{{configData?.checkListDetails?.checkListName}}
{{section.name}}
{{question.qname}}

Schedule
Runs based on Store Open & Close time
{{configData?.checkListDetails?.schedule === 'onetime' ? 'One-time' : (configData?.checkListDetails?.schedule | titlecase)}}
{{configData?.checkListDetails?.scheduleStartTime ? configData?.checkListDetails?.scheduleStartTime.substr(-8) : configData?.openTime}} to {{configData?.checkListDetails?.scheduleEndTime ? configData?.checkListDetails?.scheduleEndTime.substr(-8) : configData?.closeTime}}
{{configData?.checkListDetails?.configStartDate}} to {{configData?.checkListDetails?.configEndDate}}
Assign
{{coverage | titlecase}}s
{{assignSingle?.length + groupAssign?.length}} {{coverage}}{{(assignSingle?.length + groupAssign?.length) > 1 ? 's':''}}
Edit Questions

Everyday at {{ dayjs(configData.aiConfig.events[0]?.time,'HH:MM').format('hh:mm A') }} for {{configData.aiConfig.events[0]?.duration}} mins Multiple times are allocated for multiple stores
Alerts To
{{getInitials(alert?.name)}} {{alert?.name}}
Alerts To
{{getInitials(alert?.name)}} {{alert?.name}}

Detection Areas

Checklist will run on this Zone

{{getInitials(zone?.name)}} {{zone?.name}}

Assign
Stores
{{this.configData?.storeList?.length}} Store{{this.configData?.storeList?.length > 1 ? 's':''}}
Automatic Task
{{getInitials(approve?.name)}}{{approve?.name}}
@if(['mobileusagedetection','storeopenandclose','uniformdetection','halfshutter'].includes(type)) {

Schedule Checklist

@if(['storeopenandclose','mobileusagedetection','uniformdetection','halfshutter'].includes(type)) {
Set the time to run the checklist
}@else {
Set the desired time to run the checklist
} } @else {

Schedule

}
This checklist will run based on each store’s opening and closing times. You can view or edit store timings in the 'Assign Stores' section below. Download the template, update the timings, and bulk upload your changes
This checklist will run based on each store’s opening and closing times. You can view or edit store timings in the 'Assign Stores' section below. Download the template, update the timings, and bulk upload your changes
The store's open and close times are set in the store configurations. To make changes, please update click here
This AI checklist will initiate detections based on the store's operational hours, starting when the store opens and stopping when it closes.
This AI checklist will initiate detections based on the store's operational hours, starting when the store opens and stopping when it closes.
This checklist will run based on each store’s opening and closing times. You can view or edit store timings in the 'Assign Stores' section below. Download the template, update the timings, and bulk upload your changes
Global Configuration Configure huddle time in a store level for all stores
Store Wise Configuration Configure huddle time in a store level for all stores
Download the template below in the ‘Assign Stores’ section and upload to configure store-wise time to the checklist accordingly.
Start huddle at for a duration of
Add Event

