![\"Hikvision](\"img/logo-supervibe.png\"){kind=logo}
\n\n \n
\n ![\"Hikvision](\"img/readmemain.png\")
\n
\n\n
\n\nThe Camera Event node connects to **_NVR, Camera, Radars, etc.._** and outputs true/false in case of an alarm. 
\n\nYou can choose from many different alarms, including: 
\n\nReceives \"Intelligent\" / \"Smart\" events from a Hikvision camera or NVR.
\n\nThis node works with Hikvision ANPR cameras.
\n\n**Flow Messages**\n\nThe payload contains the license plate number and the property _plate_ contains other useful informations.\n\n**Output PIN 1**\n\n```javascript\nmsg = {\n topic: \"\",\n payload: \"AB123CD\", // This is the license plate\n plate: {\n captureTime: \"20201130T114200+0100\",\n plateNumber: \"AB123CD\",\n picName: \"202011301142008600\", // This is the picture's name of the license plate.\n country: \"ITA\",\n laneNo: \"1\",\n direction: \"forward\",\n matchingResult: \"otherlist\",\n },\n};\n```\n\n**Output PIN 2 (connection error)**\n\n```javascript\nmsg = {\n topic: \"\",\n errorDescription: \"\", // This will contain the error rescription, in case of errors.\n payload: false, // Or TRUE if error\n _msgid: \"dd5b3622.884a78\",\n};\n```\n\n
\n\nRecalls a PTZ pre-recorded preset.
\n\n**Flow Messages**\n\nThere are now 2 modes:\n\n- **Default mode**: the node outputs **_true_** on PIN 1 when the camera accepts the PTZ goto request (HTTP 2xx response). It does **not** verify that the camera has already physically reached the preset position.\n- **Wait for camera position reached**: after the PTZ goto request is accepted, the node polls the camera PTZ absolute position and outputs **_true_** on PIN 1 only after the position settles. This mode is slower by design and requires camera support for `/ISAPI/PTZCtrl/channels/
\n\nThis node gets a picture from the camera/NVR, ready to be shown in the dashboard UI.
\n\n\n\n```javascript\n[\n {\n id: \"bd6acbb81c4f9eaf\",\n type: \"change\",\n z: \"48095c5671f0ab16\",\n name: \"Setup msg\",\n rules: [\n { t: \"set\", p: \"cid\", pt: \"msg\", to: \"\", tot: \"date\" },\n {\n t: \"set\",\n p: \"attachments\",\n pt: \"msg\",\n to: '[{\\t \"filename\": \\'image_\\' & $replace($now(),\":\",\"_\") & \\'.jpg\\', \\t \"content\": $$.forEmail,\\t \"cid\": \"\" & cid & \"\"\\t}]',\n tot: \"jsonata\",\n },\n { t: \"set\", p: \"topic\", pt: \"msg\", to: \"See attached image\", tot: \"str\" },\n { t: \"set\", p: \"payload\", pt: \"msg\", to: \"''\", tot: \"jsonata\" },\n {\n t: \"set\",\n p: \"from\",\n pt: \"msg\",\n to: \"info@mysupersmarthome.it\",\n tot: \"str\",\n },\n ],\n action: \"\",\n property: \"\",\n from: \"\",\n to: \"\",\n reg: false,\n x: 410,\n y: 200,\n wires: [[\"3e0ca3cc7c0d2e22\"]],\n },\n {\n id: \"0b82f010bd682a0d\",\n type: \"hikvisionUltimatePicture\",\n z: \"48095c5671f0ab16\",\n name: \"Ovest\",\n topic: \"\",\n server: \"eb73371b.af5208\",\n channelID: \"7\",\n rotateimage: \"0\",\n heightimage: \"\",\n widthimage: \"\",\n qualityimage: \"100\",\n cropimage: \"\",\n textoverlay: \"\",\n textoverlayXY: \"\",\n textoverlayWH: \"\",\n textoverlayFont: \"FONT_SANS_64_WHITE\",\n x: 230,\n y: 200,\n wires: [[\"bd6acbb81c4f9eaf\", \"7ff4f0c75ef4d486\"], []],\n },\n {\n id: \"478fee35ffd435b5\",\n type: \"inject\",\n z: \"48095c5671f0ab16\",\n name: \"\",\n props: [{ p: \"payload\" }, { p: \"topic\", vt: \"str\" }],\n repeat: \"\",\n crontab: \"\",\n