# upath v1.1.2

[![Build Status](https://travis-ci.org/anodynos/upath.svg?branch=master)](https://travis-ci.org/anodynos/upath)
[![Up to date Status](https://david-dm.org/anodynos/upath.png)](https://david-dm.org/anodynos/upath)

A drop-in replacement / proxy to nodejs's `path` that:

  * Replaces the windows `\` with the unix `/` in all string params & results. This has significant positives - see below.

  * Adds **filename extensions** functions `addExt`, `trimExt`, `removeExt`, `changeExt`, and `defaultExt`.

  * Add a `normalizeSafe` function to preserve any meaningful leading `./` & a `normalizeTrim` which additionally trims any useless ending `/`.

  * Plus a helper `toUnix` that simply converts `\` to `/` and consolidates duplicates.

**Useful note: these docs are actually auto generated from [specs](https://github.com/anodynos/upath/blob/master/source/spec/upath-spec.coffee), running on Linux.**

Notes:

 * `upath.sep` is set to `'/'` for seamless replacement (as of 1.0.3).

 * upath has no runtime dependencies, except built-in `path` (as of 1.0.4)
 
 * travis-ci tested in node versions 4 to 10      

## Why ?

Normal `path` doesn't convert paths to a unified format (ie `/`) before calculating paths (`normalize`, `join`), which can lead to numerous problems.
Also path joining, normalization etc on the two formats is not consistent, depending on where it runs. Running `path` on Windows yields different results than when it runs on Linux / Mac.

In general, if you code your paths logic while developing on Unix/Mac and it runs on Windows, you may run into problems when using `path`.

Note that using **Unix `/` on Windows** works perfectly inside nodejs (and other languages), so there's no reason to stick to the Windows legacy at all.

##### Examples / specs
        

Check out the different (improved) behavior to vanilla `path`:

    `upath.normalize(path)`        --returns-->

          ✓ `'c:/windows/nodejs/path'`           --->      `'c:/windows/nodejs/path'`  // equal to `path.normalize()`
          ✓ `'c:/windows/../nodejs/path'`        --->              `'c:/nodejs/path'`  // equal to `path.normalize()`
          ✓ `'c:\\windows\\nodejs\\path'`        --->      `'c:/windows/nodejs/path'`  // `path.normalize()` gives `'c:\windows\nodejs\path'`
          ✓ `'c:\\windows\\..\\nodejs\\path'`    --->              `'c:/nodejs/path'`  // `path.normalize()` gives `'c:\windows\..\nodejs\path'`
          ✓ `'//windows\\unix/mixed'`            --->         `'/windows/unix/mixed'`  // `path.normalize()` gives `'/windows\unix/mixed'`
          ✓ `'\\windows//unix/mixed'`            --->         `'/windows/unix/mixed'`  // `path.normalize()` gives `'\windows/unix/mixed'`
          ✓ `'////\\windows\\..\\unix/mixed/'`   --->                `'/unix/mixed/'`  // `path.normalize()` gives `'/\windows\..\unix/mixed/'`
        

Joining paths can also be a problem:

    `upath.join(paths...)`        --returns-->

          ✓ `'some/nodejs/deep', '../path'`       --->       `'some/nodejs/path'`  // equal to `path.join()`
          ✓ `'some/nodejs\\windows', '../path'`   --->       `'some/nodejs/path'`  // `path.join()` gives `'some/path'`
          ✓ `'some\\windows\\only', '..\\path'`   --->      `'some/windows/path'`  // `path.join()` gives `'some\windows\only/..\path'`
        

Parsing with `path.parse()` should also be consistent across OSes:

  `upath.parse(path)`        --returns-->

          ✓ `'c:\Windows\Directory\somefile.ext'`      ---> `{ root: '', dir: 'c:/Windows/Directory', base: 'somefile.ext', ext: '.ext', name: 'somefile' }`
                                    // `path.parse()` gives `'{ root: '', dir: '', base: 'c:\\Windows\\Directory\\somefile.ext', ext: '.ext', name: 'c:\\Windows\\Directory\\somefile' }'`
          ✓ `'/root/of/unix/somefile.ext'`             ---> `{ root: '/', dir: '/root/of/unix', base: 'somefile.ext', ext: '.ext', name: 'somefile' }`  // equal to `path.parse()`
    

## Added functions
      

#### `upath.toUnix(path)`

Just converts all `` to `/` and consolidates duplicates, without performing any normalization.