Configuration

Pre-Open Time Configuration
When enabled, this allows detections before store open time
Monitor Store for
minutes before the scheduled open Time
Post-Close Time Configuration
When enabled, this allows detections after store close time
Monitor Store for
minutes after the scheduled close Time
Person Detection Time Threshold
When enabled, detection count is based on the configured time
Flag, If detection of a person exceeds
minutes
For
At  
Ends  
Checklist Configuration
Once On
Starts from
Repeats every
{{ getDateWithSuffix(date) }}
{{ date }}
Ends On
Remove
Occurs on the day {{configData.checkListDetails?.scheduleDate | date:'dd MMM YYYY'}}
Occurs every {{(configData.checkListDetails?.scheduleRepeatedDay?.length && configData.checkListDetails?.scheduleRepeatedDay !=='01') ? configData.checkListDetails?.scheduleRepeatedDay : ''}} weeks on {{selectedDays.toString()}} starting {{configData.checkListDetails?.configStartDate | date:'dd MMM YYYY'}} until {{configData.checkListDetails?.configEndDate | date:'dd MMM YYYY'}}
Occurs every {{(configData.checkListDetails?.scheduleRepeatedDay?.length && configData.checkListDetails?.scheduleRepeatedDay !== '01') ? configData.checkListDetails?.scheduleRepeatedDay : ''}} days starting {{configData.checkListDetails?.configStartDate | date:'dd MMM YYYY'}} until {{configData.checkListDetails?.configEndDate | date:'dd MMM YYYY'}}
Occurs every {{(configData.checkListDetails?.scheduleRepeatedDay?.length && configData.checkListDetails?.scheduleRepeatedDay !== '01') ? configData.checkListDetails?.scheduleRepeatedDay : ''}} months {{(configData.checkListDetails?.scheduleRepeatedMonthSetup === 'day') ? ('on day ' + configData.checkListDetails.scheduleRepeatedMonthWeek) : configData.checkListDetails?.scheduleRepeatedMonthSetup === 'date' ? updateMonthValue(): updateSpecificValue()}} starting {{configData.checkListDetails?.configStartDate | date:'dd MMM YYYY'}} until {{configData.checkListDetails?.configEndDate | date:'dd MMM YYYY'}}
Occurs every {{configData.checkListDetails?.scheduleWeekDays?.toString()}} starting {{configData.checkListDetails?.configStartDate | date:'dd MMM YYYY'}} until {{configData.checkListDetails?.configEndDate | date:'dd MMM YYYY'}}
Response Configuration





Advance Configuration
Checklist Owner
Owners get access to manage the checklist
Can be managed by
Approver
By enabling, the users will be able to approve the checklist
To be approved by
Reminder
By enabling, the users will be reminded in the selected interval
Notify user before
Send Alerts , and {{item}}mins before the checklist end time
Notify Flags
By enabling, all flags will be sent as email
Send To
Approver
Custom
Notify on Recurring Flags
When enabled, emails are sent for recurring flags based on the configured threshold
Send Email if the same question is flagged times by the same store
Once the threshold is reached and an email is sent, the flag count resets to zero
Send To
Approver
Custom
Use same users from Notify Flags
Enable - Daily Report
By Enabling, compliance score will be sent as an email to the above users
Send To
Approver
Custom
Export Submission
Enable this to allow checklist submitters to download their submission as a PDF file
Redo Validity
Redo valid for
Day from Redo creation
Store opens at {{configData?.openTime}} and closes at {{configData?.closeTime}}, everyday.
Time taken to assist by staff <= 1 mins | Staff to customer time spent <=1 mins

Notify Alerts

Send Alert to

Schedule Checklist

Set the desired time to run the checklist
This checklist will run based on each store’s opening and closing time. You can view store timings in the 'Assign Stores' section below.
This checklist will run based on each store’s opening and closing times. You can view or edit store timings in the 'Assign Stores' section below. Download the template, update the timings, and bulk upload your changes
Start Detection for a duration,
minutes after Store Open time for the duration of
minutes
Start Detection Before,
minutes from Store Close time
Start at
Ends at
Start at
Ends at
Add More
Set recurrence
@if(type == 'tvcompliance') { }@else { }
Run at Dynamic Intervals
Repeat every Hours

Occurs every {{recurrencetime}} Hours between Store Open & Close Time {{cleaningTimesSummary}} {{schedulestartTime}} –{{scheduleendTime}}

Run detection randomly within the schedule

Occurs {{recurrencetime}} times at random intervals between Store Open & Close Time {{cleaningTimesSummary}} {{schedulestartTime}} –{{scheduleendTime}}

Detection Configuration

Control checklist logic and alert configurations
Detect Camera angle Change

When enabled, an alert is triggered if any camera angle is changed

IP Change

When enabled, an alert is triggered if IP is Changed

Camera Resolution Change

When enabled, an alert is triggered if any camera resolution is changed

Detection Configuration

Control checklist logic and alert configurations
Table Clutter Detection

When enabled, an alert is triggered if the table is detected to be cluttered with objects for longer than the configured time

Detects, If the table is cluttered for more than the Mins in Detection Areas
Objects Detection

When enabled, an alert is triggered if objects are detected for longer than the configured time

Detect, If Objects are found for more than Mins in Detection Areas
Spill or Debris Detection

