 步階圖
dataVisualizations.SeriesPlot.txt = 序列圖
dataVisualizations.VectorPlot.txt = 向量圖
dataVisualizations.Treemap.txt = 樹狀圖
dataVisualizations.TreeMap.txt = 樹狀圖
dataVisualizations.LayoutDataMatrix.txt = 資料驅動
dataVisualizations.MapLayer.txt = Geo 地圖
dataVisualizations.MapRegionLayer.txt = 區域圖 (僅限 Geo)
dataVisualizations.ContourPlot.txt = 等高線圖 (僅限 Geo)
dataVisualizations.MapRegionLayer.titleInReport.txt = 區域圖
dataVisualizations.ContourPlot.titleInReport.txt = 等高線圖
// Data Visualization for VA with slightly different names
vadataVisualizations.BarChart.txt = 長條
vadataVisualizations.WaterfallChart.txt = 瀑布長條
vadataVisualizations.LineChart.txt = 折線
vadataVisualizations.PieChart.txt = 圓形圖
vadataVisualizations.ScheduleChart.txt = 排程圖
vadataVisualizations.ScatterPlot.txt = 散布圖
vadataVisualizations.TimeSeriesPlot.txt = 時間序列
vadataVisualizations.BubblePlot.txt = 氣泡圖
vadataVisualizations.BandPlot.txt = 帶狀圖
vadataVisualizations.NeedlePlot.txt = 針狀圖
vadataVisualizations.StepPlot.txt = 步階
vadataVisualizations.SeriesPlot.txt = 序列
vadataVisualizations.VectorPlot.txt = 向量
vadataVisualizations.Treemap.txt = 樹狀圖
vadataVisualizations.TreeMap.txt = 樹狀圖
vadataVisualizations.LayoutDataMatrix.txt = 資料驅動
vadataVisualizations.MapLayer.txt = Geo 地圖
vadataVisualizations.MapRegionLayer.txt = 區域圖 (僅限 Geo)
vadataVisualizations.ContourPlot.txt = 等高線圖 (僅限 Geo)
vadataVisualizations.MapRegionLayer.titleInReport.txt = 區域圖
vadataVisualizations.ContourPlot.titleInReport.txt = 等高線圖
vadataVisualizations.FitLine.txt = 配適線條
proxies.label.abbreviateNumeric.txt = 縮寫數值
proxies.label.alignment.txt = 對齊
proxies.label.arrangement.txt = 排列方式
proxies.label.arrowHeads.txt = 箭頭
proxies.label.arrowHeadShape.txt = 形狀
proxies.label.attrPriority.txt = 資料元素樣式輪換
proxies.label.axisLabel.txt = 座標軸標籤
proxies.label.axisLine.txt = 座標軸線條
proxies.label.background.txt = 背景
proxies.label.backgroundColor.txt = 背景色彩
proxies.label.backgroundStyle.txt = 背景樣式
proxies.label.barLabelColor.txt = 長條圖標籤色彩
proxies.label.baselineStyle.txt = 基線樣式
proxies.label.border.txt = 框線
proxies.label.breakOnMissingValues.txt = 在遺漏值處中斷
proxies.label.bubbleSizeRange.txt = 氣泡大小範圍
proxies.label.categoricalValuesOverlapHandling.txt = 類別值重疊處理
proxies.label.clusterSpacing.txt = 群集間距
proxies.label.colorByValueChangeDirection.txt = 依值變更的方向著色
proxies.label.combineIntoOther.txt = 將排除的儲存格合併到「所有其他項目」
proxies.label.connectLines.txt = 連接線
proxies.label.connectOrder.txt = 連接順序
proxies.label.dataLabelCategory.txt = 類別
proxies.label.dataLabelCategory.VA.txt = 類別標籤
proxies.label.dataLabelLocation.txt = 位置
proxies.label.dataLabelLocation.VA.txt = 資料標籤位置
proxies.label.dataLabelPercent.txt = 總計的百分比
proxies.label.dataLabels.txt = 資料標籤
proxies.label.dataLabelTextStyle.txt = 資料標籤文字樣式
proxies.label.dataLabelValue.txt = 實際值
proxies.label.dataLabelValue.VA.txt = 實際值
proxies.label.dataPointAlignment.txt = 資料點對齊
proxies.label.decreasingColor.txt = 漸減色彩
proxies.label.direction.txt = 方向
proxies.label.donutHole.txt = 環形洞
proxies.label.donutHoleDiameter.txt = 直徑
proxies.label.donutHoleLabel.txt = 環形洞標籤
proxies.label.donutRingWidth.txt = 環寬度
proxies.label.emptyFill.txt = 無回應區域的填滿
proxies.label.emptyOutline.txt = 無回應區域的外框
proxies.label.extractScale.txt = 擷取比例
proxies.label.fillBaseline.txt = 填滿基線
proxies.label.fillColorOverride.txt = 填滿色彩覆寫
proxies.label.fillColor.txt = 填滿色彩
proxies.label.fillStyle.txt = 填滿樣式
proxies.label.finalBar.txt = 最終 (累積) 長條
proxies.label.fixedBaseline.txt = 固定基線
proxies.label.fixedLabel.txt = 固定標籤
proxies.label.fixedMaximum.txt = 固定最大值
proxies.label.fixedMinimum.txt = 固定最小值
proxies.label.fixedTitle.txt = 固定標題