once: false,\n onceDelay: 0.1,\n topic: \"\",\n payload: \"true\",\n payloadType: \"bool\",\n x: 110,\n y: 200,\n wires: [[\"0b82f010bd682a0d\"]],\n },\n {\n id: \"facefd92c70af183\",\n type: \"comment\",\n z: \"48095c5671f0ab16\",\n name: \"Send an Email with image attachment and show it in the web UI\",\n info: \"\",\n x: 290,\n y: 160,\n wires: [],\n },\n {\n id: \"7ff4f0c75ef4d486\",\n type: \"template\",\n z: \"48095c5671f0ab16\",\n name: \"\",\n field: \"payload\",\n fieldType: \"msg\",\n format: \"handlebars\",\n syntax: \"mustache\",\n template: '![](\"{{{payload}}}\")
',\n output: \"str\",\n x: 400,\n y: 260,\n wires: [[\"121759fa66219f53\"]],\n },\n {\n id: \"121759fa66219f53\",\n type: \"ui_template\",\n z: \"48095c5671f0ab16\",\n group: \"e2be830cd2d143a0\",\n name: \"\",\n order: 0,\n width: \"6\",\n height: \"4\",\n format: '',\n storeOutMessages: true,\n fwdInMessages: true,\n resendOnRefresh: true,\n templateScope: \"local\",\n x: 560,\n y: 260,\n wires: [[]],\n },\n {\n id: \"3e0ca3cc7c0d2e22\",\n type: \"function\",\n z: \"48095c5671f0ab16\",\n name: \"Email\",\n func: \"// Replace this function node with an email node\",\n outputs: 1,\n noerr: 0,\n initialize: \"\",\n finalize: \"\",\n libs: [],\n x: 550,\n y: 200,\n wires: [[]],\n },\n {\n id: \"eb73371b.af5208\",\n type: \"Hikvision-config\",\n host: \"192.168.1.32\",\n port: \"80\",\n name: \"NVR\",\n authentication: \"digest\",\n protocol: \"http\",\n heartbeattimerdisconnectionlimit: \"1\",\n deviceinfo: \"[object Object]\",\n },\n {\n id: \"e2be830cd2d143a0\",\n type: \"ui_group\",\n name: \"Default\",\n tab: \"e0f42233.22428\",\n order: 2,\n disp: true,\n width: \"6\",\n collapse: false,\n },\n {\n id: \"e0f42233.22428\",\n type: \"ui_tab\",\n name: \"NVR\",\n icon: \"dashboard\",\n order: 13,\n },\n];\n```\n\n\n
\n\n**Flow Messages**\n\nThe node outputs the image in in mamy formats on PIN 1, otherwise an error on PIN 2. On PIN 1 you'll have:
\n\n**Copy this code and paste it into your flow**\n\n\n\n```javascript\n[\n {\n id: \"7e79800b.afb8a8\",\n type: \"hikvisionUltimateText\",\n z: \"3f22f0c6.ff1328\",\n name: \"Overlay Text\",\n server: \"eb73371b.af5208\",\n row1: \"\",\n row1XY: \"\",\n row2: \"\",\n row2XY: \"\",\n row3: \"\",\n row3XY: \"\",\n row4: \"\",\n row5XY: \"\",\n channelID: \"1\",\n x: 510,\n y: 120,\n wires: [],\n },\n {\n id: \"3aa8a40f.9a0964\",\n type: \"inject\",\n z: \"3f22f0c6.ff1328\",\n name: \"Go\",\n props: [{ p: \"payload\" }, { p: \"topic\", vt: \"str\" }],\n repeat: \"\",\n crontab: \"\",\n once: false,\n onceDelay: 0.1,\n topic: \"\",\n payload: \"\",\n payloadType: \"date\",\n x: 170,\n y: 120,\n wires: [[\"7e79800b.afb8a8\"]],\n },\n {\n id: \"2b4d9297.75ee46\",\n type: \"comment\",\n z: \"3f22f0c6.ff1328\",\n name: \"Set the overlay text\",\n info: \"\",\n x: 190,\n y: 80,\n wires: [],\n },\n {\n id: \"22dc37f9.b3b86\",\n type: \"function\",\n z: \"3f22f0c6.ff1328\",\n name: \"MSG Override\",\n func: '// Override one or more rows\\n// You can use from row1 to row4 to set the text\\n// and from row1XY to row4XY to set the position in the format x,y (for example: 100,200)\\n\\n// Optionally set the channel. On NVR, this indicates the camera number\\nmsg.channelid = 1;\\n\\n// Row 1\\nmsg.row1 = \"Temperature: \" + msg.payload;\\nmsg.row1XY = \"100,200\"; // Optionallly set the position\\n\\n// Row 2 (here we