When enabled, an alert is triggered if Spill or debris are detected for longer than the configured duration

Detect, If Spill or Debris are detected for more than Mins in Detection Areas
Dining Surface Cleanliness

When enabled, an alert is triggered if unattended plates or unclean dining surfaces are detected beyond the configured duration

Detect, If unattended plates or unclean surfaces are detected for more than Mins in Detection Areas

Detection Configuration

Control checklist logic and alert configurations
You will receive alerts if mopping isn't detected within the set timeframe on your dashboard

Detection Configuration

Control checklist logic and alert configurations
Unattended Detection

Alert is triggered if no supervision is detected beyond the configured time

Detect, if there is no supervision for more than Mins in Detection Areas

Detection Configuration

Control checklist logic and alert configurations
Unattended Threshold Limit

When enabled, an alert is triggered if a customer remains unattended by staff beyond the configured time limit

Detect, if a person remains unattended by staff for more than in Detection Areas

Detection Configuration

Control checklist logic and alert configurations
Count Alert

Alert will be sent based on the configured Staff member Count

Alert, If more than Staff members are detected in a group in detection areas
Time Spent Alert

When enabled, alerts will be sent based on the configured time spent by group

Alert, If a Group detected Spends more than in Detection Areas
Hibernation

When enabled, Checklist will be paused during this time

Starts at Ends
Alert Cooldown

Wait for the configured interval time before sending another alert

Send new alert after since the last alert

Detection Configuration

Control checklist logic and alert configurations
Empty Shelf Alert

When enabled, alerts are triggered if empty shelf is detected

Alert, If an empty shelf is detected for more than Mins in Detection Areas

Detection Configuration

Control checklist logic and alert configurations
Empty Seat Alert

When enabled, alerts will be sent if Empty Seats is detected

Alert, If an empty seat is detected for more than in Detection Areas
Alert Cooldown

When enabled, the system waits for the configured interval time before sending another alert

Send new alert after since the last alert

Detection Configuration

Control checklist logic and alert configurations
Employee count is detected based on configured time

Detection Configuration

Control checklist logic and alert configurations
Helmet Alert

When enabled, alerts will be sent if no helmet is detected

Alert Cooldown

When enabled, the system waits for the configured interval time before sending another alert

Send new alert after since the last alert

Detection Configuration

Control checklist logic and alert configurations
Count Exceed Alert

When enabled, alerts are sent if Object count exceeds configured limit

Alert, If Object count exceeds more than in Detection Areas
Alert Cooldown

When enabled, the system waits for the configured interval time before sending another alert

Send new alert after since the last alert

Detection Configuration

Control checklist logic and alert configurations
Unauthorized Entry Alert

When enabled, alerts will be sent if an unauthorized person is detected in the configured zone

Alert Cooldown

When enabled, the system waits for the configured interval time before sending another alert

Send new alert after since the last alert

Detection Configuration

Control checklist logic and alert configurations
You will receive alerts if mopping isn't detected within the set timeframe on your dashboard

Detection Configuration

Control checklist logic and alert configurations
You will receive alerts if no staff members are present in the store
Set Buffer Time

When enabled, alerts will be paused during the buffer period

If staff is not present in the store for more than mins
Alert Cooldown

When enabled, the system waits for the configured interval time before sending another alert

Send new alert after since the last alert

Detection Areas

Detect mobile usage except
Checklist will run on this Zone
{{item.name}}
Exclude Zone
To add an Excluded Zone inside the store, please upgrade your plan and subscribe to TangoEye.
Upgrade plan

Automatic Task

Select Approver

Detection Configuration

Control checklist logic and alert configurations

Queue Length

When enabled, alerts will be sent based on the configured limit exceeding the queue

Alert, If Queue Length Exceeds more than Person in Detection Areas
Queue Wait Time Alert