proxies.label.g100.txt = 群組比例
proxies.label.gridLines.txt = 格線
proxies.label.groupingStyle.txt = 群組樣式
proxies.label.groupLabelBackgroundColor.txt = 群組標籤背景色彩
proxies.label.displayInLegend.txt = 在圖例下顯示
proxies.label.increasingColor.txt = 漸增色彩
proxies.label.initialBar.txt = 初始長條
proxies.label.initialMarkerShape.txt = 初始標記形狀
proxies.label.integersOnly.txt = 僅限整數
proxies.label.label.txt = 標籤
proxies.label.layout.txt = 版面配置
proxies.label.labelPosition.txt = 標籤位置
proxies.label.labelTextColor.txt = 標籤文字色彩
proxies.label.largestBubble.txt = 最大氣泡
proxies.label.levelIndicator.txt = 層級指標
proxies.label.latticeHeadingBackground.txt = 網格標題背景
proxies.label.levelIndicatorColor.txt = 文字色彩
proxies.label.line.txt = 線條
proxies.label.lineStyle.txt = 線條樣式
proxies.label.lineColor.txt = 線條色彩
proxies.label.lineLabelBaseline.horizontal.txt = 水平
proxies.label.lineLabelBaseline.tangent.txt = 跟隨等高線
proxies.label.lineLabelBaseline.txt = 方向
proxies.label.lineLabelPosition.middle.txt = 中間
proxies.label.lineLabelPosition.begin.txt = 開頭
proxies.label.lineLabelPosition.end.txt = 尾部
proxies.label.lineLabelPosition.txt = 位置
proxies.label.linePattern.txt = 線條模式
proxies.label.lineThickness.txt = 線條粗細
proxies.label.lineStyle.txt = 線條樣式
proxies.label.lineStyle.VA.txt = 線條樣式覆寫
proxies.label.logarithmicScale.txt = 對數尺度
proxies.label.logarithmicScaleBase.txt = 基本
proxies.label.logarithmicScaleBase.10.txt = 10
proxies.label.logarithmicScaleBase.2.txt = 2
proxies.label.logarithmicScaleBase.e.txt = e
proxies.label.markerColor.txt = 標記色彩
proxies.label.markerColor.VA.txt = 標記色彩覆寫
proxies.label.markers.txt = 標記
proxies.label.markerSize.txt = 標記大小
proxies.label.markerStyle.txt = 標記樣式
proxies.label.measureValuesOverlapHandling.txt = 量值重疊處理
proxies.label.offset.txt = 位移
proxies.label.otherColor.txt = 其他色彩
proxies.label.otherMinimum.txt = 「其他」的最小百分比
proxies.label.otherMinimum.VA.txt = 「其他」扇形的最小百分比
proxies.label.otherSlice.txt = 將最小值建立為「其他」扇形區
proxies.label.otherSlice.VA.txt = 「其他」扇形
proxies.label.outline.txt = 外框
proxies.label.outlineStyle.txt = 外框樣式
proxies.label.outlineColor.txt = 外框色彩
proxies.label.overlaidGraphColors.txt = 重疊圖形色彩
proxies.label.overlapHandling.txt = 重疊處理
proxies.label.overviewAxis.txt = 概觀座標軸
proxies.label.overviewAxis.contents.txt = 內容
proxies.label.overviewAxis.graphElements.txt = 圖形元素
proxies.label.pieChartStyle.txt = 圖表樣式
proxies.label.pieLabel.txt = 圓形圖標籤
proxies.label.placement.txt = 放置
proxies.label.position.txt = 位置
proxies.label.precision.txt = 精確度位數
proxies.label.reverseOrder.txt = 反向順序
proxies.label.scale.txt = 縮放
proxies.label.segmentLabels.txt = 區段標籤
proxies.label.shortFixedLabel.txt = 短固定標籤
proxies.label.showLegend.txt = 顯示圖例
proxies.label.smallestBubble.txt = 最小氣泡
proxies.label.spacing.txt = 間距
proxies.label.splitTimeValues.txt = 分割時間值
proxies.label.startingPoint.txt = 起始點 (度)
proxies.label.startingPoint.VA.txt = 起始點 (度)
proxies.label.style.txt = 樣式
proxies.label.textColor.txt = 文字色彩
proxies.label.textStyle.txt = 文字樣式
proxies.label.textStyle.dataLabel.txt = 資料標籤文字樣式
proxies.label.textStyle.dataValue.txt = 資料值文字樣式
proxies.label.tickAlignment.txt = 對齊
proxies.label.tickMarks.txt = 刻度標記
proxies.label.tickValues.txt = 刻度值
proxies.label.timeDataInterval.txt = 時間資料間隔
proxies.label.title.txt = 標題
proxies.label.titleTextStyle.txt = 標題文字樣式
proxies.label.valueTextStyle.txt = 值文字樣式
proxies.label.transparency.txt = 透明度
proxies.label.useFilledMarkers.txt = 使用實心標記
proxies.label.value.txt = 值
proxies.label.valuesFormat.txt = 格式
proxies.label.visibility.txt = 可見度
proxies.label.visibility.map.txt = 地圖背景
proxies.label.wallBackground.txt = 牆面背景