##### Examples / specs

    `upath.toUnix(path)`        --returns-->

        ✓ `'.//windows\//unix//mixed////'`      --->         `'./windows/unix/mixed/'`
        ✓ `'..///windows\..\\unix/mixed'`       --->      `'../windows/../unix/mixed'`
      

#### `upath.normalizeSafe(path)`

Exactly like `path.normalize(path)`, but it keeps the first meaningful `./`.

Note that the unix `/` is returned everywhere, so windows `\` is always converted to unix `/`.

##### Examples / specs & how it differs from vanilla `path`

    `upath.normalizeSafe(path)`        --returns-->

        ✓ `''`                               --->                          `'.'`  // equal to `path.normalize()`
        ✓ `'.'`                              --->                          `'.'`  // equal to `path.normalize()`
        ✓ `'./'`                             --->                         `'./'`  // equal to `path.normalize()`
        ✓ `'.//'`                            --->                         `'./'`  // equal to `path.normalize()`
        ✓ `'.\\'`                            --->                         `'./'`  // `path.normalize()` gives `'.\'`
        ✓ `'.\\//'`                          --->                         `'./'`  // `path.normalize()` gives `'.\/'`
        ✓ `'./..'`                           --->                         `'..'`  // equal to `path.normalize()`
        ✓ `'.//..'`                          --->                         `'..'`  // equal to `path.normalize()`
        ✓ `'./../'`                          --->                        `'../'`  // equal to `path.normalize()`
        ✓ `'.\\..\\'`                        --->                        `'../'`  // `path.normalize()` gives `'.\..\'`
        ✓ `'./../dep'`                       --->                     `'../dep'`  // equal to `path.normalize()`
        ✓ `'../dep'`                         --->                     `'../dep'`  // equal to `path.normalize()`
        ✓ `'../path/dep'`                    --->                `'../path/dep'`  // equal to `path.normalize()`
        ✓ `'../path/../dep'`                 --->                     `'../dep'`  // equal to `path.normalize()`
        ✓ `'dep'`                            --->                        `'dep'`  // equal to `path.normalize()`
        ✓ `'path//dep'`                      --->                   `'path/dep'`  // equal to `path.normalize()`
        ✓ `'./dep'`                          --->                      `'./dep'`  // `path.normalize()` gives `'dep'`
        ✓ `'./path/dep'`                     --->                 `'./path/dep'`  // `path.normalize()` gives `'path/dep'`
        ✓ `'./path/../dep'`                  --->                      `'./dep'`  // `path.normalize()` gives `'dep'`
        ✓ `'.//windows\\unix/mixed/'`        --->      `'./windows/unix/mixed/'`  // `path.normalize()` gives `'windows\unix/mixed/'`
        ✓ `'..//windows\\unix/mixed'`        --->      `'../windows/unix/mixed'`  // `path.normalize()` gives `'../windows\unix/mixed'`
        ✓ `'windows\\unix/mixed/'`           --->        `'windows/unix/mixed/'`  // `path.normalize()` gives `'windows\unix/mixed/'`
        ✓ `'..//windows\\..\\unix/mixed'`    --->              `'../unix/mixed'`  // `path.normalize()` gives `'../windows\..\unix/mixed'`
      

#### `upath.normalizeTrim(path)`

Exactly like `path.normalizeSafe(path)`, but it trims any useless ending `/`.

##### Examples / specs

    `upath.normalizeTrim(path)`        --returns-->

        ✓ `'./'`                          --->                         `'.'`  // `upath.normalizeSafe()` gives `'./'`
        ✓ `'./../'`                       --->                        `'..'`  // `upath.normalizeSafe()` gives `'../'`
        ✓ `'./../dep/'`                   --->                    `'../dep'`  // `upath.normalizeSafe()` gives `'../dep/'`
        ✓ `'path//dep\\'`                 --->                  `'path/dep'`  // `upath.normalizeSafe()` gives `'path/dep/'`
        ✓ `'.//windows\\unix/mixed/'`     --->      `'./windows/unix/mixed'`  // `upath.normalizeSafe()` gives `'./windows/unix/mixed/'`
      

#### `upath.joinSafe([path1][, path2][, ...])`

Exactly like `path.join()`, but it keeps the first meaningful `./`.

Note that the unix `/` is returned everywhere, so windows `\` is always converted to unix `/`.