When enabled, alerts will be sent when a person spends more than configured time

Alert, If Person Spends more than in Detection Areas
Alert Cooldown

Wait for the configured interval time before sending another alert

Send new alert after since the last alert

Alert Configuration

Alerts will be sent, If the store shutter is left half opened during the configured open & close time
Alerts will be sent, If the event does not occur within the configured time
Alerts will be sent when there's a mismatch between actual and configured store open/close times
Alerts will be sent, when there is a breach happened between the configured time
Allow Buffer Time (Based on Detection Configured)
When enabled, alerts will be paused during the buffer period
Store shutter can remain half-open,
minutes after store open time and
minutes before store close time
Breached Detection Threshold
When enabled, detections over the configured daily limit are flagged as a breach
Flag, as breached if detections exceeds in a day
Detection Configuration
Choose how detection should be applied across cameras
Set Buffer Time
When enabled, alerts will be paused during the buffer period
If Store Open time exceeds by
minutes
If Store Close time exceeds by
minutes
Alert, If mobile usage exceeds
detections per day
Please enter event count between 1 to 999
Push Notifications
@if(!['storeopenandclose','halfshutter'].includes(type)) {
Send notifications to Mobile, Web, or both - Configure as per your needs
}@else {
Send notifications via Mobile, Web, or Email — configure as needed
}
Mobile Notifications
Send to
Web Notifications
Sync users from Mobile
Send to
Send as Email
  • Download Template
Send To
Store
User
Teams
Consolidated breached detections will be sent as email reports to the users added here
Auto-Assign Tasks
On breaches, tasks are auto-created and assigned to users/stores
Assign Task to
Enable Approver
Submitted tasks must be reviewed and actioned by an approver
Send to
Task Validity
Task valid for
from Task creation
Export data
Export your data in the format you need

Assign

Auto assign to newly deployed stores
Selected {{assignType | titlecase}}s
Selected {{assignType | titlecase}}s List
  • Download Template
No data found
There is no result for the {{assignType}}
No data found
There is no result for the {{assignType}}
Store Name
SPOC Name
SPOC Email
Cluster Name
{{data.storeName}} {{data.userName ? data.userName : '--'}} {{data.userEmail ? data.userEmail : '--'}} {{data.clusterName ? data.clusterName : '--'}}
User Name
User Email
Teams Name
{{data.userName}} {{data.userEmail ? data.userEmail : '--'}} {{data.teamName ? data.teamName : '--'}}

or
  • Use the template to upload multiple stores users at once.
  • Download the template here - Download Template
  • Add your data to the Template File
Click To Upload or drag and drop
the data added template file for processing.
No data found
There is no result for the {{assignType}}
Advanced Configuration
Data Processing
When you want to process this checklist report
@if(clientId === '526' && type === 'storeopenandclose') { }@else { }
Live Notifications Triggered immediately whenever a detection or breach occurs
@if(clientId === '526' && type === 'storeopenandclose') { }@else { }
Daily (EOD) Full detection/breach history delivered the next day for smarter decisions
Detected Status
Choose which detections to display on dashboard
Audit Required
Is an audit required for this checklist
Input Source File Type
Is an audit required for this checklist
Bulk Upload
Step 1 - Download the template here
Step2 - Add your data to the Template File with existing store user data
Step3 - Upload it below for processing
**Note : On upload, all the existing data will be replaced
Bulk Upload
Step 1 - Download the template here
Step2 - Add your data to the Template File with existing store user data
Step3 - Upload it below for processing
**Note : On upload, all the existing data will be replaced
Assign Stores Users
{{getStoreCounts(excelData)}}
Total Stores Users
{{excelData?.length}}
Rows processed
{{excelError?.error?.length || 0}}
Error
You're about to assign {{getStoreCounts(excelData)}} storesusers to the checklist. Are you sure want to proceed?
Store {{store}}, that I’m looking for isn’t available, Onboard Stores
User {{store}}, that I’m looking for isn’t available, Onboard Users
Team {{store}}, that I’m looking for isn’t available, Create Team
user {{store}}, that I’m looking for isn’t available, Create Cluster
User {{store}}, that I’m looking for isn’t available, Onboard Users
Store {{store}}, that I’m looking for is inactive, Onboard Stores
Invalid Details !
Please provide correct and complete layout information.
{{i + 1}}) {{error}}

New User found in uploaded file
This CSV contains a new User. Add new User in the User Management under Manage menu.