proxies.label.wallColor.txt = 牆面色彩
proxies.label.wallOutline.txt = 牆面外框
proxies.label.xAxisRange.txt = X 軸範圍
proxies.label.yaxis.txt = Y 座標軸
proxies.label.yAxisRange.txt = Y 軸範圍
proxies.label.levels.txt = 層級
proxies.label.tickValueDisplay.txt = 刻度值顯示
proxies.label.reduceOverlap.txt = 自動減少重疊
proxies.label.fixedOrientation.txt = 固定方向
proxies.label.dataLabelThinning.txt = 啟用資料標籤薄化
proxies.colors.default.txt = 自動 (預設值)
proxies.colors.fill.background.txt = 背景色彩
proxies.colors.fill.confidence.txt = 信賴色彩
proxies.colors.fill.confidence2.txt = 信賴色彩 2
proxies.colors.fill.dataDecrease.txt = 資料減少色彩
proxies.colors.fill.dataIncrease.txt = 資料增多色彩
proxies.colors.fill.error.txt = 誤差色彩
proxies.colors.fill.final.txt = 最終值色彩
proxies.colors.fill.graphData.txt = 資料色彩{0}
proxies.colors.fill.headerBackground.txt = 標題背景色彩
proxies.colors.fill.initial.txt = 初始值色彩
proxies.colors.fill.kpiOverflow.txt = KPI 溢位色彩
proxies.colors.fill.kpiRange.txt = KPI 範圍色彩{0}
proxies.colors.fill.kpiUnderflow.txt = KPI 降位色彩
proxies.colors.fill.legendBackground.txt = 圖例背景色彩
proxies.colors.fill.missing.txt = 遺漏資料色彩
proxies.colors.fill.other.txt = 其他資料色彩
proxies.colors.fill.outlier.txt = 離群值色彩
proxies.colors.fill.overflow.txt = 溢位色彩
proxies.colors.fill.predictionLimits.txt = 預測界限色彩
proxies.colors.fill.underflow.txt = 降位色彩
proxies.colors.fill.wallBackground.txt = 牆面背景色彩
proxies.colors.line.axis.txt = 座標軸線條色彩
proxies.colors.line.border.txt = 框線色彩
proxies.colors.line.box.txt = 盒線色彩
proxies.colors.line.confidence.txt = 信賴線色彩
proxies.colors.line.confidence2.txt = 信賴線色彩 2
proxies.colors.line.connect.txt = 連接線色彩
proxies.colors.line.dataDecrease.txt = 資料減少線色彩
proxies.colors.line.dataIncrease.txt = 資料增多線色彩
proxies.colors.line.error.txt = 誤差線色彩
proxies.colors.line.final.txt = 最終值線色彩
proxies.colors.line.fit.txt = 配適線條色彩
proxies.colors.line.fit2.txt = 配適線條色彩 2
proxies.colors.line.graphData.txt = 資料線色彩 {0}
proxies.colors.line.grid.txt = 格線色彩
proxies.colors.line.initial.txt = 初始值線色彩
proxies.colors.line.missing.txt = 遺漏資料線色彩
proxies.colors.line.other.txt = 其他資料線色彩
proxies.colors.line.outlier.txt = 離群值線色彩
proxies.colors.line.outline.txt = 外框線色彩
proxies.colors.line.overflow.txt = 溢位線色彩
proxies.colors.line.prediction.txt = 預測線色彩
proxies.colors.line.predictionLimits.txt = 預測界限線色彩
proxies.colors.line.reference.txt = 參考線色彩
proxies.colors.line.underflow.txt = 降位線色彩
proxies.colors.marker.confidence.txt = 信賴標記色彩
proxies.colors.marker.confidence2.txt = 信賴標記色彩 2
proxies.colors.marker.dataDecrease.txt = 資料減少標記色彩
proxies.colors.marker.dataIncrease.txt = 資料增多標記色彩
proxies.colors.marker.error.txt = 誤差標記色彩
proxies.colors.marker.final.txt = 最終值標記色彩
proxies.colors.marker.fit.txt = 最適標記色彩
proxies.colors.marker.fit2.txt = 最適標記色彩 2
proxies.colors.marker.graphData.txt = 資料標記色彩 {0}
proxies.colors.marker.initial.txt = 初始值標記色彩
proxies.colors.marker.missing.txt = 遺漏資料標記色彩
proxies.colors.marker.other.txt = 其他資料標記色彩
proxies.colors.marker.outlier.txt = 離群值標記色彩
proxies.colors.marker.overflow.txt = 溢位標記色彩
proxies.colors.marker.prediction.txt = 預測標記色彩
proxies.colors.marker.predictionLimits.txt = 預測界限標記色彩
proxies.colors.marker.underflow.txt = 降位標記色彩
proxies.colors.text.confidence.txt = 信賴字型色彩
proxies.colors.text.confidence2.txt = 信賴字型色彩 2
proxies.colors.text.data.txt = 資料字型色彩
proxies.colors.text.error.txt = 誤差字型色彩
proxies.colors.text.final.txt = 最終值字型色彩
proxies.colors.text.footnote.txt = 註腳字型色彩
proxies.colors.text.graphData.txt = 資料字型色彩 {0}
proxies.colors.text.initial.txt = 初始值字型色彩
proxies.colors.text.kpiData.txt = KPI 資料字型色彩
proxies.colors.text.kpiRange.txt = KPI 範圍值字型色彩
proxies.colors.text.label.txt = 標籤字型色彩