##### Examples / specs & how it differs from vanilla `path`

    `upath.joinSafe(path)`        --returns-->

        ✓ `'some/nodejs/deep', '../path'`                --->           `'some/nodejs/path'`  // equal to `path.join()`
        ✓ `'./some/local/unix/', '../path'`              --->          `'./some/local/path'`  // `path.join()` gives `'some/local/path'`
        ✓ `'./some\\current\\mixed', '..\\path'`         --->        `'./some/current/path'`  // `path.join()` gives `'some\current\mixed/..\path'`
        ✓ `'../some/relative/destination', '..\\path'`   --->      `'../some/relative/path'`  // `path.join()` gives `'../some/relative/destination/..\path'`
    

## Added functions for *filename extension* manipulation.

**Happy notes:**

  In all functions you can:

  * use both `.ext` & `ext` - the dot `.` on the extension is always adjusted correctly.

  * omit the `ext` param (pass null/undefined/empty string) and the common sense thing will happen.

  * ignore specific extensions from being considered as valid ones (eg `.min`, `.dev` `.aLongExtIsNotAnExt` etc), hence no trimming or replacement takes place on them.

       

#### `upath.addExt(filename, [ext])`

Adds `.ext` to `filename`, but only if it doesn't already have the exact extension.

##### Examples / specs

    `upath.addExt(filename, 'js')`     --returns-->

        ✓ `'myfile/addExt'`           --->           `'myfile/addExt.js'`
        ✓ `'myfile/addExt.txt'`       --->       `'myfile/addExt.txt.js'`
        ✓ `'myfile/addExt.js'`        --->           `'myfile/addExt.js'`
        ✓ `'myfile/addExt.min.'`      --->      `'myfile/addExt.min..js'`
        

It adds nothing if no `ext` param is passed.

    `upath.addExt(filename)`           --returns-->

          ✓ `'myfile/addExt'`           --->              `'myfile/addExt'`
          ✓ `'myfile/addExt.txt'`       --->          `'myfile/addExt.txt'`
          ✓ `'myfile/addExt.js'`        --->           `'myfile/addExt.js'`
          ✓ `'myfile/addExt.min.'`      --->         `'myfile/addExt.min.'`
      

#### `upath.trimExt(filename, [ignoreExts], [maxSize=7])`

Trims a filename's extension.

  * Extensions are considered to be up to `maxSize` chars long, counting the dot (defaults to 7).

  * An `Array` of `ignoreExts` (eg `['.min']`) prevents these from being considered as extension, thus are not trimmed.

##### Examples / specs

    `upath.trimExt(filename)`          --returns-->

        ✓ `'my/trimedExt.txt'`             --->                 `'my/trimedExt'`
        ✓ `'my/trimedExt'`                 --->                 `'my/trimedExt'`
        ✓ `'my/trimedExt.min'`             --->                 `'my/trimedExt'`
        ✓ `'my/trimedExt.min.js'`          --->             `'my/trimedExt.min'`
        ✓ `'../my/trimedExt.longExt'`      --->      `'../my/trimedExt.longExt'`
        

It is ignoring `.min` & `.dev` as extensions, and considers exts with up to 8 chars.

    `upath.removeExt(filename, ['min', '.dev'], 8)`          --returns-->

          ✓ `'my/trimedExt.txt'`              --->                  `'my/trimedExt'`
          ✓ `'my/trimedExt.min'`              --->              `'my/trimedExt.min'`
          ✓ `'my/trimedExt.dev'`              --->              `'my/trimedExt.dev'`
          ✓ `'../my/trimedExt.longExt'`       --->               `'../my/trimedExt'`
          ✓ `'../my/trimedExt.longRExt'`      --->      `'../my/trimedExt.longRExt'`
      

#### `upath.removeExt(filename, ext)`

Removes the specific `ext` extension from filename, if it has it. Otherwise it leaves it as is.
As in all upath functions, it be `.ext` or `ext`.

##### Examples / specs

    `upath.removeExt(filename, '.js')`          --returns-->

        ✓ `'removedExt.js'`          --->          `'removedExt'`
        ✓ `'removedExt.txt.js'`      --->      `'removedExt.txt'`
        ✓ `'notRemoved.txt'`         --->      `'notRemoved.txt'`
      

#### `upath.changeExt(filename, [ext], [ignoreExts], [maxSize=7])`

Changes a filename's extension to `ext`. If it has no (valid) extension, it adds it.