leave the position previosly set via the camera menu)\\nmsg.row2 = \"Sun\";\\n\\nreturn msg;',\n outputs: 1,\n noerr: 0,\n initialize: \"\",\n finalize: \"\",\n x: 320,\n y: 180,\n wires: [[\"7e79800b.afb8a8\"]],\n },\n {\n id: \"a91e43a0.ccbb2\",\n type: \"inject\",\n z: \"3f22f0c6.ff1328\",\n name: \"Go\",\n props: [{ p: \"payload\" }, { p: \"topic\", vt: \"str\" }],\n repeat: \"\",\n crontab: \"\",\n once: false,\n onceDelay: 0.1,\n topic: \"\",\n payload: \"22°c\",\n payloadType: \"str\",\n x: 170,\n y: 180,\n wires: [[\"22dc37f9.b3b86\"]],\n },\n {\n id: \"eb73371b.af5208\",\n type: \"Hikvision-config\",\n host: \"192.168.1.32\",\n port: \"80\",\n name: \"Server\",\n authentication: \"digest\",\n protocol: \"http\",\n heartbeattimerdisconnectionlimit: \"1\",\n deviceinfo: \"[object Object]\",\n },\n];\n```\n\n\n
\n\n
\n\n**Flow Messages**\n\nThe node outputs a payload on **PIN 1** that can vary, depending on the alarm type sent by the connected device.\nThe node outputs a payload on **PIN 2**, representing a connection error. **_TRUE_** if error, otherwise **_FALSE_**\nThis below is an example of msg output (in this case, a movement detected from a radar)\n\n**Output PIN 1**\n\n```javascript\nmsg = {\n topic: \"\",\n type: \"event\",\n payload: {\n ipAddress: \"192.168.1.25\",\n ipv6Address: \"\",\n portNo: 80,\n protocol: \"HTTP\",\n macAddress: \"banana\",\n channelID: 1,\n dateTime: \"2012-01-13T04:32:47+01:00\",\n activePostCount: 1,\n eventType: \"MultiRadarTargetEvent\",\n eventState: \"active\",\n eventDescription: \"MultiRadar Target Event\",\n MultiRadarTargetEventList: [\n {\n targetID: 25,\n isTargetDisappear: false,\n targetType: \"people\",\n Coordinate: {\n angle: 101.49,\n distance: 24.59,\n },\n speed: -0.2,\n signalStrength: \"strong\",\n TrackedInfoList: [],\n trackedByIPC: false,\n },\n ],\n },\n};\n```\n\n**Output PIN 2 (connection error)**\n\n```javascript\nmsg = {\n topic: \"\",\n errorDescription: \"\", // This will contain the error rescription, in case of errors.\n payload: false, // Or TRUE if error\n};\n```\n\n**Output PIN 3 (Image)**\n\n```javascript\nmsg = {\n topic: \"\",\n type: \"img\",\n payload: image,\n extension: \"jpg\", // Can be \"jpg\" or \"png\"\n};\n```\n\n
\n\n**Copy this code and paste it into your flow**\n\n\n\n```javascript\n[\n {\n id: \"22420ca523840eef\",\n type: \"hikvisionUltimateDoorbell\",\n z: \"48095c5671f0ab16\",\n name: \"\",\n topic: \"\",\n server: \"085ef798e6c04064\",\n ringStatus: \"all\",\n floorNo: \"all\",\n unitNo: \"all\",\n zoneNo: \"all\",\n buildingNo: \"all\",\n x: 360,\n y: 180,\n wires: [[\"5d1eddc07a46bd2c\"], [\"7b5813c6cd794885\"]],\n },\n {\n id: \"5d1eddc07a46bd2c\",\n type: \"debug\",\n z: \"48095c5671f0ab16\",\n name: \"Output\",\n active: true,\n tosidebar: true,\n console: false,\n tostatus: false,\n complete: \"true\",\n targetType: \"full\",\n statusVal: \"\",\n statusType: \"auto\",\n x: 550,\n y: 160,\n wires: [],\n },\n {\n id: \"7b5813c6cd794885\",\n type: \"debug\",\n z: \"48095c5671f0ab16\",\n name: \"Error report\",\n active: true,\n tosidebar: true,\n console: false,\n tostatus: false,\n complete: \"payload\",\n targetType: \"msg\",\n statusVal: \"\",\n statusType: \"auto\",\n x: 570,\n y: 200,\n wires: [],\n },\n {\n id: \"a1032b3b72cf9db6\",\n type: \"inject\",\n z: \"48095c5671f0ab16\",\n name: \"Open Door\",\n props: [\n { p: \"openDoor\", v: \"1\", vt: \"num\" },\n { p: \"topic\", vt: \"str\" },\n ],\n repeat: \"\",\n crontab: \"\",\n once: false,\n onceDelay: 0.1,\n topic: \"\",\n x: 180,\n y: 160,\n wires: [[\"22420ca523840eef\"]],\n },\n {\n id: \"54590a36f409ce0f\",\n type: \"inject\",\n z: \"48095c5671f0ab16\",\n name: \"Hang Up\",\n props: [\n { p: \"hangUp\", v: \"true\", vt: \"bool\" },\n { p: \"topic\", vt: \"str\" },\n ],\n repeat: \"\",\n crontab: \"\",\n once: false,\n onceDelay: \"8\",\n topic: \"\",\n x: 180,\n y: 200,\n wires: [[\"22420ca523840eef\"]],\n },\n {\n id: \"2388a3941360bd3c\",\n type: \"comment\",\n z: \"48095c5671f0ab16\",\n name: 'Doorbell sample. Caution: \"Open Door\" will open your door.',\n info: \"\",\n x: 330,\n y: 120,\n wires: [],\n },\n {\n id: \"085ef798e6c04064\",\n type: \"Doorbell-config\",\n host: \"192.168.1.5\",\n port: \"80\",\n name: \"OUTDOOR STATION\",\n authentication: \"digest\",\n protocol: \"http\",\n heartbeattimerdisconnectionlimit: \"1\",\n deviceinfo:\n '{\"DeviceInfo\":{\"$\":{\"version\":\"2.0\",\"xmlns\":\"http://www.isapi.org/ver20/XMLSchema\"},\"deviceName\":\"OUTDOOR STATION\",\"deviceID\":\"7d49925b-4fc7-406b-a0ec-2ca59cc25838\",\"deviceDescription\":\"\\\\tVis\",\"deviceLocation\":\"STD-CGI\",\"systemContact\":\"STD-CGI\",\"model\":\"DS-KV6113-WPE1(B)\",\"serialNumber\":\"DS-KV6113-WPE1(B)0120210416RRF86332026\",\"macAddress\":\"24:18:c6:39:42:29\",\"firmwareVersion\":\"V2.2.50\",\"firmwareReleasedDate\":\"build 210630\",\"bootVersion\":\"33685554\",\"bootReleasedDate\":\"1377822\",\"hardwareVersion\":\"0x0\",\"encoderVersion\":\"V4.0\",\"encoderReleasedDate\":\"build 181206\",\"deviceType\":\"\\\\tVis\",\"telecontrolID\":\"88\",\"supportBeep\":\"true\",\"supportVideoLoss\":\"true\",\"alarmOutNum\":\"2\",\"alarmInNum\":\"4\",\"RS485Num\":\"1\",\"customizedInfo\":\"\"}}',\n },\n];\n```\n\n\n
\n\nThis node receives all events sent by your AX Pro alarm.
\n\n### Inputs\n\n: armAwayArea (number): Area number (for example 1). Arm Away the selected area.\n: armStayArea (number): Area number (for example 1). Arm Stay the selected area.\n: armAwayAllAreas (boolean): **true** to Arm Away all areas at once.\n: armStayAllAreas (boolean): **true** to Arm Stay all areas at once.\n: disarmArea (number): Area number (for example 1). Disarm the selected area.\n: disarmAllAreas (boolean): **true** to disarm all areas at once.\n: clearAlarmArea (number): Area number (for example 1). Clear alarm of the selected area.\n: clearAllAlarmAreas (boolean): **true** to clear the alarm of all areas at once.\n\nExamples:\n\n```javascript\nmsg.armAwayArea = 1; // To Arm Away Area 1\nmsg.armStayArea = 1; // To Arm Stay Area 1\nmsg.armAwayAllAreas = true; // To Arm Away all areas at once\nmsg.armStayAllAreas = true; // To Arm Stay all areas at once\nmsg.disarmArea = 1; // To Disarm Area 1\nmsg.disarmAllAreas = true; // To disarm all areas at once\nmsg.clearAlarmArea = 1; // To clear alarm on Area 1\nmsg.clearAllAlarmAreas = true; // To clear alarm of all areas at once\nreturn msg;\n```\n\n**Copy this code and paste it into your flow**\n\n
>\n
>\n
>\n
>\n
>\n\n
\n\nThis node receives all events sent by your access control terminal, like, for example the DS-K1T502DBFWX-C.
\n\n
\n\nThis node connects to your Hikvision Speaker and broadcast a selected audio file, that must be already been uploaded to the speaker.