proxies.colors.text.missing.txt = 遺漏資料字型色彩
proxies.colors.text.other.txt = 其他資料字型色彩
proxies.colors.text.outlier.txt = 離群值字型色彩
proxies.colors.text.overflow.txt = 溢位字型色彩
proxies.colors.text.predictionLimits.txt = 預測界限字型色彩
proxies.colors.text.title.txt = 標題字型色彩
proxies.colors.text.underflow.txt = 降位字型色彩
proxies.colors.text.value.txt = 值字型色彩
proxies.validation.maxValueBelowMin.txt = 必須大於最小值
proxies.validation.minValueAboveMax.txt = 必須小於最大值
proxies.validation.integer.txt = 必須是整數
proxies.validation.largestBubbleBelowMin.txt = 必須比最小氣泡更大
proxies.validation.smallestBubbleAboveMax.txt = 必須比最大氣泡更小
proxies.validation.otherMinimumPercentageRange.txt = 必須在 0% - 50% 之間
proxies.validation.positive.txt = 必須為正數
proxies.validation.between.txt = 必須介於 {0} 和 {1} 之間
proxies.default.finalBarLabel.txt = 最終
proxies.default.initialBarLabel.txt = 初始
proxies.alignment.center.txt = 置中
proxies.alignment.justify.txt = 左右對齊
proxies.alignment.left.txt = 靠左
proxies.alignment.right.txt = 靠右
proxies.alignment.sideBySide.txt = 並排
proxies.alignment.verticalStack.txt = 垂直堆疊
proxies.arrangement.flow.txt = 流程
proxies.arrangement.standard.txt = 標準
proxies.arrangement.toggle.txt = 切換
proxies.arrowHeadShape.barbed.txt = 尖刺
proxies.arrowHeadShape.closed.txt = 閉合
proxies.arrowHeadShape.filled.txt = 填滿
proxies.arrowHeadShape.open.txt = 開放
proxies.attrPriority.auto.txt = 自動
proxies.attrPriority.color.txt = 先輪換所有顏色
proxies.attrPriority.none.txt = 輪換所有特性
proxies.axisRange.differentPerCell.txt = 每一儲存格不同
proxies.axisRange.sameEachColumn.txt = 每一欄內相同
proxies.axisRange.sameEachRow.txt = 每一列內相同
proxies.axisRange.sameForAll.txt = 所有儲存格相同
proxies.border.auto.txt = 自動
proxies.border.off.txt = 關
proxies.border.on.txt = 開
proxies.connectOrder.axis.txt = 座標軸
proxies.connectOrder.values.txt = 資料
proxies.dataLabelLocation.auto.txt = 自動
proxies.dataLabelLocation.automatic.txt = 自動
proxies.dataLabelLocation.callout.txt = 標註
proxies.dataLabelLocation.inside.txt = 內部
proxies.dataLabelLocation.outside.txt = 外部
proxies.dataPointAlignment.center.txt = 置中
proxies.contourType.label.txt = 等高線類型
proxies.contour.fill.txt=填滿
proxies.contour.fillType.txt=類型
proxies.contour.solidFillType.txt=單色
proxies.contour.gradientFillType.txt=漸層
proxies.contour.lineType.txt=線條
proxies.contour.labelType.txt=資料標籤
proxies.dataPointAlignment.left.txt = 靠左
proxies.dataPointAlignment.right.txt = 靠右
proxies.direction.clockwise.txt = 順時針
proxies.direction.counterclockwise.txt = 逆時針
proxies.direction.counterclockwise.VA.txt = 逆時針
proxies.group.dotPlot.label.txt = 散布標記
proxies.fillStyle.fade.txt = 淡化
proxies.fillStyle.solid.txt = 單色
proxies.g100.none.txt = 實際值
proxies.g100.positive.txt = 正規化群組到 100%
proxies.gridLines.auto.txt = 自動
proxies.gridLines.off.txt = 關
proxies.gridLines.on.txt = 開
proxies.groupingStyle.cluster.txt = 群集
proxies.groupingStyle.multiple.txt = 多個
proxies.groupingStyle.overlay.txt = 重疊
proxies.groupingStyle.overlayFilled.txt = 重疊填滿
proxies.groupingStyle.overlaySolidFilled.txt = 重疊填滿 - 實心
proxies.groupingStyle.overlayFadeFilled.txt =  重疊填滿 - 淡化
proxies.groupingStyle.overlayUnfilled.txt = 重疊未填滿
proxies.groupingStyle.stack.txt = 堆疊
proxies.groupingStyle.stackFilled.txt = 堆疊填滿 - 實心
proxies.labelPosition.automatic.txt = 自動
proxies.labelPosition.atInflectionPoints.txt = 在反曲點
proxies.group.overlayName.label.fmt.txt = {0} ({1})
proxies.group.startBubble.label.txt = 開始氣泡
proxies.group.endBubble.label.txt = 結束氣泡
proxies.linePattern.default.txt = 自動 (預設值)
proxies.linePattern.pattern.fmt = 模式 {0}
proxies.linePattern.pattern.fmt.txt = 模式 {0}
proxies.markerSymbol.default.txt = 自動 (預設值)