  * Valid extensions are considered to be up to `maxSize` chars long, counting the dot (defaults to 7).

  * An `Array` of `ignoreExts` (eg `['.min']`) prevents these from being considered as extension, thus are not changed - the new extension is added instead.

##### Examples / specs

    `upath.changeExt(filename, '.js')`  --returns-->

        ✓ `'my/module.min'`            --->                `'my/module.js'`
        ✓ `'my/module.coffee'`         --->                `'my/module.js'`
        ✓ `'my/module'`                --->                `'my/module.js'`
        ✓ `'file/withDot.'`            --->             `'file/withDot.js'`
        ✓ `'file/change.longExt'`      --->      `'file/change.longExt.js'`
        

If no `ext` param is given, it trims the current extension (if any).

    `upath.changeExt(filename)`        --returns-->

          ✓ `'my/module.min'`            --->                   `'my/module'`
          ✓ `'my/module.coffee'`         --->                   `'my/module'`
          ✓ `'my/module'`                --->                   `'my/module'`
          ✓ `'file/withDot.'`            --->                `'file/withDot'`
          ✓ `'file/change.longExt'`      --->         `'file/change.longExt'`
        

It is ignoring `.min` & `.dev` as extensions, and considers exts with up to 8 chars.

    `upath.changeExt(filename, 'js', ['min', '.dev'], 8)`        --returns-->

          ✓ `'my/module.coffee'`          --->                 `'my/module.js'`
          ✓ `'file/notValidExt.min'`      --->      `'file/notValidExt.min.js'`
          ✓ `'file/notValidExt.dev'`      --->      `'file/notValidExt.dev.js'`
          ✓ `'file/change.longExt'`       --->               `'file/change.js'`
          ✓ `'file/change.longRExt'`      --->      `'file/change.longRExt.js'`
      

#### `upath.defaultExt(filename, [ext], [ignoreExts], [maxSize=7])`

Adds `.ext` to `filename`, only if it doesn't already have _any_ *old* extension.

  * (Old) extensions are considered to be up to `maxSize` chars long, counting the dot (defaults to 7).

  * An `Array` of `ignoreExts` (eg `['.min']`) will force adding default `.ext` even if one of these is present.

##### Examples / specs

    `upath.defaultExt(filename, 'js')`   --returns-->

        ✓ `'fileWith/defaultExt'`              --->              `'fileWith/defaultExt.js'`
        ✓ `'fileWith/defaultExt.js'`           --->              `'fileWith/defaultExt.js'`
        ✓ `'fileWith/defaultExt.min'`          --->             `'fileWith/defaultExt.min'`
        ✓ `'fileWith/defaultExt.longExt'`      --->      `'fileWith/defaultExt.longExt.js'`
        

If no `ext` param is passed, it leaves filename intact.

    `upath.defaultExt(filename)`       --returns-->

          ✓ `'fileWith/defaultExt'`              --->                 `'fileWith/defaultExt'`
          ✓ `'fileWith/defaultExt.js'`           --->              `'fileWith/defaultExt.js'`
          ✓ `'fileWith/defaultExt.min'`          --->             `'fileWith/defaultExt.min'`
          ✓ `'fileWith/defaultExt.longExt'`      --->         `'fileWith/defaultExt.longExt'`


It is ignoring `.min` & `.dev` as extensions, and considers exts with up to 8 chars.

    `upath.defaultExt(filename, 'js', ['min', '.dev'], 8)` --returns-->

          ✓ `'fileWith/defaultExt'`               --->               `'fileWith/defaultExt.js'`
          ✓ `'fileWith/defaultExt.min'`           --->           `'fileWith/defaultExt.min.js'`
          ✓ `'fileWith/defaultExt.dev'`           --->           `'fileWith/defaultExt.dev.js'`
          ✓ `'fileWith/defaultExt.longExt'`       --->          `'fileWith/defaultExt.longExt'`
          ✓ `'fileWith/defaultExt.longRext'`      --->      `'fileWith/defaultExt.longRext.js'`


Copyright(c) 2014-2017 Angelos Pikoulas (agelos.pikoulas@gmail.com)

Permission is hereby granted, free of charge, to any person
obtaining a copy of this software and associated documentation
files (the "Software"), to deal in the Software without
restriction, including without limitation the rights to use,
copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following
conditions:

The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.

97 passing (33ms)