proxies.markerSymbol.CIRCLE.txt = 圓形
proxies.markerSymbol.PLUS.txt = 加號
proxies.markerSymbol.TRIANGLE.txt = 三角形
proxies.markerSymbol.SQUARE.txt = 正方形
proxies.markerSymbol.X.txt = X
proxies.markerSymbol.TRIANGLE_DOWN.txt = 倒三角形
proxies.markerSymbol.DIAMOND.txt = 菱形
proxies.markerSymbol.ASTERISK.txt = 星號
proxies.markerSymbol.CIRCLE_BOLD.txt = 粗圓形
proxies.markerSymbol.PLUS_BOLD.txt = 粗加號
proxies.markerSymbol.TRIANGLE_BOLD.txt = 粗三角形
proxies.markerSymbol.SQUARE_BOLD.txt = 粗正方形
proxies.markerSymbol.X_BOLD.txt = 粗 X
proxies.markerSymbol.TRIANGLE_DOWN_BOLD.txt = 粗倒三角形
proxies.markerSymbol.DIAMOND_BOLD.txt = 粗菱形
proxies.markerSymbol.ASTERISK_BOLD.txt = 粗星號
proxies.markerSymbol.CIRCLE_FILLED.txt = 填滿圓形
proxies.markerSymbol.CROSS_FILLED.txt = 填滿十字形
proxies.markerSymbol.TRIANGLE_FILLED.txt = 填滿三角形
proxies.markerSymbol.SQUARE_FILLED.txt = 填滿正方形
proxies.markerSymbol.SALTIRE_FILLED.txt = 填滿 X 形
proxies.markerSymbol.TRIANGLE_DOWN_FILLED.txt = 填滿倒三角形
proxies.markerSymbol.DIAMOND_FILLED.txt = 填滿菱形
proxies.markerSymbol.STAR_FILLED.txt = 填滿星形
proxies.markerSymbol.CROSS.txt = 十字形
proxies.markerSymbol.SALTIRE.txt = X 形
proxies.markerSymbol.STAR.txt = 星形
proxies.markerSymbol.HASH.txt = 井字號
proxies.markerSymbol.HOME.txt = 屋形
proxies.markerSymbol.HOME_DOWN.txt = 倒屋形
proxies.markerSymbol.DIAMOND_NARROW.txt = 窄菱形
proxies.markerSymbol.HOME_NARROW.txt = 窄屋形
proxies.markerSymbol.HOME_NARROW_DOWN.txt = 倒窄屋形
proxies.markerSymbol.HOME_BOLD.txt = 粗屋形
proxies.markerSymbol.HOME_DOWN_BOLD.txt = 倒粗屋形
proxies.markerSymbol.HOME_FILLED.txt = 填滿屋形
proxies.markerSymbol.HOME_DOWN_FILLED.txt = 填滿倒屋形
proxies.markerSymbol.DIAMOND_NARROW_FILLED.txt = 填滿窄菱形
proxies.markerSymbol.HOME_NARROW_FILLED.txt = 填滿窄屋形
proxies.markerSymbol.HOME_NARROW_DOWN_FILLED.txt = 填滿倒窄屋形
proxies.markerSymbol.HEXAGON.txt = 六角形
proxies.markerSymbol.HEXAGON_VERTICAL.txt = 垂直六角形
proxies.markerSymbol.HEXAGON_FILLED.txt = 填滿六角形
proxies.markerSymbol.HEXAGON_VERTICAL_FILLED.txt = 填滿垂直六角形
proxies.markerSize.automatic.txt = 自動 (預設值)
proxies.offset.center.txt = 置中
proxies.offset.negative.txt = 負數
proxies.offset.positive.txt = 正數
proxies.orientation.horizontal.txt = 水平
proxies.orientation.vertical.txt = 垂直
proxies.overlaidGraphColors.cycle.txt = 一開始每個圖形皆使用唯一的色彩
proxies.overlaidGraphColors.noCycle.txt = 一開始每個圖形皆使用第一個預設色彩
proxies.overlapHandling.alwaysRotate.txt = 一律旋轉
proxies.overlapHandling.alwaysRotateDropAll.txt = 一律旋轉、捨棄全部
proxies.overlapHandling.auto.txt = 自動
proxies.overlapHandling.dropSome.txt = 捨棄一部分
proxies.overlapHandling.none.txt = 無
proxies.overlapHandling.rotate.txt = 旋轉
proxies.overlapHandling.showAll.txt = 全部顯示
proxies.overlapHandling.stagger.txt = 交錯
proxies.overlapHandling.staggerTruncate.txt = 交錯、截斷
proxies.overlapHandling.staggerTruncateDropAll.txt = 交錯、截斷、捨棄全部
proxies.overlapHandling.staggerTruncateDrop.txt = 交錯、截斷、捨棄
proxies.overlapHandling.truncate.txt = 截斷
proxies.overlapHandling.truncateRotate.txt = 截斷、旋轉
proxies.overlapHandling.autoReduceOverlap.txt = 自動減少重疊
proxies.overlapHandling.fittingSteps.txt = 配適步驟
proxies.overlapHandling.fixedOrientation.txt = 固定方向
proxies.overlapHandling.orientation.txt = 方向
proxies.overlapHandling.horizontal.txt = 水平
proxies.overlapHandling.rotate45.txt = 旋轉 45°
proxies.overlapHandling.rotate45drop.txt = 旋轉 45°、捨棄
proxies.overlapHandling.truncateRotate45.txt = 截斷、旋轉 45°
proxies.pieChartStyle.pie.txt = 圓形
proxies.pieChartStyle.donut.txt = 環形
proxies.placement.top.txt = 上
proxies.placement.topLeft.txt = 左上
proxies.placement.topRight.txt = 右上
proxies.placement.bottom.txt = 下
proxies.placement.bottomLeft.txt = 左下
proxies.placement.bottomRight.txt = 右下
proxies.placement.left.txt = 靠左
proxies.placement.right.txt = 靠右
proxies.position.side.txt = 側邊
proxies.position.top.txt = 上
proxies.scale.automatic.txt = 自動
proxies.scale.3.txt = 千
proxies.scale.4.txt = 萬
proxies.scale.5.txt = 十萬
proxies.scale.6.txt = 百萬
proxies.scale.7.txt = 千萬
proxies.scale.8.txt = 億
proxies.scale.9.txt = 十億
proxies.scale.10.txt = 百億
proxies.scale.11.txt = 千億
proxies.scale.12.txt = 兆
// Old way, which does not utilize locales
proxies.scale.thousands.txt = 千
proxies.scale.millions.txt = 百萬
proxies.scale.billions.txt = 十億
proxies.scale.trillions.txt = 兆
proxies.tickAlignment.betweenMidpoints.txt = 刻度值中點中間
proxies.tickAlignment.midpoint.txt = 於刻度值中點
proxies.timeInterval.auto.txt = 自動
proxies.timeInterval.day.txt = 日
proxies.timeInterval.hour.txt = 小時
proxies.timeInterval.minute.txt = 分
proxies.timeInterval.month.txt = 月
proxies.timeInterval.quarter.txt = 季
proxies.timeInterval.second.txt = 秒
proxies.timeInterval.semiMonth.txt = 半個月
proxies.timeInterval.semiYear.txt = 半年
proxies.timeInterval.tenDay.txt = 10 天期間
proxies.timeInterval.week.txt = 週
proxies.timeInterval.year.txt = 年
proxies.valuesFormat.match.txt = 符合資料格式
proxies.valuesFormat.auto.txt = 自動
proxies.visibility.automatic.txt = 自動
proxies.visibility.hideAll.txt = 全部隱藏
proxies.visibility.hideAll.VA.txt = 全部隱藏
proxies.tickValueDisplay.fittingSteps.txt = 配適步驟:
proxies.tickValueDisplay.orientation.txt = 方向:
proxies.yaxis.y.txt = 靠左
proxies.yaxis.y2.txt = 靠右
proxies.overviewAxis.contents.same.txt = 與主圖形相同
proxies.overviewAxis.contents.custom.txt = 指定圖形元素
dynamicRole.label.txt = 動態角色
dynamicRole.qualifiedLabel.fmt = {0}: {1}
dynamicRole.qualifiedLabel.fmt.txt = {0}: {1}
dynamicRole.category.txt = 類別
dynamicRole.response.txt = 回應
dynamicRole.aggregatedGroup.txt = 群組
dynamicRole.group.txt = 群組
dynamicRole.color.txt = 色彩
dynamicRole.colorResponse.txt = 色彩
dynamicRole.target.txt = 目標
dynamicRole.x.txt = X
dynamicRole.y.txt = Y
dynamicRole.z.txt = 色彩
dynamicRole.tip.txt = 資料提示
dynamicRole.task.txt = 任務
dynamicRole.start.txt = 開始
dynamicRole.end.txt = 完成
dynamicRole.dataLabel.txt = 資料標籤
dynamicRole.dataValues.txt = 資料值
dynamicRole.time.txt = 時間
dynamicRole.size.txt = 大小
dynamicRole.limitUpper.txt = 上限
dynamicRole.limitLower.txt = 下限
dynamicRole.xOrigin.txt = X 原點
dynamicRole.yOrigin.txt = Y 原點
dynamicRole.tileBy.txt = 方塊
dynamicRole.mapCoordinates.txt = 地理 ID
dynamicRole.mapContour.txt = 地理 ID
dynamicRole.mapRegion.txt = 地理 ID
dynamicRole.mapProvider.txt = 地圖供應服務
dynamicRole.mapTip.txt = 資料提示
dynamicRole.cellsGroup.txt = 圖形
dynamicRole.sharedGroup.txt = 共用角色
dynamicRole.latticeGroup.txt = 資料驅動網格角色
dynamicRole.rowVars.txt = 網格列
dynamicRole.columnVars.txt = 網格欄
dynamicRoles.types.any.txt=任何分類
dynamicRoles.types.character.txt=類別
dynamicRoles.types.numeric.txt=量值
dynamicRoles.types.time.txt=日期時間
names.rendererModel.label.fmt.txt = {0} {1}
names.defaultRoleDescription.label.fmt.txt={0} {1}
names.sharedRoleDescription.label.fmt.txt=共用角色 {0}
elements.xaxis.txt = X 座標軸
elements.layoutOverlayMap.txt = 地圖
elements.yaxis.txt = Y 座標軸
elements.y2axis.txt = 右側 Y 座標軸
elements.y1axis.txt = 左側 Y 座標軸
elements.globalLegend.txt = 圖例
elements.discreteLegend.txt = 離散圖例
elements.sizeLegend.txt = 大小圖例
elements.continuousLegend.txt = 連續圖例
elements.sizeLegend.fmt.txt = {0} 大小圖例
elements.continuousLegend.fmt.txt = {0} 連續圖例
multiQueryDataMatrix.error.txt = 當資料網格角色在使用時不允許詳細資料和彙總資料在同一圖形中。此外，資料驅動網格中所有圖形元素都必須使用相同的資料彙總。<br/><br/>在對此圖形的角色進行變更前無法儲存此圖形。<br/><br/>您可以進行下列任一項操作：<ol><li>移除資料驅動網格角色，或</li><li>對圖形元素使用相同的資料彙總</li></ol>
multiQueryDataMatrixDetails.error.fmt.txt = 下列角色使用於彙總：{0}針對未使用列於上方所有角色於彙總的圖表，請增加能彙總資料的「群組」角色或其他類別角色，然後與尚未使用的上述角色共用。
multiQuerySmallMessage.error.txt = 資料驅動網格需要變更
multiQueryPanelMessage.error.txt = 資料驅動網格需要變更
multiQuerySmallMessage.tip.txt = 按一下以取得更多資訊。
emptyOverviewAxisSmallMessage.error.txt=概觀座標軸是空的
emptyOverviewAxis.error.txt=概觀座標軸必須至少包含一個圖形元素。<br/><br/>要先加入圖形元素或關閉概觀座標軸才能儲存圖形。
unassignedRolesDetails.error.fmt.txt=下列共用角色未經任何角色使用：{0}在有未使用的共用角色的情況下，無法儲存此圖形。
dropMessage.dataMatrixOK.txt = 增加到圖形
dropMessage.cellOK.txt = 增加到儲存格
dropMessage.mapOK.txt = 加入地圖
dropMessage.overviewAxisOK.txt = 加至概觀座標軸
dropMessage.overviewAxisNotOK.txt = 與概觀座標軸中的其他元素不相容
dropMessage.overviewAxisNeverOK.txt = 與概觀座標軸不相容
dropMessage.newRowOK.txt = 增加到新列
dropMessage.newColumnOK.txt = 增加到新欄
dropMessage.notCompatibleWithRow.txt = 與此列中的其他元素不相容
dropMessage.notCompatibleWithColumn.txt = 與此欄中的其他元素不相容
dropMessage.notCompatibleWithMap.txt = Geo 元素與多單元格版面配置不相容
dropMessage.latticeOtherCellColumnNotOK.txt = 與此欄中的其他元素座標軸所選資料類型不相容
dropMessage.latticeOtherCellRowNotOK.txt = 與此列中的其他元素座標軸所選資料類型不相容
dropMessage.cellNotOK.txt = 與此儲存格中的其他元素不相容
dropMessage.treemapDataMatrix.txt = 樹狀圖與資料驅動網格角色不相容
dropMessage.mapDataMatrix.txt = 需要地圖的元素與資料驅動網格角色不相容
dropMessage.layoutOverlayMapNotOk.txt = 與 Geo 元素不相容
dropMessage.layoutOverlayMapSingleMapLayerOnly.txt = 無法新增或移動 Geo 地圖層
dropMessage.layoutOverlayMapIncompatibleRoles.txt = 自訂共用角色與 Geo 元素不相容
dropMessage.layoutOverlayMapRequired.txt = Geo 元素與此儲存格中的其他元素不相容
dropMessage.notCompatibleWithDataMatrixRoles.txt = 當資料驅動網格角色在使用時，無法新增列或欄。
dropMessage.layoutOverlayMapMixing.txt = 地圖層與非地圖層不相容
dataMatrix.dataRolesDisabledMultiCell.txt = 範本具有超過一個儲存格時無法使用資料驅動網格角色。
dataMatrix.dataRolesDisabledMap.txt = 資料驅動網格角色不能與 Geo 元素一起使用。
dataMatrix.dataRolesDisabledConflict.txt = 資料驅動網格角色與 {0} 不相容
roleName.CATEGORY_VAR.txt = 類別
roleName.MEASURE_VAR.txt = 量值
roleName.SUBGROUP_VAR.txt = 群組
roleName.GROUPING_VAR.txt = 群組
roleName.HORIZONTAL_SERIES_VAR.txt = 網格欄
roleName.VERTICAL_SERIES_VAR.txt = 網格列
roleName.BAR_MEASURE1_VAR.txt = 量值 (長條)
roleName.BAR_MEASURE2_VAR.txt = 量值 (長條 2)
roleName.BAR_MEASURE_VAR.txt = 量值 (長條)
roleName.LINE_MEASURE_VAR.txt = 量值 (折線)
roleName.LINE_MEASURE1_VAR.txt = 量值 (折線)
roleName.LINE_MEASURE2_VAR.txt = 量值 (折線 2)
roleName.TILE_VAR.txt = 方塊
roleName.X_VAR.txt = X 座標軸
roleName.Y_VAR.txt = Y 座標軸
roleName.SIZE_VAR.txt = 大小
roleName.COLOR_VAR.txt = 色彩
roleName.TARGET_VAR.txt = 目標
roleName.TIME_VAR.txt = 時間軸
roleName.RESPONSE_VAR.txt = 量值 (折線)
roleName.RESPONSE2_VAR.txt = 量值 (折線 2)
roleName.ANIMATION.txt = 動畫
roleName.TIP_VAR.txt = 資料提示值
roleName.WORD_VAR.txt = 文字
roleName.GEO_VAR.txt = 地理位置
roleName.KPI_GROUP_VAR.txt = 群組
roleName.MEASURES_VAR.txt = 量值
roleName.TASK_VAR.txt = 任務
roleName.START_VAR.txt = 開始
roleName.FINISH_VAR.txt = 完成
roleName.LABEL_VAR.txt = 標籤
roleName.X_ORIGIN_VAR.txt = X 原點
roleName.Y_ORIGIN_VAR.txt = Y 原點
roleName.X_START_VAR.txt = X 開始
roleName.X_END_VAR.txt = X 結束
roleName.Y_START_VAR.txt = Y 開始
roleName.Y_END_VAR.txt = Y 結束
roleName.SIZE_START_VAR.txt = 開始大小
roleName.SIZE_END_VAR.txt = 結束大小
roleName.TIME_MEASURE1_VAR.txt = 量值 (時間序列)
roleName.TIME_MEASURE2_VAR.txt = 量值 (時間序列 2)
roleName.HIGH_VAR.txt = 高
roleName.LOW_VAR.txt = 低
roleName.CLOSE_VAR.txt = 收盤價
roleName.MOVING_AVG_VAR.txt = 移動平均
roleName.BOLINGER_UPPER_VAR.txt = 布林上限
roleName.BOLINGER_LOWER_VAR.txt = 布林下限
roleName.BOLLINGER_UPPER_VAR.txt = 布林上限
roleName.BOLLINGER_LOWER_VAR.txt = 布林下限
roleName.VOLUME_VAR.txt = 數量
confirmDialog.continue.txt = 繼續
confirmDialog.cancel.txt = 取消
confirmWarning.barRotate.title.txt = 變更方向
confirmWarning.barRotate.message.txt = 變更此長條圖的方向也將變更其他圖表。是否要繼續?
confirmWarning.changeType.title.txt = 變更分類
confirmWarning.changeType.message.txt = 同一坐標軸上的角色分類必須相同。<br/><br/>變更 {0} 的分類將導致下列角色變更:{1}<br/><br/>是否要繼續?
confirmWarning.reseatVisualizationsInMaps.title.txt = 重設角色
confirmWarning.reseatVisualizationsInMaps.message.txt = 使用地圖來更改版面配置可能會重設角色。是否要繼續?
warning.overviewAxis.lattice.txt = 概觀座標軸無法顯示在多儲存格版面配置中。
warning.overviewAxis.dataMatrix.txt = 使用網格角色時，無法顯示概觀座標軸。
vaviewer.error.stateNotSaved.txt = 無法將報表狀態儲存至伺服器。
vaviewer.error.stateNotReset.txt = 無法在伺服器上重設報表狀態。
vaviewer.error.stateNotSupported.txt = 不支援儲存報表狀態。
vaviewer.error.reportNotSaved.txt = 無法將報表儲存至伺服器。
vaviewer.error.reportNotDeleted.txt = 無法將報表從伺服器刪除。
vaviewer.error.unknownDataType.txt = 無法使用。資料類型未知。
vaviewer.error.tooManyUniqueValues.txt = 無法使用。唯一值過多。
vaviewer.error.stringLengthTooLong.txt = 無法使用。至少一個資料項目太長。
vaviewer.natural.language.vocalization.question.whichPathShouldIUse.txt = 「我該用哪個資料夾？」
vaviewer.natural.language.vocalization.question.whichReportShouldIUse.txt = 「我該用哪份報表？」
vaviewer.natural.language.vocalization.question.whichConnectionShouldIUse.txt = 「我該用哪個伺服器？」
vaviewer.natural.language.vocalization.question.whichPromptShouldIUse.txt = 「我該用哪個篩選控制？」
vaviewer.natural.language.vocalization.question.whichValueShouldIUse.txt = 「我該用哪個值？」
vaviewer.natural.language.vocalization.question.whichVisualizationShouldIUse.txt = 「我該使用哪種視覺化？」
vaviewer.natural.language.vocalization.question.whichPageShouldIUse.txt = 「我該用哪個頁面？」
vaviewer.natural.language.vocalization.question.whichPromptShouldIClear.txt = 「我該清除哪個篩選控制？」
vaviewer.natural.language.vocalization.warning.requiresActiveReport.txt = 我很想幫忙，但我需要一份開啟的報告。
vaviewer.natural.language.vocalization.warning.onFirstPage.txt = 好消息，你在第一頁了。
vaviewer.natural.language.vocalization.warning.onLastPage.txt = 好消息，最後一頁到了。
vaviewer.natural.language.vocalization.warning.reportContainsSinglePage.txt = 這份報告只有一頁。
vaviewer.natural.language.vocalization.warning.reportContainsOnlyNPages.fmt.txt = 這份報告只有 {0} 頁。
vaviewer.natural.language.vocalization.warning.noSuchPageNumber.txt = 很幽默喔，沒有這一頁。
vaviewer.natural.language.vocalization.warning.invalidReport.txt = 這份報告有點問題…它不太合理。
vaviewer.natural.language.vocalization.warning.statementNotUnderstood.txt = 我不太懂你的意思。
vaviewer.natural.language.vocalization.warning.unsupportedFeature.txt = 抱歉，我還沒學會這件事，我還在學習中。
vaviewer.natural.language.vocalization.warning.noVisualsToInspect.txt = 這一頁沒有東西可以檢查。
vaviewer.natural.language.vocalization.warning.unexpectedStateChange.txt = 怎麼了? 那個物件不見了!
vaviewer.natural.language.vocalization.warning.unableToLocate.txt = 唉呀，那個物件已遭移除!
vaviewer.natural.language.vocalization.warning.unableToHelp.txt = 我很想幫忙，但我找不到方法。
vaviewer.natural.language.vocalization.warning.requestWasCancelled.txt = 這個請求已經取消。
vaviewer.natural.language.vocalization.warning.domainLoadStarted.txt = 發生問題。正在修復，這將需要幾分鐘的時間，修復後即可再次為您服務。
vaviewer.natural.language.vocalization.warning.domainLoadInProgress.txt = 正在修復問題並即將完成。修復後即可再次為您服務。
vaviewer.natural.language.vocalization.warning.domainLoadFailed.txt = 發生無法修復的問題，請聯絡您的 SAS 管理員幫助修復。
vaviewer.sidepanel.dateFormat.txt = {0}於{1}
vaviewer.sidepanel.serverLocation.txt = 伺服器
vaviewer.sidepanel.folderLocation.txt = 位置
